Methods of characterizing the distribution of exhaust emissions from light-duty, gasoline-powered motor vehicles in the U.S. fleet

Mobile sources significantly contribute to ambient concentrations of airborne particulate matter (PM). Source apportionment studies for PM10 (PM < or = 10 microm in aerodynamic diameter) and PM2.5 (PM < or = 2.5 microm in aerodynamic diameter) indicate that mobile sources can be responsible for over half of the ambient PM measured in an urban area. Recent source apportionment studies attempted to differentiate between contributions from gasoline and diesel motor vehicle combustion. Several source apportionment studies conducted in the United States suggested that gasoline combustion from mobile sources contributed more to ambient PM than diesel combustion. However, existing emission inventories for the United States indicated that diesels contribute more than gasoline vehicles to ambient PM concentrations. A comprehensive testing program was initiated in the Kansas City metropolitan area to measure PM emissions in the light-duty, gasoline-powered, on-road mobile source fleet to provide data for PM inventory and emissions modeling. The vehicle recruitment design produced a sample that could represent the regional fleet, and by extension, the national fleet. All vehicles were recruited from a stratified sample on the basis of vehicle class (car, truck) and model-year group. The pool of available vehicles was drawn primarily from a sample of vehicle owners designed to represent the selected demographic and geographic characteristics of the Kansas City population. Emissions testing utilized a portable, light-duty chassis dynamometer with vehicles tested using the LA-92 driving cycle, on-board emissions measurement systems, and remote sensing devices. Particulate mass emissions were the focus of the study, with continuous and integrated samples collected. In addition, sample analyses included criteria gases (carbon monoxide, carbon dioxide, nitric oxide/nitrogen dioxide, hydrocarbons), air toxics (speciated volatile organic compounds), and PM constituents (elemental/organic carbon, metals, semi-volatile organic compounds). Results indicated that PM emissions from the in-use fleet varied by up to 3 orders of magnitude, with emissions generally increasing for older model-year vehicles. The study also identified a strong influence of ambient temperature on vehicle PM mass emissions, with rates increasing with decreasing temperatures.     

Kinetic analysis of the anaerobic digestion of untreated vinasses and vinasses previously treated with Penicillium decumbens

A kinetic study was carried out on the anaerobic digestion of untreated vinasses and vinasses previously fermented with Penicillium decumbens. Two 1-l volume continuous-flow stirred tank reactors (CFSTR) operating at mesophilic temperature (35 degrees C) were used for the study. One reactor was fed with untreated vinasses (COD concentration of 80.5 g/l) and the other with vinasses previously fermented (COD concentration of 23.0 g/l). Both reactors were operated at organic loading rates in the range of 1.5-7.5 g chemical oxygen demand (COD)/l-d. The results obtained were evaluated using the Chen-Hashimoto methane production model to determine the values of the maximum specific growth rate (micromax) and the model kinetic constant (K) of the process for each case studied. The kinetic constants (micromax and K) were affected by the pre-treatment, and the respective values were 9.6 and 6.9 times higher for pretreated vinasses than those of untreated vinasses. This was significant at the 95% confidence level. This behaviour is believed to be due to the lower levels of phenolic compounds present in the pretreated vinasses, as compared to untreated vinasses, resulting in an improved process performance, kinetics and stability. Finally, the experimental values of methane production were reproduced with deviations equal to or less than 4% and 10% for pretreated and untreated vinasses, respectively.     

Directions of Change in Land Cover and Landscape Patterns from 1957 to 2000 in Agricultural Landscapes in NW Spain

The aim of this work is the analysis of the dynamics in cultural landscapes, focused on the spatial distribution of changes in land cover and landscape patterns, and their possible linkages. These dynamics have been analyzed for the years 1957 and 2000 in a sector of the north of Galicia (NW Spain) characterized with diverse landscapes. Afforestation processes linked to agriculture abandonment and forestry specialization were the main processes observed in the study area, with the exception of the southern mountainous sector that was dominated by ploughing of scrubland for conversion into grassland, reflecting a specialization in livestock production. The structural changes that have taken place in most of the study area were related to the heterogeneity aspects, although the mountainous sectors were characterized by changes in heterogeneity and fragmentation. According to the tests performed, the comparison of the spatial distribution of both dynamics showed a certain statistical significance, reflecting the interrelationship between patterns and processes. This approach could be useful for the identification of areas with similar characteristics in terms of spatial dynamics so as to define more effective and targeted landscape planning and management strategies.     

A study of the natural biodegradation of two-phase olive mill solid waste during its storage in an evaporation pond

