2-Nitroso-1-naphthol as a selective reagent for preconcentration of cobalt by vortex assisted combined with solidification of organic droplet and its determination by flame atomic absorption spectrometry

Highly rapid and selective vortex-assisted liquid–liquid microextraction based on solidification of organic drop has been used for determination of cobalt ion. 2-Nitroso-1-naphthol (2N1N) was used as a selective complexing agent to form stable cobalt–2N1N complex which can be extracted with 1-undecanol at a short time by the assistance of vortex agitator system followed by its determination using flame atomic absorption spectrometry. In vortex assisted, vigorous vortex stream as well as the vibrant effect of vortex system cause very fine droplets of extraction solvent to be produced and extraction occurred at a short time. Some parameters influencing the extraction process such as pH of samples, concentration of 2-nitroso-1-naphthol, extraction solvent volume, extraction time, ionic strength and surfactant addition, as well as interferences were evaluated in detail and optimum conditions were selected. At the optimum conditions, the calibration curve was linear in the range of 15 to 400 μg L^?1 of cobalt ions. The relative standard deviation based on ten replicate analysis of sample solution containing 50 μg L^?1 of cobalt was 3.4 %. The detection limit (calculated as the concentration equivalent to three times of the standard deviation of the blank divided by the slope of the calibration curve after preconcentration) was 5.4 μg L^?1. The accuracy of the proposed method was successfully evaluated by the analysis of certified reference materials. This selective and highly rapid method was used for determination of cobalt ions in different water samples.     

Benzo(a)pyrene induced structural and functional modifications in lung cystatin

Cystatins are thiol proteinase inhibitors ubiquitously present in the mammalian body. They serve a protective function to regulate the activities of endogenous proteinases, which may cause uncontrolled proteolysis and damage. In the present study, the effect of benzo(a)pyrene [BaP] on lung cystatin was studied to explore the hazardous effects of environmental pollutant on structural and functional integrity of the protein. The basic binding interaction was studied by UV-absorption, FT-IR, and fluorescence spectroscopy. The enhancement of total protein fluorescence with a red shift of 5 nm suggests structural scratch of lung cystatin by benzo(a)pyrene. Further, ANS binding studies reaffirm the unfolding of the thiol protease inhibitor (GLC-I) after treating with benzo(a)pyrene. The results of FT-IR spectroscopy reflect perturbation of the secondary conformation (alpha-helix to β-sheet) in goat lung cystatin on interaction with BaP. Finally, functional inactivation of cystatin on association with BaP was checked by its papain inhibitory activity. Benzo(a)pyrene (10 μM) caused complete inactivation of goat lung cystatin. Benzo(a)pyrene-induced loss of structure and function in the thiol protease inhibitor could provide a caution for lung injury caused by the pollutants and smokers.     

Calibration and verification of a dissolved oxygen management model for a highly polluted river with extreme flow variations in Pakistan

A dissolved oxygen (DO) model is calibrated and verified for a highly polluted River Ravi with large flow variations. The model calibration is done under medium flow conditions (431.5 m³/s), whereas the model verification is done using the data collected during low flow conditions (52.6 m³/s). Biokinetic rate coefficients for carbonaceous biochemical oxygen demand (CBOD) and nitrogenous biochemical oxygen demand (NBOD) (i.e, K _cr and K _n ) are determined through the measured CBOD and ammonia river profiles. The calculated values of K _cr and K _n are 0.36 day^?1 and 0.34 day^?1, respectively. The close agreement between the DO model results and the field values shows that the verified model can be used to develop DO management strategies for the River Ravi. The biokinetic coefficients are known to vary with degree of treatment (DOT) and therefore need to be adjusted for a rational water quality management model. The effect of this variation on level of treatment has been evaluated by using the verified model to attain a DO standard of 4 mg/L in the river using the biokinetic rate coefficients as determined during the model calibration and verification process. The required DOT in this case is found to be 96 %, whereas the DOT is 86 % if adjusted biokinetic rate coefficients are used to reflect the effect of wastewater treatment. The cost of wastewater treatment is known to increase exponentially as the removal efficiency increases; therefore, the use of appropriate biokinetic coefficients to manage the water quality in rivers is important.     

