Source identification of inorganic airborne particle fraction (PM10) at ultratrace levels by means of INAA short irradiation

Many studies have focused their attention on the determination of elements of toxicological and environmental interest in atmospheric particulate matter using analytical techniques requiring chemical treatments. The instrumental nuclear activation analysis technique allows achieving high sensitivity, good precision, and excellent limit of detection without pretreatment, also considering the problems related to the radioisotope characteristics (e.g., half-life time, interfering reactions, spectral interferences). In this paper, elements such as Al, As, Br, Cl, Cu, I, La, Mg, Mn, Na, Sb, Si, Ti, and V are studied in atmospheric PM₁₀ sampled in downtown Rome: The relative radionuclides after activation of the sample are characterized by very short (ranging from 2.24 to 37.2 min) and short (ranging from 2.58 h to 2.70 days) half-lives. Furthermore, As, Br, La, Mn, and Sb were also determined for evaluating the aerosol characteristics. The results, elaborated considering the matrix effects and the interfering reaction contribution to the radioisotope formation (e.g., ²⁸Al generated by both (n,γ) reaction from ²⁷Al and (n,p) reaction from ²⁸Si), show interesting values of As (0.3–6.1 ng m^?3), Cu (22–313 ng m^?3), Mn (17–125 ng m^?3), V (7–63 ng m^?3), higher than those determined in an area not influenced by autovehicular traffic, and significant levels of I (1–11 ng m^?3) and Ti (25–659 ng m^?3) in Rome PM₁₀. The other elements show a pattern similar to the very few data present in the literature. It should be underlined the good correlation (r ²) of Al vs. Mg (0.915) and Al vs. La (0.726), indicating a same sources for these species as well as Br–Sb showing a little lower correlation (0.623). This last hypothesis is confirmed by the study of the enrichment factors: Sb and Br may be attributed to anthropogenic sources; Cu, Cl, and I show a mixed origin (natural and anthropogenic), whereas Al, Si, Ti, Mn, Na, Mg, and As are of crustal origin. For having more information, a statistical approach based on the principal component analysis and the canonical discriminant analysis has been performed: All the samples (except one) are grouped in a cluster, and elements such as As, Br, Cu, I, La, Mn, Sb, Ti, and V are highly correlated, whereas Na and Cl and Mg and Al assemble in two different clusters. Finally, a comparison with other similar studies is reported showing interesting values for Al, As, Mg, Mn, and Ti.     

Solar CPC pilot plant photocatalytic degradation of bisphenol A in waters and wastewaters using suspended and supported-TiO2. Influence of photogenerated species

Photocatalytic degradation of bisphenol A (BPA) in waters and wastewaters in the presence of titanium dioxide (TiO₂) was performed under different conditions. Suspensions of the TiO₂ were used to compare the degradation efficiency of BPA (20 mg L^?1) in batch and compound parabolic collector (CPC) reactors. A TiO₂ catalyst supported on glass spheres was prepared (sol–gel method) and used in a CPC solar pilot plant for the photodegradation of BPA (100 μg L^?1). The influence of OH·, O₂ ^·?, and h ⁺ on the BPA degradation were evaluated. The radicals OH· and O₂ ^·? were proved to be the main species involved on BPA photodegradation. Total organic carbon (TOC) and carboxylic acids were determined to evaluate the BPA mineralization during the photodegradation process. Some toxicological effects of BPA and its photoproducts on Eisenia andrei earthworms were evaluated. The results show that the optimal concentration of suspended TiO₂ to degrade BPA in batch or CPC reactors was 0.1 g L^?1. According to biological tests, the BPA LC₅₀ in 24 h for E. andrei was of 1.7?×?10^?2 mg cm^?2. The photocatalytic degradation of BPA mediated by TiO₂ supported on glass spheres suffered strong influence of the water matrix. On real municipal wastewater treatment plant (MWWTP) secondary effluent, 30 % of BPA remains in solution; nevertheless, the method has the enormous advantage since it eliminates the need of catalyst removal step, reducing the cost of treatment.     

