Structure and function of the third maxillipeds of the banana prawn Penaeus merguiensis

The functions of the third maxilliped of Penaeus merguiensis de Man are described. It has a 6-segmented endopodite which is used in feeding, grooming and possible pheromone reception. In feeding, large pieces of food are gripped by the stout spines on inner borders of the ischia which hold them to the mouth so that particles can be torn off and ingested. All the distal segments have long setae used in grooming chelate pereiopods and the antennules. In mature males there is a tuft of about 300 slender setae at the end of the propus, but its function remains obscure.     

Two-dimensional distribution of microbial activity and flow patterns within naturally fractured chalk

The two-dimensional distribution of flow patterns and their dynamic change due to microbial activity were investigated in naturally fractured chalk cores. Long-term biodegradation experiments were conducted in two cores ( approximately 20 cm diameter, 31 and 44 cm long), intersected by a natural fracture. 2,4,6-tribromophenol (TBP) was used as a model contaminant and as the sole carbon source for aerobic microbial activity. The transmissivity of the fractures was continuously reduced due to biomass accumulation in the fracture concurrent with TBP biodegradation. From multi-tracer experiments conducted prior to and following the microbial activity, it was found that biomass accumulation causes redistribution of the preferential flow channels. Zones of slow flow near the fracture inlet were clogged, thus further diverting the flow through zones of fast flow, which were also partially clogged. Quantitative evaluation of biodegradation and bacterial counts supported the results of the multi-tracer tests, indicating that most of the bacterial activity occurs close to the inlet. The changing flow patterns, which control the nutrient supply, resulted in variations in the concentrations of the chemical constituents (TBP, bromide and oxygen), used as indicators of biodegradation.     

Butanol extraction to predict bioavailability of PAHs in soil

The feasibility of a mild-solvent extraction procedure to predict the bioavailability of individual polycyclic aromatic hydrocarbons (PAHs) in soil was assessed. The quantities that were degraded during the course of biodegradation of phenanthrene and pyrene in soil with or without plants correlated with the amounts extracted by n-butanol, with R2 values of 0.971 and 0.994, respectively. Six consecutive groups of earthworms removed ca. 70% of the pyrene remaining after extensive biodegradation, a value similar to the quantity extracted by n-butanol. The amount of chrysene aged in sterilized soil that was extracted by n-butanol was not statistically different from the quantities assimilated by earth-worms (Eisenia fetida) introduced into the soil. Such a mild extraction procedure may be useful as a means of predicting PAH bioavailability.     

Evaluation of alternative oil spill cleanup techniques in a Spartina alterniflora salt marsh

Three oil spill situations which cause long-term impact were simulated in 1 m(2) salt marsh plots to evaluate the effectiveness of alternative cleanup techniques at removing oil and reducing damage to Spartina alterniflora. Cleanup techniques, implemented 18-24 h after oiling, were not effective at removing oil after sediment penetration. When oil remained on the sediment surface, flushing techniques were most effective at removal, reducing levels of added oil by 73% to 83%. The addition of dispersant to the flushing stream only slightly enhanced oil removal. Clipping of vegetation followed by sorbent pad application to sediment was moderately effective, reducing added oil by 36% to 44%. In contrast to flushing and clipping, burning increased the amount of oil in sediment by 27% to 72%. Although flushing and clipping were effective at oil removal, neither technique reduced initial damage to plants or enhanced long-term recovery. While flushed plots sustained no additional plant damage due to cleanup, clipped and burned plots sustained additional initial plant damage. Based on these results, first considerations should be given to natural tidal flushing as the means to remove oil, especially in salt marshes subject to ample tidal inundation. Although our results do not support cleanup in salt marshes with ample tidal inundation, low pressure flushing may be warranted when fuel oils or large quantities of crude oil impact salt marshes subject to reduced tidal flushing. Flushing, when warranted, should be initiated prior to oil penetration into the substrate. Clipping may be considered as a cleanup response only when heavy oil cannot be effectively removed from vegetation by flushing. Burning is not recommended because it enhances oil penetration into sediment and causes substantial initial plant damage.     