Assessing the suitability of stream water for five different uses and its aquatic environment

Surface water is one of the essential resources for supporting sustainable development. The suitability of such water for a given use depends both on the available quantity and tolerable quality. Temporary status for a surface water quality has been identified extensively. Still the suitability of the water for different purposes needs to be verified. This study proposes a water quality evaluation system to assess the aptitude of the Selangor River water for aquatic biota, drinking water production, leisure and aquatic sport, irrigation use, livestock watering, and aquaculture use. Aptitude of the water has been classified in many parts of the river segment as unsuitable for aquatic biota, drinking water production, leisure and aquatic sport as well as aquaculture use. The water quality aptitude classes of the stream water for nine locations along the river are evaluated to contribute to decision support system. The suitability of the water for five different uses and its aquatic ecosystem are verified.     

Assessing implications of land use and land cover changes in forest ecosystems of NE Turkey

Monitoring land use and land cover change (LUCC) and understanding forest cover dynamics is extremely important in sustainable development and management of forest ecosystems. This study analyzed the spatial and temporal pattern of LUCC in the Yaln?zçam and U?urlu forest planning units which are located in the northeast corner of Turkey. The investigation also evaluates the temporal changes of the spatial structure of forest conditions through the spatial analysis of forest-cover type maps from 1972 and 2005 using geographical information systems and FRAGSTATS^TM. As an overall change between 1972 and 2005, there was a net increase of 1,823 ha in forested areas, and cumulative forest improvement accounted for 2.06 %. In terms of spatial configuration, the landscape structure in the study area changed substantially over the 33-year study period, resulting in fragmentation of the landscape as indicated by large patch numbers and smaller mean patch sizes, owing to heavy grazing, illegal cutting, and uncontrolled stand treatments.     

Effect of vehicle exhaust on the quantity of polycyclic aromatic hydrocarbons (PAHs) in soil

PAHs are formed during the incomplete combustion of organic substances containing carbon and hydrogen and are one of the first atmospheric pollutants identified as carcinogens. Most of the PAH environmental burden is found in the soil (95%). Soil samples collected from different roadsides were analyzed for seven polycyclic aromatic hydrocarbons (PAHs). The quantitative and qualitative analysis was carried out by UV Spectrophotometer. The individual PAH value ranged from 0.1 to 18.0 mg/kg. Phenenthrene and Pyrene were found to be the most abundant compounds. Vehicle emissions are the principal source of PAH in the Roadside soils. The highest concentration was found at site S2 (Hasthtnagri Roadside) which shows the highest traffic density.     

A comparison of radiometric correction techniques in the evaluation of the relationship between LST and NDVI in Landsat imagery

Atmospheric corrections for multi-temporal optical satellite images are necessary, especially in change detection analyses, such as normalized difference vegetation index (NDVI) rationing. Abrupt change detection analysis using remote-sensing techniques requires radiometric congruity and atmospheric correction to monitor terrestrial surfaces over time. Two atmospheric correction methods were used for this study: relative radiometric normalization and the simplified method for atmospheric correction (SMAC) in the solar spectrum. A multi-temporal data set consisting of two sets of Landsat images from the period between 1991 and 2002 of Penang Island, Malaysia, was used to compare NDVI maps, which were generated using the proposed atmospheric correction methods. Land surface temperature (LST) was retrieved using ATCOR3_T in PCI Geomatica 10.1 image processing software. Linear regression analysis was utilized to analyze the relationship between NDVI and LST. This study reveals that both of the proposed atmospheric correction methods yielded high accuracy through examination of the linear correlation coefficients. To check for the accuracy of the equation obtained through linear regression analysis for every single satellite image, 20 points were randomly chosen. The results showed that the SMAC method yielded a constant value (in terms of error) to predict the NDVI value from linear regression analysis-derived equation. The errors (average) from both proposed atmospheric correction methods were less than 10%.     