Method of median semi-variance for the analysis of left-censored data: Comparison with other techniques using environmental data

In environmental monitoring, variables with analytically non-detected values are commonly encountered. For the statistical evaluation of these data, most of the methods that produce a less biased performance require specific computer programs. In this paper, a statistical method based on the median semi-variance (SemiV) is proposed to estimate the position and spread statistics in a dataset with single left-censoring. The performances of the SemiV method and 12 other statistical methods are evaluated using real and complete datasets. The performances of all the methods are influenced by the percentage of censored data. In general, the simple substitution and deletion methods showed biased performance, with exceptions for L/2, Inter and L/√2 methods that can be used with caution under specific conditions. In general, the SemiV method and other parametric methods showed similar performances and were less biased than other methods. The SemiV method is a simple and accurate procedure that can be used in the analysis of datasets with less than 50% of left-censored data.     

Does financial openness cause the intensification of environmental degradation? New evidence from Latin American and Caribbean countries

Environmental Economics and Policy Studies - The impact of financial openness on environmental degradation, mainly via carbon dioxide emissions, was investigated for a panel of 21 Latin American...     

Novel two-step vapor-phase synthesis of UV–Vis light active Fe2O3/WO3 nanocomposites for phenol degradation

Supported Fe₂O₃/WO₃ nanocomposites were fabricated by an original vapor phase approach, involving the chemical vapor deposition (CVD) of Fe₂O₃ on Ti sheets and the subsequent radio frequency (RF)-sputtering of WO₃. Particular attention was dedicated to the control of the W/Fe ratio, in order to tailor the composition of the resulting materials. The target systems were analyzed by the joint use of complementary techniques, that is, X-ray diffraction (XRD), field emission-scanning electron microscopy (FE-SEM), atomic force microscopy (AFM), energy dispersive X-ray spectroscopy (EDXS), X-ray photoelectron spectroscopy (XPS), secondary ion mass spectrometry (SIMS), and optical absorption spectroscopy. The results showed the uniform decoration of α-Fe₂O₃ (hematite) globular particles by tiny WO₃ aggregates, whose content could be controlled by modulations of the sole sputtering time. The photocatalytic degradation of phenol in the liquid phase was selected as a test reaction for a preliminary investigation of the system behavior in wastewater treatment applications. The system activity under both UV and Vis light illumination may open doors for further material optimization in view of real-world end-uses.

     

Mortality of the scleractinian coral <Emphasis Type="Italic">Cladocora caespitosa</Emphasis> during a warming event in the Levantine Sea (Cyprus)

A mortality event of Cladocora caespitosa corals and the extent of bleaching, necrosis and pigmented areas in the colonies were studied at the southeastern coast of Cyprus during a prolonged period of higher than average sea temperature anomalies (summer/autumn 2012). With the use of scuba diving and image analysis software, we monitored the extent of mortality of 29 colonies of C. caespitosa by measuring and comparing the area percentage of healthy tissue, affected tissue (bleached, necrotic) and older mortality events (encrusted skeleton). In September 2012, on average, 24 % of the colonies surface area was affected (bleaching and/or necrosis). In October 2012, C. caespitosa showed on average 26.3 % of the colony surface area affected, evidence of continuing deterioration. At the same time, 10 % (3 of 29) of the colonies showed an increase in the pigmentation of previously bleached polyps in small and marginal areas (6–8 %). Irrespective of the amount, the regaining of pigments recorded is considered an important find. Corals and marine organisms in general in the Levantine Sea are affected greatly by warming events, to the extent where a very small percentage of polyps/colonies show resilience under thermal stress. Natural bleaching of C. caespitosa, even though limited to a few colonies and very small portions of tissue/polyps, was documented for the first time in the Levantine Sea. We conclude that temperature anomalies are associated with the mortality event. Whether prolonged higher temperature is the direct cause, or whether it acts synergistically with other factors should be the subject of further investigations.     

Microalgae biosynthesis of silver nanoparticles for application in the control of agricultural pathogens

The occurrence of diseases in cultivars has caused significant losses in global food production. The advancement of nanobiotechnology makes it possible to obtain new products to be used in the control of pathogens in cultivars. Silver nanoparticles can be synthesized by microalgae and are widely known for their antimicrobial activity. In addition, the biomass produced in microalgal culture for the biosynthesis of the nanoparticles also demonstrates antimicrobial properties, as it can increase the antibacterial and antifungal potential of the silver nanoparticles. In this context, this article addresses the use of microalgae to biosynthesize silver nanoparticles simultaneously with biomass production. In addition, we demonstrate the antimicrobial potential of these nanomaterials, as well as of the microalgal biomass produced in biosynthesis, to use in the control of pathogens in agriculture.     

