Organochlorine residues in harbour porpoises from Southwest Greenland

During the 1995 hunting season, 75 harbour porpoises (Phocoena phocoena) were sampled in three locations in West Greenland: Maniitsoq, Nuuk, and Paamiut. Sex, age, morphometrics, reproductive condition, and organochlorine compound (OC) levels in blubber were determined for each individual. OC levels were extremely low and, therefore considered unlikely to affect the population adversely: mean blubber concentrations, expressed on lipid weight basis were 1.98 (S.D.=1.1) mg/kg for PCBs, 2.76 (S.D.=1.66) mg/kg for tDDT and 0.21 (S.D.=0.11) mg/kg for HCB. No statistical differences were observed among individuals caught in the various locations. OC concentrations showed statistically significant positive associations with age in males but negative in females; consequently, mature females presented lower pollutant loads than their male counterparts. Juveniles did not show differences between sexes. A higher proportion of less chlorinated and more metabolizable polychlorinated biphenyls (PCBs) compared to tPCBs was found in calves (age< or =1) than in mature females, indicating that the feeding habits of these two groups differ and that a greater transfer of less chlorinated compounds is passed from females to their pups through lactation and parturition. Harbour porpoises significantly contribute to the dietary intake of OCs by local Inuit populations. This contribution could be reduced if mature males were selectively avoided; however, current hunting procedures make this selection impracticable.     

Analyzing Human–Landscape Interactions: Tools That Integrate

Humans have transformed much of Earth’s land surface, giving rise to loss of biodiversity, climate change, and a host of other environmental issues that are affecting human and biophysical systems in unexpected ways. To confront these problems, environmental managers must consider human and landscape systems in integrated ways. This means making use of data obtained from a broad range of methods (e.g., sensors, surveys), while taking into account new findings from the social and biophysical science literatures. New integrative methods (including data fusion, simulation modeling, and participatory approaches) have emerged in recent years to address these challenges, and to allow analysts to provide information that links qualitative and quantitative elements for policymakers. This paper brings attention to these emergent tools while providing an overview of the tools currently in use for analysis of human–landscape interactions. Analysts are now faced with a staggering array of approaches in the human–landscape literature—in an attempt to bring increased clarity to the field, we identify the relative strengths of each tool, and provide guidance to analysts on the areas to which each tool is best applied. We discuss four broad categories of tools: statistical methods (including survival analysis, multi-level modeling, and Bayesian approaches), GIS and spatial analysis methods, simulation approaches (including cellular automata, agent-based modeling, and participatory modeling), and mixed-method techniques (such as alternative futures modeling and integrated assessment). For each tool, we offer an example from the literature of its application in human–landscape research. Among these tools, participatory approaches are gaining prominence for analysts to make the broadest possible array of information available to researchers, environmental managers, and policymakers. Further development of new approaches of data fusion and integration across sites or disciplines pose an important challenge for future work in integrating human and landscape components.     

Eigenbehaviors: identifying structure in routine

Longitudinal behavioral data generally contains a significant amount of structure. In this work, we identify the structure inherent in daily behavior with models that can accurately analyze, predict, and cluster multimodal data from individuals and communities within the social network of a population. We represent this behavioral structure by the principal components of the complete behavioral dataset, a set of characteristic vectors we have termed eigenbehaviors. In our model, an individual’s behavior over a specific day can be approximated by a weighted sum of his or her primary eigenbehaviors. When these weights are calculated halfway through a day, they can be used to predict the day’s remaining behaviors with 79% accuracy for our test subjects. Additionally, we demonstrate the potential for this dimensionality reduction technique to infer community affiliations within the subjects’ social network by clustering individuals into a “behavior space” spanned by a set of their aggregate eigenbehaviors. These behavior spaces make it possible to determine the behavioral similarity between both individuals and groups, enabling 96% classification accuracy of community affiliations within the population-level social network. Additionally, the distance between individuals in the behavior space can be used as an estimate for relational ties such as friendship, suggesting strong behavioral homophily amongst the subjects. This approach capitalizes on the large amount of rich data previously captured during the Reality Mining study from mobile phones continuously logging location, proximate phones, and communication of 100 subjects at MIT over the course of 9 months. As wearable sensors continue to generate these types of rich, longitudinal datasets, dimensionality reduction techniques such as eigenbehaviors will play an increasingly important role in behavioral research. This contribution is part of the special issue “Social Networks: new perspectives” (Guest Editors: J. Krause, D. Lusseau and R. James). An erratum to this article can be found at     

Copulatory behavior in a pholcid spider: males use specialized genitalic movements for sperm removal and copulatory courtship

Sexual selection may operate on pre-copulatory, copulatory, and post-copulatory traits. An example of a copulatory target of sexual selection is the genitalic movements a male performs during copulation. These movements may function either to prevent sperm competition or to influence a female’s fertilization decision. Here we investigated how copulation duration, pedipalp movements, and abdominal movements that males of the pholcid spider Holocnemus pluchei produce during copulation influence sperm removal and/or patterns of successful sperm transfer. We compared mating events with virgin and mated females for differences in copulatory and post-copulatory behavior. We expected longer copulation duration, longer pedipalp movement duration, and more complex and frequent pedipalp and abdominal movements when males mated with mated females compared to virgin females. Except for abdominal movements, our results corroborated these predictions. Furthermore, when we investigated mating events with mated females, we observed sperm mass ejection from the female gonopore and physical removal of sperm by males’ procursi. Females with interrupted second mating events showed a significant reduction of stored sperm masses compared to females with completed mating events. We suggest that males use alternating pedipalp movements to remove most of the rival sperm stored by mated females prior to sperm transfer. Copulation duration and pedipalp movements can be further used to transfer sperm and/or as a form of genitalic copulatory courtship.     