Selection of MSW landfill site for Konya, Turkey using GIS and multi-criteria evaluation

Landfill is a common solution for the final disposal of municipal solid waste (MSW) in Turkey. Landfill siting is an extremely difficult task to accomplish because the site selection process depends on different factors and regulations. To ensure that an appropriate site is chosen, a systematic process should be developed and followed. Unsuccessful landfill siting is typically the result of strong public opposition. In this study, candidate sites for an appropriate landfill area in Cumra County of Konya City are determined by using the integration of geographic information systems (GIS) and multi-criteria evaluation (MCE). ArcGIS 9.0 software and its extensions were used as the GIS tool since it is able to perform suitability analysis using MCE analysis. To identify appropriate landfill areas in the Cumra district, eight input map layers including proximity to municipal and local wells and irrigational canals, distance from transportation routes and rails, distance from archaeological sites, distance from urban areas, land use/land cover, and land slope are used in constraint mapping. A final map was generated which identifies regions showing suitability for the location of the landfill site. According to the map, 6.8% of the study area is most suitable, 15.7% is suitable, 10.4% is moderately suitable, 25.8% is poorly suitable, and 41.3% is unsuitable. At the end of the analyses, three candidate sites are determined. The selection of the final MSW landfill site, however, requires further field research.     

Detecting micronuclei frequency in some aquatic organisms for monitoring pollution of Izmir Bay (Western Turkey)

Micronuclei tests is a system of mutagenicity testing used for determining the pollution and chemicals causing changes in DNA fragments such as micronuclei in the cytoplasm of interphase cells. Damage caused on the DNA by genotoxic pollutants is the first consequence occurring in the aquatic organisms. Thus, it was attempted to determine whether pollution affected the erythrocytes and gills of fish Gobius niger and haemolymph and gills of mussels Mytilus galloprovincialis living in Izmir Bay at the level of DNA by the means of micronuclei (MN) test. Organisms used in the MN test were collected from seven locations (Alsancak, Alaybey Shipyard, Karsiyaka, Bostanli, Göztepe, Konak and Pasaport) which are known as the most polluted part of inner Bay of Izmir (Western Coast of Turkey). According to the results of the present study, frequency of MN was found at high level in Alaybey Shipyard and Pasaport where wastes from existing dockyard contributed to high level of pollution. In conclusion, this study indicates that the micronuclei test gives sensitive results in monitoring the pollution, especially the pollution of harbor, and thus it might be used as standard method in regular monitoring of pollution of coastal ecosystem.     

Environmental impact of coal mining and coal seam gas production on surface water quality in the Sydney basin,Australia

The extraction of coal and coal seam gas (CSG) will generate produced water that, if not adequately treated, will pollute surface and groundwater systems. In Australia, the discharge of produced water from coal mining and related activities is regulated by the state environment agency through a pollution licence. This licence sets the discharge limits for a range of analytes to protect the environment into which the produced water is discharged. This study reports on the impact of produced water from coal mine activities located within or discharging into high conservation environments, such as National Parks, in the outer region of Sydney, Australia. The water samples upstream and downstream from the discharge points from six mines were taken, and 110 parameters were tested. The results were assessed against a water quality index (WQI) which accounts for pH, turbidity, dissolved oxygen, biochemical oxygen demand, total dissolved solids, total phosphorus, nitrate nitrogen and E .coli. The water quality assessment based on the trace metal contents against various national maximum admissible concentration (MAC) and their corresponding environmental impacts was also included in the study which also established a base value of water quality for further study. The study revealed that impacted water downstream of the mine discharge points contained higher metal content than the upstream reference locations. In many cases, the downstream water was above the Australia and New Zealand Environment Conservation Council and international water quality guidelines for freshwater stream. The major outliers to the guidelines were aluminium (Al), iron (Fe), manganese (Mn), nickel (Ni) and zinc (Zn). The WQI of surface water at and downstream of the discharge point was lower when compared to upstream or reference conditions in the majority of cases. Toxicology indices of metals present in industrial discharges were used as an additional tool to assess water quality, and the newly proposed environmental water quality index (EWQI) lead to better trend in the impact of coal and coal seam gas mining activities on surface water quality when compared to the upstream reference water samples. Metal content limits were based on the impact points assigned by the Agency for Toxic Substances and Disease Registry, USA. For environmental and health impact assessment, the approach used in this study can be applied as a model to provide a basis to assess the anthropogenic contribution from the industrial and mining activities on the environment.