Ozone Predictions in Atlanta,Georgia: Analysis of the 1999 Ozone Season

ABSTRACT

Ozone prediction has become an important activity in many U.S. ozone nonattainment areas. In this study, we describe the ozone prediction program in the Atlanta metropolitan area and analyze the performance of this program during the 1999 ozone-forecasting season. From May to September, a team of 10 air quality regulators, meteorologists, and atmospheric scientists made a daily prediction of the next-day maximum 8-hr average ozone concentration. The daily forecast was made aided by two linear regression models, a 3-dimensional air quality model, and the no-skill ozone persistence model. The team's performance is compared with the numerical models using several numerical indicators. Our analysis indicated that (1) the team correctly predicted next-day peak ozone concentrations 84% of the time, (2) the two linear regression models had a better performance than a 3-dimensional air quality model, (3) persistence was a strong predictor of ozone concentrations with a performance of 78%, and (4) about half of the team's wrong predictions could be prevented with improved meteorological predictions.     

Performance of a Semi-Industrial Scale Gasification Process for the Destruction of Polychlorinated Biphenyls

Abstract

A semi-industrial scale test was conducted to thermally treat mixtures of spent oil and askarels at a concentration of 50,000 ppm and 100,000 ppm of polychlorinated biphenyls (PCBs) under a reductive atmosphere. In average, the dry-basis composition of the synthesis gas (syngas) obtained from the gasification process was: hydrogen 46%, CO 34%, CO₂ 18%, and CH₄ 0.8%. PCBs, polychlorinated dibenzo-p-dioxins, and polychlorinated dibenzofurans (PCDDs/PCDFs) in the gas stream were analyzed by high-resolution gas chromatography (GC)-mass spec-trometry. The coplanar PCBs congeners 77, 105, 118, 156/157, and 167 were detected in the syngas at concentrations <2 ×10^?7 mg/m³ (at 298 K, 1 atm, dry basis, 7% O₂). The chlorine released in the destruction of the PCBs was transformed to hydrogen chloride and separated from the gas by an alkaline wet scrubber. The concentration of PCBs in the water leaving the scrubber was below the detection limit of 0.002 mg/L, whereas the destruction and removal efficiency was >99.9999% for both tests conducted. The concentration of PCDDs/PCDFs in the syngas were 8.1 ×10^?6 ng-toxic equivalent (TEQ)/m³ and 7.1 × 10^?6 ng-TEQ/m³ (at 298 K, 1 atm, dry basis, 7% O₂) for the tests at 50,000 ppm and 100,000 ppm PCBs, respectively. The only PCDD/F congener detected in the gas was the octachloro-dibenzo-p-dioxin, which has a toxic equivalent factor of 0.001. The results obtained for other pollutants (e.g., metals and particulate matter) meet the maximum allowed emission limits according to Mexican, U.S., and European regulations for the thermal treatment of hazardous waste (excluding CO, which is a major component of the syngas, and total hydrocarbons, which mainly represent the presence of CH₄).     

Interspecies and spatial trends in polycyclic aromatic hydrocarbons (PAHs) in Atlantic and Mediterranean pelagic seabirds

PAHs were analyzed in the liver of 5 species of pelagic seabirds (Procellariiformes) from the northeast Atlantic and the Mediterranean. The main objective was to assess the trophic and geographic trends of PAHs in seabirds to evaluate their suitability as bioindicators of chronic marine pollution by these compounds. Although higher levels of PAHs have been described in the Mediterranean compared to other oceanic regions, we did not find significant spatial patterns and observed only minor effects of the geographic origin on seabird PAHs. However, we found significant higher PAH levels in petrel compared to shearwater species, which could be related to differences in their exploitation of mesopelagic and epipelagic resources, respectively, and the vertical dynamic of PAHs in the water column. Overall, although this study enhances the need of multi-species approaches to show a more comprehensive evaluation of marine pollution, seabirds emerged as poor indicators of pelagic chronic PAH levels.