Effects of three biochars on copper immobilization and soil microbial communities in a metal-contaminated soil using a metallophyte and two agricultural plants

Environmental Geochemistry and Health - Biochar (BC) is a porous, carbonaceous material produced by slow pyrolysis of biomass under oxygen-limited conditions. BC production has been attracting...     

Aerosol organic nitrogen over the remote Atlantic Ocean

Water soluble organic nitrogen (WSON) has been measured in aerosols collected on three research cruises on the Atlantic Ocean from approximately 55°N to 45°S. Results are interpreted using air mass back trajectories and results for other aerosol components. WSON concentrations range from <1 to ～40 (median 5.6) nmol m^?3 with significant WSON concentrations in both fine (<1 μm) and coarse mode (>1 μm) aerosol. Concentrations of WSON were highest in samples containing Saharan dust, suggesting a locally significant source associated with soil dust. More generally WSON concentrations were highest in air which had recently crossed continental areas. In the whole data set, WSON is well correlated to total soluble nitrogen and represents approximately 25% of total nitrogen. This correlation implies a significant anthropogenic contribution to the organic nitrogen.     

Accounting for Cadmium: Tracking Emissions of Cadmium From the Global Economy

This paper examines the flow of cadmium through the global economy, with the aim of quantifying emissions of cadmium into the environment as a result of anthropogenic activities. First, a materials balance methodology is presented as the most appropriate means of assessing cadmium emissions from a wide range of anthropogenic sources. This is then applied to the best available data, from a variety of sources, to arrive at estimated flows of cadmium. Results are presented for 10 geo-political world regions and for a range of economic activities including non-ferrous metals production, iron and steel production, combustion of fossil fuels, fertilizer manufacture and use, cement production and the manufacture, use and disposal of cadmium containing products. Initially, this analysis partitions the total flow of cadmium into three major categories: atmospheric emissions, water-borne effluents and solid or bulked waste arisings. the paper then suggests a probable further partition of the initial emissions into different environmental media.     

Community partnered projects: a case study of a collaborative effort to improve sanitation in a marginalized community in northwest Mexico

There is a growing recognition in developing countries that community participation in water and sanitation projects is a necessary strategy in sustainable development. The main advantage of following such an approach is that, if participation can encourage a sense of ownership of the projects, the benefits of the project are more likely to extend over the long term. The case study at hand focuses on the challenges faced in implementing a wastewater treatment system to solve an environmental and public health problem in a rural community, Rosario de Tesopaco, in northwest Mexico. Until recently, the community has been unable to implement an effective plan to treat the wastewater generated in the community. The problems faced by the community can be attributed to the political arrangement of water and sanitation decentralization in Mexico that occurred in the mid 1980’s, whereby communities were required to meet wastewater treatment standards, but were not given the technical and political guidance needed to achieve this goal. However, in this instance, cooperation between the authorities in Rosario de Tesopaco, the federal agency for social development, and an academic institution has led to the successful design and approval of a wastewater treatment project. This achievement can be attributed to the use of an effective collaborative strategy, tailoring the project to the needs and capacity of the local community, positioning the community as the leaders and owners of the project. A model for following this strategy for developing rural sanitation projects in Mexico is proposed. Readers should send their comments on this paper to BhaskarNath@aol.com within 3 months of publication of this issue.     

The effects of surfactant formulation on nonequilibrium NAPL solubilization

Surfactant-enhanced aquifer remediation (SEAR) involves the injection of surfactant solutions into aquifers contaminated with nonaqueous phase liquids (NAPL). Batch and column experiments were used to assess the effect of surfactant formulation on the rate of NAPL solubilization. The experimental variables were surfactant type, surfactant concentration, electrolyte concentration, and cosolvent concentration. Model equations were proposed and solved to describe solubilization under the conditions of each type of experiment. Using these models, a solubilization rate constant, kappa(b), and an overall mass transfer rate coefficient, kappa, were estimated from the batch and column experiments, respectively. The solubilization rate constant was consistently sensitive to surfactant type, surfactant concentration, and electrolyte concentration. The estimated solubilization rate constants varied over two orders of magnitude. The results of the column experiments also were sensitive to the surfactant formulation. Variations in the fitted mass transfer rate coefficient parameter, beta(0), were related to variations in the surfactant formulations. A comparison between the results of the batch and column experiments yields an apparent relationship between beta(0) and kappa(b). This relationship suggests that the mass transfer rate coefficient is directly related to the formulation of the surfactant solution.     

Reforming the CDM for sustainable development: lessons learned and policy futures

The Clean Development Mechanism (CDM) has successfully demonstrated that market-based mechanisms can achieve some cost effective emissions reductions in developing countries. However the distribution of CDM projects has been extremely uneven across countries and regions, and a few technologies and sectors have dominated the early stages of CDM experience. This has caused some to question whether the CDM has fallen short of its potential in contributing to sustainable development. We review the broad patterns of CDM project approvals and evaluate 10 CDM projects according to their sustainability benefits. The difficulty of defining “sustainable development” and the process of defining criteria by individual non-Annex 1 governments has meant that sustainable development concerns have been marginalized in some countries. Given these observed limitations, we present possible CDM policy futures, focusing on the main proposals for a post-2012 climate regime. Five options for enhancing the sustainable development benefits in the CDM are discussed, including proactive approaches to favour eligibility of emission reduction projects which ensure such co-benefits.