Estimation of transport and degradation parameters for naphthalene and anthracene: influence of mass transfer on kinetics

The distributions of culturable bacteria and functional bacteria associated with nitrogen (N) or phosphorus (P) in the backwater areas of the Three Gorges Reservoir (TGR) were investigated. Results from seven locations in the TGR indicated that the abundance of total bacteria was high, with 8.12 × 10⁶, 2.70 × 10⁷, and 6.73 × 10¹⁰ colony-forming units per milliliter or per gram dry weight in surface water, bottom water, and sediments, respectively. Aquatic environments with higher nutrient loadings possessed higher bacteria densities and lower bacteria community diversities. Eight kinds of functional bacteria ratios, including surface water to bottom water and ratios of water to sediments, were calculated, in which four kinds of functional bacteria, namely, nitrogen-fixing bacteria, ammonia-oxidizing bacteria, nitrite-oxidizing bacteria, and organophosphate-solubilizing bacteria, displayed obvious differences in different locations. Based on the functional bacteria ratios of water to sediments, it was found that the obtained result of location grouping from cluster analysis was similar to that based on the community-level physiological profiles studies. The above results showed that the ratios of functional bacteria could distinguish the aquatic environments with different trophic conditions in the TGR. This demonstrated that the distribution ratios of functional bacteria in aquatic environments could work as potential bioindicators to reflect the trophic condition of the water.     

Using the Sediment Quality Triad to characterize baseline conditions in the Anacostia River, Washington, DC, USA

The Sediment Quality Triad (SQT) consists of complementary measures of sediment chemistry, benthic community structure, and sediment toxicity. We applied the SQT at 20 stations in the tidal portion of the Anacostia River from Bladensburg, MD to Washington, DC to establish a baseline of conditions to evaluate the effects of management actions. Sediment toxicity was assessed using 10-day survival and growth tests with the freshwater amphipod, Hyalella azteca and the midge, Chironomus dilutus. Triplicate grabs were taken at each station for benthic community analysis and the Benthic Index of Biotic Integrity (B-IBI) was used to interpret the data. Only one station, #92, exhibited toxicity related to sediment contamination. Sediments from this station significantly inhibited growth of both test species, had the highest concentrations of contaminants, and had a degraded benthic community, indicated by a B-IBI of less than 3. Additional sediment from this station was tested and sediment toxicity identification evaluation (TIE) procedures tentatively characterized organic compounds as the cause of toxicity. Overall, forty percent of the stations were classified as degraded by the B-IBI. However, qualitative and quantitative comparisons with sediment quality benchmarks indicated no clear relationship between benthic community health and contaminant concentrations. This study provides a baseline for assessing the effectiveness of management actions in the Anacostia River.     

Incentives to diffuse advanced abatement technology under environmental liability law

Polluting firms with advanced abatement technology at their disposal have incentives or disincentives to share this technology with other polluting firms. The ‘direction’ and extent of those incentives depends on the liability rule applicable and the way technical change impacts marginal abatement costs. We establish that incentives for diffusion are socially optimal under strict liability and socially suboptimal under negligence if technical change lowers marginal abatement costs for all levels of abatement. Negligence may, however, induce better diffusion incentives than strict liability if technical change decreases (increases) marginal abatement costs for low (high) levels of abatement.     

Circulation and Stream Plume Modeling in Conesus Lake

A three-dimensional hydrodynamic model that includes the effect of drag from macrophytes was applied to Conesus Lake to study the seasonal circulation and thermal structure during spring and early summer. Local weather conditions and stream flow data were used to drive the model. The drag coefficient for macrophytes was calculated as a function of leaf density. In general, the model results show good agreements with the observations, including vertical temperature profiles measured at two locations and average surface temperature derived from calibrated thermal imagery for large-scale simulations of the entire lake. Additional high-resolution simulations were carried out to understand water circulation and transport of sediment and model-generated tracer during hydrometeorological events at stream mouths for two experimental sites. The model results show that the plume development at stream mouths during storm events in Conesus Lake are site-dependent and may either be current- or wind-driven. The results also show a significant effect from the presence of macrophytes on sediment deposition near stream mouths.     

Symposium Objectives

The Control Systems Laboratory (CSL) of the Environmental Protection Agency has been developing improved technology for the control of participate emissions from stationary sources for nearly ten years. Starting about three years ago, emphasis has been gradually shifted to the study of fine particulate which we define as solid or liquid particles less than about 3µ in diameter. Rationale for this shift in emphasis is covered in Mr. Harrington’s Keynote Paper.     

Kinetic Sequential Sampling (KSS) System: An Automated Sampling System for Measuring Vertical Concentration Profiles of Airborne Particles

ABSTRACT

An electronically controlled lift system carrying a realtime particle monitor has been developed for sampling air sequentially, at different heights within the breathing zone. Data are automatically logged at the different receptor levels, for the determination of average vertical concentration profiles of airborne particulate matter. The system is easy to operate, portable, and easily extended to different heights or modified for use with other types of monitors (e.g., a portable CO analyzer). For measuring airborne particle concentrations, a Grimm Dust Monitor 1.104/5 was used. The results of trial runs, which were carried out indoors and in a relatively open semi-rural area, are presented, and applications of the kinetic sequential sampling (KSS) system are discussed.     

Measuring Concentrations of Volatile Organic Compounds in Vinyl Flooring

ABSTRACT

The initial solid-phase concentration of volatile organic compounds (VOCs) is a key parameter influencing the emission characteristics of many indoor materials. Solid-phase measurements are typically made using solvent extraction or thermal headspace analysis. The high temperatures and chemical solvents associated with these methods can modify the physical structure of polymeric materials and, consequently, affect mass transfer characteristics.

To measure solid-phase concentrations under conditions resembling those in which the material would be installed in an indoor environment, a new technique was developed for measuring VOC concentrations in vinyl flooring (VF) and similar materials. A 0.09-m² section of new VF was punched randomly to produce ~200 0.78-cm² disks. The disks were milled to a powder at -140 °C to simultaneously homogenize the material and reduce the diffusion path length without loss of VOCs. VOCs were extracted from the VF particles at room temperature by fluidized-bed desorption (FBD) and by direct thermal desorption (DTD) at elevated temperatures. The VOCs in the extraction gas from FBD and DTD were collected on sorbent tubes and analyzed by gas chromatog-raphy/mass spectrometry (GC/MS). Seven VOCs emitted by VF were quantified. Concentration measurements by FBD ranged from 5.1 |ig/g VF for n-hexadecane to 130 |Jg/g VF for phenol. Concentrations measured by DTD were higher than concentrations measured by FBD. Differences between FBD and DTD results may be explained using free-volume and dual-mobility sorption theory, but further research is necessary to more completely characterize the complex nature of a diffusant in a polymer matrix.     

Unusual polar metabolites in the groundwater of a contaminated waste site indicate a new pathway of mononitrotoluene transformation

At a mononitrotoluene-contaminated waste disposal site, the groundwater was screened for polar transformation products of mononitrotoluenes, by means of HPLC-MS, HPLC-NMR and further off-line NMR and MS techniques. Besides expected metabolites such as aminotoluenes (ATs) and nitrobenzoic acids (NBAs), three unknowns (di- and tetrahydro-derivatives of (2-oxo-quinolin-3-yl) acetic acid) could be identified which, in the context of explosives and related compounds, are new metabolites. Evidence could be provided by microcosm experiments with 2-nitrotoluene (2-NT) that these metabolites are microbial transformation products of 2-NT under anaerobic conditions. The NMR and MS data are presented and the possible pathway for the formation of these metabolites after addition of 2-NT to fumarate is discussed.