Review of fly ash inertisation treatments and recycling

Fly ash (FA) is a by-product of power, and incineration plants operated either on coal and biomass, or on municipal solid waste. FA can be divided into coal fly ash, obtained from power plant burning coal, flue gas desulphurisation FA, that is, the by-product generated by the air pollution control equipment in coal-fired power plants to reduce the release of SO₂, biomass FA produced in the plants for thermal conversion of biomass and municipal solid waste incineration (MSWI) FA, that is, the finest residue obtained from the scrubber system in a MSWI plant. Because of the large amount produced in the world, fly ash is now considered the world’s fifth largest material resource. The composition of FA is very variable, depending on its origins; then, also pollutants can be very different. In this frame, it is fundamental to exploit the chemical or physical potentials of FA constituents, thus rendering them second-life functionality. This review paper is addressed to FA typology, composition, treatment, recycling, functional reuse and metal and organic pollutants abatement. Because of the general growing of environmental awareness and increasing energy and material demand, it is expected that increasing recycling rates will reduce the pressure on demand for primary raw materials, help to reuse valuable materials which would otherwise be wasted and reduce energy consumption and greenhouse gas emissions from extraction and processing.     

Reconsidering the Dynamic Interaction of Renewable Resources and Population Growth: A Focus on Long-Run Sustainability

Within the framework of a general equilibrium model we study the long-run dynamics of resources and population if the growth rate of resources and population and the share of labor devoted to production are adversely affected by resource scarcity. Our results show that sustainability, i.e. a positive value of resources and population in the long run, essentially depends on the level of per capita resources at which these feedback mechanisms become active. A detailed bifurcation analysis evidences the richness of possible long-run dynamics.     

Coyotes,deer, and wildflowers: diverse evidence points to a trophic cascade

Spatial gradients in human activity, coyote activity, deer activity, and deer herbivory provide an unusual type of evidence for a trophic cascade. Activity of coyotes, which eat young mule deer (fawns), decreased with proximity to a remote biological field station, indicating that these predators avoided an area of high human activity. In contrast, activity of adult female deer (does) and intensity of herbivory on palatable plant species both increased with proximity to the station and were positively correlated with each other. The gradient in deer activity was not explained by availabilities of preferred habitats or plant species because these did not vary with distance from the station. Does spent less time feeding when they encountered coyote urine next to a feed block, indicating that increased vigilance may contribute, along with avoidance of areas with coyotes, to lower herbivory away from the station. Judging from two palatable wildflower species whose seed crop and seedling recruitment were greatly reduced near the field station, the coyote–deer–wildflower trophic cascade has the potential to influence plant community composition. Our study illustrates the value of a case-history approach, in which different forms of ecological data about a single system are used to develop conceptual models of complex ecological phenomena. Such an iterative model-building process is a common, but underappreciated, way of understanding how ecological systems work.     

A comparison of DEMETRA individual QSARs with an index for evaluation of uncertainty

Quantitative structure-activity relationships (QSARs) urgently need to be applied in regulatory programs. Many QSAR models can predict the effect of a wide range of substances to different endpoints, particularly in the case of ecotoxicity, but it is difficult to choose the most appropriate model on the basis of the requirements of the application. During the EC-funded project DEMETRA (www.demetra-tox.net) a huge number of QSAR models have been developed for the prediction of different ecotoxicological endpoints. DEMETRA individual models on rainbow trout LC50 after 96 h, water flea LC50 after 48 h and honey bee LD50 after 48 h have been used as a QSAR database to test the advantages of a new index for evaluating model uncertainty. This index takes into consideration the number of outliers (weighted on the total number of compounds) and their root mean square error. Application on the DEMETRA QSAR database indicated that the index can identify the models with the best performance with regard to outliers, and can be used, together with other classical statistical measures (e.g., the squared correlation coefficient), to support the evaluation of QSAR models.     

Integration of biological responses from a suite of bioassays for the Venice Lagoon (Italy) through sediment toxicity index - Part A: Development and comparison of two methodological approaches

Marine and coastal quality assessment, based on test batteries involving a wide array of endpoints, organisms and test matrices, needs for setting up toxicity indices that integrate multiple toxicological measures for decision-making processes and that classify the continuous toxicity response into discrete categories according to the European Water Framework Directive.Two toxicity indices were developed for the lagoon environment such as the Venice Lagoon. Stepwise procedure included: the construction of a database that identified test-matrix pairs (indicators); the selection of a minimum number of ecotoxicological indicators, called toxicological core metrics (CMs-tox) on the basis of specific criteria; the development of toxicity scores for each CM-tox; the integration of the CMs-tox into two indices, the Toxicity Effect Index (TEI), based on the transformation of Toxic Unit (TU) data that were integrated as logarithmic sum, and the Weighted Average Toxicity Index (WATI), starting from toxicity classes integrated as weighted mean. Results from the indices are compared; advantages and drawbacks of both approaches are discussed.     