A study of the natural biodegradation of two-phase olive mill solid waste (OMSW) during its storage in an evaporation pond was carried out. This system is traditionally used as the final disposal of this waste or constitutes a previous stage before being processed by cogeneration or anaerobic digestion processes. A laboratory-scale pond with a total volume of 520 l was used. The experiment was carried out between December 2002 and August 2003 covering a total period of 269 days. During the experiment, the variations of temperature (outside and inside the pond), the effective volume of the OMSW in the pond, moisture content, total solids (TS), volatile solids (VS), the total chemical oxygen demand (TCOD), total volatile acids (TVA), pH and cumulative methane production as a function of the operation time were evaluated. The experimental results obtained showed that the characteristics of the two-phase OMSW in the pond were dependent on the time of operation and temperature. During the experiment, three periods were clearly observed and differentiated: (a) An initial period with a rapid reduction of moisture content and effective volume, with an increase of TS, VS and TCOD removals, a decrease of pH and an increase of TVA and methane production until day 21. (b) A second period of slow decrease of moisture content and effective volume, due to the decrease of the ambient temperature. This period took place between day 21 and days 120-150 of assay, and it was characterised by a slight change in the OMSW properties. (c) A third period where the characteristics of the waste in the pond changed considerably due to the increase of the temperature outside the pond. The methane gas production also showed an increase due to the increase of methanogenic activity with the increase of temperature. An empirical model to describe the changes of two-phase OMSW characteristics and methane production with the operation time was developed. The proposed model, based on the use of polynomial equations, took into account the influence of the temperature and fit adequately into the experimental results obtained. It was found that the pond could probably be used as preliminary treatment of two-phase OMSW before its anaerobic digestion process, because a maximum conversion of organic matter to TVA was obtained after an operation time of around 200 days.     

P2: Putting environmental issues in a new light

Pollution prevention can help you see environmental problems for what they really are: waste and inefficiency. © 2000 John Wiley & Sons, Inc.     

Does energy efficiency and trade openness matter for energy transition? Empirical evidence for countries in the Organization for Economic Co-operation and Development

Environment, Development and Sustainability - An energy transition is currently underway around the world, in response to the objectives laid out by international agreements. Since the Kyoto...     

Real-world vehicle emissions: a summary of the Sixteenth Coordinating Research Council On-Road Vehicle Emissions Workshop

The Coordinating Research Council held its 16th workshop in March 2006, with 83 presentations describing the most recent mobile source-related emissions research. In this paper, we summarize the presentations from researchers who are engaged in improving our understanding of the contribution of mobile sources to air quality. Participants in the workshop discussed evaluation of in-use emissions control programs, effects of fuels on emissions, emission models and emission inventories, results from gas- and particle-phase emissions studies from spark-ignition and diesel-powered vehicles, and efforts to improve our capabilities in performing on-board emissions measurements, as well as topics for future research.     

Records of polychlorinated biphenyls (PCBs) in sediments of four remote Chilean Andean Lakes

Sediment cores from four Chilean lakes along the Andes Chain (Chungará, Laja, Castor and Venus) were analysed in order to investigate PCB concentrations and distributions in sediment samples. Sediment cores were analysed for PCBs using gas chromatography (GC-ECD/MS) and radioisotopically dated using 210Pb. Organic carbon content (OC) and 210Pb fluxes were also measured. Results showed that sediment PCB concentrations (ngg(-1) d.w.) at Lake Chungará (1.2 +/- 1) in northern Chile, Laja (5 +/- 4) in central, and in Lake Castor (3.5 +/- 4) in southern Chile (the eastern side of the Andes Mountain) were lower than sediments collected from Lake Venus (64 +/- 30) located in southern Chile (the western side) which contained 15-fold higher concentrations of PCBs. The percentage (%) of organic carbon was variable and showed a high range of values in the sediment fluctuating from 2% (Lake Laja) to 22% (Lake Chungará). Analysis of 210Pb fluxes, presented a decrease trend following Lake Laja>Castor>Chungará with a positive correlation with rainfall at each site. Sedimentation rates in Lake Castor (1846 gm(-2)yr(-1)) were higher than at Chungará (748 gm(-2)yr(-1)) and Lake Laja (508 gm(-2)yr(-1)). Focusing factor (FF) is used as a tool to elucidate PCB input in the aquatic ecosystem. FF were lower (<1) for the shallower lakes (Lakes Chungará and Castor). This study provides background levels of PCBs at remote lakes in Chile. Differences in geographical characteristics (orographic effect) might play an important role in the arrival of PCBs, particularly into the southern lakes. PCB fluxes indicated deposition of PCBs in recent sediments is higher than in previous years with peaks of PCB between 1991 and 1998. The continuing increase of PCB inputs in remote Chilean lakes, could be associated with long range atmospheric transport (LRAT).     

Regression method of the hydrophobicity ruler approach for determining octanol/water partition coefficients of very hydrophobic compounds

A regression method was developed for the hydrophobicity ruler approach, which is an indirect method for determining the octanol/water partition coefficients of very hydrophobic compounds. Two constants introduced into the mathematical model were obtained by regression of the absorption data sampled before the partition equilibrium. A water miscible organic solvent was used to increase the solubility of the very hydrophobic compounds in the aqueous solution so that the hydrophobicity scale was reduced and the equilibration was accelerated. Polydimethylsiloxane/methanol aqueous solution and a series of 21 polychlorinated biphenyls (PCBs) were used to demonstrate the regression method. The PCB compounds with known experimental logK(o/w) values served as reference compounds, while the PCB compounds without known logK(o/w) values were determined. The distribution coefficients (logK(p/s)), uptake and elimination rate constants were obtained from the two regression constants for each compound (reference or unknown). The correlation of the logK(p/s) values of the reference PCB compounds with their logK(o/w) values was linear (logK(o/w)=2.69logK(p/s)+0.76, R(2)=0.97). The logK(o/w) values were compared with literature values and suggested that some values from the literature far off the calibration line could be inaccurate. The critical experimental factors, the merits of the regression method were discussed.