Pyrimethanil residues on table grapes Italia after field treatment

Residues of the pyrimidine fungicide pyrimethanil [N-(4,6-dimethylpyrimidin-2yl)aniline] were determined in table grapes "Italia" by gas chromatography nitrogen-phosphorus detector (GC-NPD). Pesticides were extracted from grapes with ethyl acetate and hexane solution (1:1 v/v), and were analyzed without any further clean up. Pyrimethanil was confirmed by high-performance liquid chromatography (HPLC) fitted with a diode array detector (DAD) and electrospray ionization mass spectrometry (ESI-MS) in the select ion-monitoring mode (SIM). The residue of pyrimethanil was under the legal limit immediately after treatment, and showed a half-life time, calculated as a reaction of pseudo first order, of 12 days, with a regression coefficient of 0.9954. Recoveries from fortified grapes ranged between 90 and 113% with a maximum coefficient of variation (CV) of 11%. The calculated limits of detection and quantitation for pyrimethanil were 0.005 and 0.01 mg/kg, respectively.     

Ecodesign of automotive components making use of natural jute fiber composites

Nowadays, the world faces unprecedented challenges in social, environmental and economical dimensions, in which the industrial design has showed an important contribution with solutions that provide positive answers regarding these problems. In particular, due to its relevance, the automotive industry confronts a moment of crises, and based on the ecodesign of products it has been transforming the challenges in opportunities. In this context, the use of natural fiber composites, produced in developing countries, have presented several social, environmental and economical advantages to design “green” automotive components. Thus, this work through LCA method demonstrates the possibility to use natural fibers through a case study design which investigates the environmental improvements related to the replacement of glass fibers for natural jute fibers, to produce a structural frontal bonnet of an off-road vehicle (Buggy). Results pointed out the advantages of applying jute fiber composites in Buggy enclosures.     

The effect of ISO 14001 certification on toxic emissions: an analysis of industrial facilities in the north of Spain

During recent decades, the impact of industrial organisations on the environment has become clearly evident. It has also become more difficult to hide and more expensive. Globally, this has caused many enterprises to put all their efforts into seeking management instruments that allow them to reduce their negative impact on the environment as well as improving their economic efficiency. This environmental interest is either voluntary or forced by customers or by legal pressure. Environmental Management Systems (EMSs) are among the many tools that have appeared to fulfil that goal and that have drawn international researchers’ attention. The most popular system and the one most often used is the ISO 14001 standard.This paper examines empirically the influence that this certification exerts on the company’s pollutant emission policy. The analysis was carried out in four regions of Spain: Asturias, Cantabria, Galicia and Castilla-León and includes 126 industrial organisations. The goal of this paper is to investigate the behaviour of the companies according to their emissions policies once they have achieved the ISO 14001 certification. In the paper the Toxics Release Index of 56 certified companies is compared with the Index of 70 non-certified companies. Through a statistical analysis based on the Student’s t-test and the Mann–Whitney U test, it was concluded that ISO 14001 does not represent an environmental proactivity signal clearly enough to result in a reduction of the company’s environmental polluting index.     

Modelling feeding flow related shrinkage defects in aluminum castings

The process modelling of shape casting is geometrically complex and computationally very challenging. Besides the three-dimensional complex shapes with multiple domains, the defects of interest to industry arise as a consequence of the interaction amongst a range of phenomena. Conventionally, the key phenomena and defect prediction are modelled through empirical relations applied to the simulation results. Such approaches are neither comprehensive nor reliable. This paper presents a 3-D model that is capable of predicting the formation of shrinkage defects explicitly as a function of the interacting continuum phenomena, i.e. free surface flow, heat transfer, and solidification, in complex three-dimensional geometries which allows to identify the distinction between surface depression, surface connected cavities and internal cavities.The model solves the coupled macroscopic conservation equations for mass, momentum, and energy with a phase change during solidification. In the model, the volume deficit due to solidification can either be compensated by depression of the outside surface or by creating a cavity that initiates either on the surface or in the interior of the casting. The solidification morphology is taken into account by using a parameter, which depends on the fraction solid, in the momentum equation. By using an adapted free surface algorithm, it is suitable to predict surface connected defects: depressed surfaces and caved surfaces. A critical pressure serves as a criterion to open internal shrinkage cavities. The model does not need to search for connected zones to feed shrinkage, but the shrinkage distribution will automatically emerge from the continuity equation.This advanced shrinkage model has experimentally been validated successfully using two Al-Si alloys, a skin freezing eutectic alloy and a mushy freezing hypo-eutectic alloy.     

Electric load management in developing countries

Energy planners in developing countries have traditionally sought to meet their nations' growing electricity demands by adding more generation and transmission capacity. But as the foreign investment situation became critical in the 1980s, private investment and system efficiency improvement programmes began to garner interest. One of the most promising system efficiency improvement options is load management, which uses a variety of techniques to utilize the electricity system's existing capacity more efficiently. However, to date, only three countries have seriously considered implementing large load management programmes: Pakistan, Peru and Costa Rica. This paper describes a 1987-89 load control demonstration programme in Costa Rica, sponsored by the US Agency for International Development (AID), in which participating industries were able to reduce their peak demand by 14%.     

Energy conservation and CO2 emission reductions due to recycling in Brazil

The present paper aims to make the energy saving potential provided by waste recycling in Brazil evident by pointing out more specifically the benefits regarding climate change mitigation. In this case, based on the energy saved due to the recycling process of an exogenous amount of waste, we have built two scenarios in order to show the potential for indirectly avoiding CO2 emissions in the country as a result of the recycling process. According to the scenario, 1 Mt and 3.5 Mt of CO2, respectively, would be avoided per year due to solid waste recycling. The international context for greenhouse gas emissions reduction, such as the United Nations Framework Convention on Climate Change and its Kyoto Protocol has been taken into account.     

Hg transfer from contaminated soils to plants and animals

Understanding the transfer of mercury (Hg) from soil to crops is crucial due to Hg toxicity and Hg occurrence in terrestrial systems. Previous research has shown that available Hg in soils contributes to plant Hg levels. Plant Hg concentrations are related to soil conditions and plant characteristics. Mechanistic models describing such soil–plant interactions are however difficult to quantify. Here we performed a field study in agricultural, mining and industrial areas in Portugal to evaluate potential food chain risks. The uptake of Hg by Italian ryegrass, ryegrass, orchard grass, collard greens and rye was measured to calculate daily intakes (DI) of Hg for cows and sheep grazing. A total of 136 soil samples and 129 plant samples were analysed. Results show that total Hg concentrations ranged from 0.01 to 98 mg kg⁻¹ in soils; 0.01–5.4 mg kg⁻¹ in shoots and 0.01–42 mg kg⁻¹ in roots. Calculated DI ranged from 0.18 to 132 mg d⁻¹ for cows, and from 0.028 to 23 mg d⁻¹ for sheep. In 27 grassland sites, daily intakes exceeded the acceptable daily intake of both cows and sheep in view of food safety considering Hg in animal kidneys evidencing potential risks to human health. The transfer of Hg from soil to crops was described using empirical Freundlich-type functions. For ryegrass, orchard grass and collard greens, the soil-to-root or soil-to-shoot transfer of Hg appeared to be controlled by the total soil Hg concentration and levels of Al_ox and Fe_ox. Empirical functions allowed us to obtain realistic estimates of Hg levels in crops and can be used as an alternative to mechanistic models when evaluating food chain risks of Hg contamination in agricultural soils.