A reproducible approach to the reporting of organochlorine compounds in epidemiologic studies

A growing body of research indicates that the most biologically active PCB congeners and organochlorines are not the most abundant components in human and wildlife samples. As researchers attempt measurement on a wider pool of less abundant compounds, they inevitably face quantification problems. To address this problem and enhance comparability across studies, we propose a standardized approach to report organochlorines that is based on a reproducible method to determine the limit of quantification (LQ). Two statistical methods are incorporated into our approach, one by Gibbons termed the Alternative Minimum Level (AML), and one based on determining a region of stable relativestandard deviation in instrument response (RSD). We illustrate our approach using historical samples collected during the 1960s from a cohort of pregnant women enrolled in the Child Health and Development Study. The results are applicable to determining the LQ of any method, and are of utmost importance to environmental scientists conducting trace organic analyses of complex mixtures. Our results demonstrate that: (1) precision as measured by RSD is the most important criterion in determining LQ; (2) the AML routinely isolates a region of constant RSD; and (3) the precision of the instrument detector response as measured with pure standards locates the LQ applicable for real samples - that is, the true limits of quantification reside in the detector, not the matrix effects or analyte recoveries associated with real samples. A corollary of these findings is that bias due to matrix effects and analyte recoveries can be assessed separately from precision and LQdetermination. Previous approaches involved spiking matrix blanks to determine LQ, a problematic strategy for real world, complex matrices. We have now validated the use of pure standards in LQ determination, an approach that is practical and accessible to most analysts.     

Atmospheric deposition of polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans, and dioxin-like polychlorinated biphenyls in the Kanto Region, Japan

The atmospheric bulk (dry and wet) deposition of dioxins was investigated at four locations (Tokyo, Yokohama, Tsukuba, and Tanzawa) in the Kanto region (in Japan) over one year using a stainless-steel pot. Annual average polychlorinated dibenzo-p-dioxins/polychlorinated dibenzofurans (PCDD/PCDF) deposition fluxes were estimated to be from 450 to 1300 ng/m2/yr, and the annual average TEQ fluxes from 5.7 to 17 ng-TEQ/m2/yr at the four locations. The PCDD/PCDF deposition flux was higher in winter than in summer. The deposition flux could be related to ambient temperature, particularly for less chlorinated PCDDs/PCDFs, while the deposition flux is not necessarily related to the amount of precipitation. The PCDD/PCDF deposition flux increased as the particle deposition flux increased, for the winter samples. Based on the ratio of the PCDD/PCDF deposition fluxes to the particle deposition fluxes, the contribution of the reentrainment of soil particles to the TEQ of PCDD/PCDF deposition was considered to be negligible in this region. Based on the air concentrations monitored near our deposition sampling points by the municipalities, the ratio of the annual deposition flux to the annual average air concentration was roughly estimated to be 0.082 cm/s. The range of deposition flux in the Kanto region was estimated to be from 1.5 to 31 (median: 9.8) ng-TEQ/m2/yr based on the range of air concentration data measured by the municipalities. The total annual deposition flux in the entire Kanto region was estimated to range from 50 to 900 g-TEQ/yr (median 320 g-TEQ/yr). This estimated flux was of the same order as the sum of estimated emissions from municipal solid waste incinerators and industrial waste incinerators in the Kanto region. The contributions of dioxin-like PCBs in Yokohama, Tsukuba, and Tanzawa depositions were less than 10% of the total TEQ; however, in Tokyo it was almost equal to or more than 50%.     

Non-aqueous-phase-liquid breakthrough during evaporative drying of clay barriers

In this study, an attempt has been made to model a real field scenario, whereby an initially almost saturated clay liner in a waste site is gradually drying, due to evaporation at its lower boundary. A detailed conceptual model that deals with the penetration and breakthrough of non-aqueous-phase-liquid (NAPL) in clay liners is introduced. Water content of clay samples was monitored during ambient evaporation through apertures at the base of sample holders. Clay drying rate served as the primary parameter for the NAPL breakthrough study. The interconnection between drying rates, structural damage formation (cracks and suction) and NAPL penetration is especially addressed. The processes taking place in the clay samples during drying appear to be associated with the capillary effects between the different fluid phases in the vicinity of either the NAPL-clay or the clay-air boundaries. A conceptual model of NAPL penetration and breakthrough of the clay layer has been considered, based on both indirect and direct observations of structural damages produced on either clay boundaries. A mutual interaction between these two boundaries is suggested and discussed. NAPL breakthrough is suggested to take place through cracks initiated on the upper soil surface.