Current status and perspectives of accelerated carbonation processes on municipal waste combustion residues

The increasing volumes of municipal solid waste produced worldwide are encouraging the development of processes to reduce the environmental impact of this waste stream. Combustion technology can facilitate volume reduction of up to 90%, with the inorganic contaminants being captured in furnace bottom ash, and fly ash/APC residues. The disposal or reuse of these residues is however governed by the potential release of constituent contaminants into the environment. Accelerated carbonation has been shown to have a potential for improving the chemical stability and leaching behaviour of both bottom ash and fly ash/APC residues. However, the efficacy of carbonation depends on whether the method of gas application is direct or indirect. Also important are the mineralogy, chemistry and physical properties of the fresh ash, the carbonation reaction conditions such as temperature, contact time, CO₂ partial pressure and relative humidity. This paper reviews the main issues pertaining to the application of accelerated carbonation to municipal waste combustion residues to elucidate the potential benefits on the stabilization of such residues and for reducing CO₂ emissions. In particular, the modification of ash properties that occur upon carbonation and the CO₂ sequestration potential possible under different conditions are discussed. Although accelerated carbonation is a developing technology, it could be introduced in new incinerator facilities as a “finishing step” for both ash treatment and reduction of CO₂ emissions.     

Variability of Water Column Transparency,Volume Flow and Suspended Solids Near San Diego Sewage Outfall (California): 15 Years of Data

The spatial and temporal variability of transparency measured for 15 years at 7 stations near the San Diego sewage outfall has been investigated and compared to the temporal variability of sewage suspended solid discharge and flow rate. the purpose of the time-series analyses was to distinguish natural from human (sewage discharge) causes of temporal changes in transparency. the results show that: 1) variations in transparency are highly correlated over the entire area, but there is a gradient in means and variability in the direction perpendicular to the coast; 2) there are no long term trends for increase or decrease in the water clarity at any of the stations; 3) most of the variance of transparency is contained in the seasonal frequency band; 4) over the same time period sewage discharge has significantly increased and suspended solids decreased; 5) most of the variance of these human-caused properties is in the interannual frequency band; (6) there is no correlation at any time-lag between water clarity and suspended solid discharge or flow. These results lead to the conclusion that these anthropogenic properties are not affecting transparency, while natural factors such as seasonality and distance from coast do.     

Azo-dyes photocatalytic degradation in aqueous suspension of TiO2 under solar irradiation

The photodegradation of two common and very stable azo-dyes, i.e. methyl-orange (C₁₄H₁₄N₃SO₃Na) and orange II (C₁₆H₁₁N₂SO₄Na), is reported. The photocatalytic oxidation was carried out in aqueous suspensions of polycrystalline TiO₂ irradiated by sunlight. Compound parabolic collectors, installed at the “Plataforma Solar de Almería” (PSA, Spain) were used as the photoreactors and two identical reacting systems allowed to perform photoreactivity runs for the two dyes at the same time and under the same irradiation conditions. The disappearance of colour and substrates together with the abatement of total organic carbon content was monitored. The main sulfonate-containing intermediates were found to be in lower number in respect to those obtained under artificial irradiation. In particular there were no more evidence of the presence of hydroxylated transients. The dependence of dye photooxidation rate on: (i) substrate concentration; (ii) catalyst amount; and (iii) initial pH was investigated. The influence of the presence of strong oxidant species (H₂O₂, S₂O₈²⁻) and some ions (Cl⁻, SO₄²⁻) on the process was also studied.     

Bisphenol A endocrine disruptor complete degradation using TiO2 photocatalysis with ozone

Bisphenol A is an endocrine disruptor. Complete mineralization of bisphenol A is therefore a primary environmental issue. Here, the combination of ozonation and photocatalysis by TiO₂ is proposed for the degradation and final mineralization of bisphenol A. TiO₂ films deposited onto two sides of an Al lamina show good stability and high surface roughness. We used a specific experimental setup employing two facing ultraviolet lamps and TiO₂ layers, together with an ozone flux. High-performance liquid chromatography–mass spectrometry determinations on bisphenol A solutions sampled at different reaction times and Fourier Transform Infrared analyses of the oxide at the end of the reaction were performed to study the reaction intermediates and the overall degradation mechanism. Our results show that pollutant mineralization achieved with the combined method is far higher, of 55% in the case of 0.3 mM bisphenol A, than those obtained by individual treatments such as photolysis (<3%), ozonation (6%), photocatalysis (6%), and by other combined processes: photolytic ozonation (13%) and catalytic ozonation (15%). This finding is explained by the occurrence of highly synergistic effects.