Chemical assays of availability to earthworms of polycyclic aromatic hydrocarbons in soil

The bioavailable concentration of an organic pollutant is less than the concentration determined by vigorous extraction of soil. Because bioavailability varies with the particular compound, soil, and aging time, an assay for bioavailability is needed. Three methods were tested: extraction with a 25% aqueous solution of tetrahydrofuran (THF), 95% ethanol, and C18 membranes. Evaluations were conducted with a mixture of four polycyclic aromatic hydrocarbons (PAHs) added to five dissimilar soils and with pyrene as sole PAH added to six soils, and the availability of aged and freshly added compounds was determined. Assimilation by earthworms (Eisenia fetida) was used to assess bioavailability. For extraction with THF and earthworm uptake, the correlation coefficients of determination (R2) for anthracene, chrysene, pyrene, and benzo(a)pyrene added as a mixture exceeded 0.85. The R2 values for assays with the C18 membrane were 0.77 or higher. The values for pyrene added alone were 0.710 and 0.823, respectively. R2 values for assays with ethanol often exceeded 0.87, but lower values were sometimes obtained. We suggest that such solvent or solid-phase extractions may be useful in assessing PAH bioavailability.     

The heterogeneous composition of working place aerosols in a nickel refinery: a transmission and scanning electron microscope study

Size, morphology and chemical composition of individual aerosol particles collected in a nickel refinery were analyzed by scanning electron microscopy and energy-dispersive X-ray microanalysis (EDX). The phase composition was determined by selected area electron diffraction and EDX in a transmission electron microscope. Most particles are heterogeneous on a nanometer scale and consist of various phases. Nickel phases observed in the roasting and anode casting departments include metallic nickel, bunsenite (NiO), trevorite (Ni,Cu)Fe2O4, heazlewoodite Ni3S2, godlevskite (Ni,Cu)9S8, orthorhombic NiSO4 and an amorphous Ni,Cu.Al,Pb sulfate of variable composition. Additional phases encountered include corundum (Al2O3), murdochite (PbCu6O8), hexagonal Na2SO4, anhydrite (CaSO4), graphite (C) and amorphous carbon. The implications of the occurrence of the different Ni phases and their nanometer size for the study of adverse health effects are explored.     

Air pollution in Athens basin and health risk assessment

An inventory of air pollution sources within the Athens basin is carried out for the years 1989, 1992 and 1998 and the results areinputted in a climatological model for predicting ambient concentrations. Despite of the significant growth in the numberof road vehicles and the deteriorating traffic, the emissions andambient concentrations of fine particulates, CO, NO_x and VOCappear to remain reasonably constant over for the period 1989 to 1998, while these of SO₂ and Pb are reduced, mainly due to the renewal of vehicle fleet, the use of catalytic technologies and the improved quality of the used fuel. The results further indicate that for CO, NO_x and VOC the major source is road traffic, while for PM_2.5 and SO₂ both space heating andtraffic share responsibility. The air pollutant concentrations monitored by the network of 11 stations are reviewed and statistics related to air quality guidelines are presented. As fine particulate levels are not monitored, approximate PM_2.5and PM₁₀ concentrations are derived from black smoke ones on basis of experimentally determined conversion factors. The computed and monitored air pollution levels are compared and found in reasonable agreement. The results of the above analysisshow that the levels of all `classical' pollutants, with the exception of SO₂ and Pb, exceed significantly the WHO guidelines and are thus expected to exert a significant healthimpact. The latter could be quantified in relation to the PM_2.5 or PM₁₀ levels on the basis of risk assessment information developed by the World Health Organization (WHO). The results show that the existing levels of fine particle concentrations in Athens increase significantly the mortality and morbidity, and reduce the average longevity of the entirepopulation from 1.3 to 1.7 years.     

Planning effective industrial liquid waste controls in developing nations

The environmental planning principles described in this study address a problem which many developing nations face at some point along their industrialization process; alarming levels of water pollution, and limited background, expertize and organization to combat it effectively.A rapid pollution assessment methodology has been recently developed [1], [2], [3] enabling such countries to conduct valuable waste source inventories within reasonable time, with few people and little support. The present study describes how to use such inventory data in order to derive high priority waste control measures, formulate an effective national strategy for industrial waste control, organize meaningful industrial effluent survey and water monitoring programs, as well as lay down a rational land-use planning policy for industrial expansion.