Preliminary assessment of indoor industrial noise pollution in Kuwait

Sound is considered as a pollutant when it exceeds undesirable limits for the recipient. One of the significant environmental problems associated with industries is noise pollution generated by machinery. The main objectives of this study were to measure noise levels generated by machinery that the workers were exposed to at five industrial facilities in the State of Kuwait. Also, to assess if these levels were within acceptable standards, for Kuwait lacks environmental standards for such a pollutant. To achieve the objectives of the study two food manufacturing companies, a cement-brick making plant, a furniture factory and a car washing facility were selected for the purpose of the research.The study showed that workers operating machinery at the five facilities were exposed to high noise levels without any kind of ear protection. Noise levels recorded during the study were very high and exceeded the British Noise at Work Regulations of 1989. In Kuwait there are no regulations to abate noise in the working environment and workers are not required to wear ear protective muffs. The results of the study indicate that, the concerned environmental and health organisations in Kuwait should be compelled to establish noise level standards and controls to safeguard the health of workers and the public at large.     

Dust exposures in tractor and combine operations in eastern Mediterranean, Turkey

The objective of this study was to determine the dust concentrations in selected tractor and combine operations in eastern Mediterranean region in Turkey Mean dust concentrations were 137.9 mg m(-3), 83.6 mg m(-3), 80.3 mg m(-3), and 88.8 mg m(-3) respectively for soil packing, furrowing, straw making, and baling on tractors with no cabins whereas 106.9 mg m(-3) was found in combines without cabins, which are much higher than the limit dust concentration (10 mg m(-3)) considered hazardous for workers' health. In tractor operations with field-installed cabins, mean dust concentrations were 5.6 mg m(-3), 6.6 mg m(-3), 6.4 mg m(-3), and 3.7 mg m(-3), respectively in soil packing, furrowing, straw making, and baling while 4.7 mg m(-3) was measured in combines with field-installed cabins. Considering unit-manufactured cabins, mean dust concentrations were 1.1 mg m(-3), 1.6 mg m(-3), 3.2 mg m(-3), and 1.4 mg m(-3) respectively in tractor operations, and 1.4 mg mr(-3) in combine operations. Variance analyses showed that not only the respiration environment of the workers but also the field operation had a significant effect on measured dust concentrations (p < 0.01). Pearson correlation coefficient was 0.74 (very strong level) between dust concentration and wind speed in soil packing, 0.46 (medium level) between dust concentration and wind speed in baling, and 0.44 (medium level) between dust concentration and ground speed in combining.     

Determination of metal accumulation in deposited street dusts in Amman, Jordan

Street dust samples (120 in total) were collected under stable weather conditions during the hot, dry season (August and September) of 2004 from six different localities (industrial, heavy traffic, medium traffic, light traffic, low traffic and rural) in greater Amman, the capital of Jordan. The concentrations of Fe, Cu, Cd, Pb, Zn and Ni in the dusts were determined by atomic absorption spectrophotometry. The high concentrations of Pb, Fe and Zn in the street dust samples were related to both anthropogenic (industrial sources combined with traffic sources) and natural sources. Surprisingly, the concentrations of Cd in the dusts were low. Correlation coefficient analysis and principle component analysis identified three main sources of these elements and the corresponding distributions. The elements Pb, Zn, Cd, Fe, Cu and Ni were mainly derived from industrial sources, with Pb and Zn additionally derived from traffic sources. The street dusts were found to have highly elevated levels of Zn, particularly along the main trunk roads, indicating that the Zn in the street dusts may be derived from traffic sources, especially vehicle tyres. The concentrations of metals in the different street dust samples were found to vary depending on the density of traffic.     

陕北黄土丘陵区不同土地利用方式下土壤碳剖面分布特征

黄土高原土层深厚,土壤剖面碳存储受土地利用方式影响明显.为探讨不同土地利用方式对深层土壤碳分布的影响,研究了人工经济林地(陕北米脂)、退耕还林地(神木)和防风固沙林地(榆林榆阳区)0~20.0 m土壤有机碳(SOC)和无机碳(SIC)的分布特征和差异.结果表明,在不同土地利用方式下SOC含量:矮化枣树(2.00 g·kg~(-1))未矮化枣树(1.54 g·kg~(-1))柠条林(0.97 g·kg~(-1))退化人工草地(0.81 g·kg~(-1))樟子松林(0.70 g·kg~(-1))荒草地(0.45 g·kg~(-1)),且各剖面之间SOC含量存在显著性差异(P0.05).在不同土地利用方式下SIC含量:矮化枣树(11.66 g·kg~(-1))≥未矮化枣树(11.59g·kg~(-1))柠条林(9.62 g·kg~(-1))退化人工草地(8.07 g·kg~(-1))樟子松林(4.32 g·kg~(-1))荒草地(0.47 g·kg~(-1));人工经济林和退耕还林(草)样地内所有土壤剖面之间SIC含量无显著性差异;人工经济林、退耕还林(草)剖面和防风固沙林地剖面SIC含量存在显著性差异(P0.05).矮化枣树、未矮化枣树、柠条林、退化人工草地、樟子松林和荒草地土壤剖面无机碳密度分别是有机碳密度的6.19、7.71、10.80、10.78、5.91和1.03倍.综上可见,不同土地利用方式之间土壤碳储量存在明显差异,无机碳的含量远高于有机碳.     

Enhanced catalytic complete oxidation of 1,2-dichloroethane over mesoporous transition metal-doped γ-Al2O3

High-surface-area mesoprous powders of γ-Al₂O₃ doped with Cu^2 +, Cr^3 +, and V^3 + ions were prepared via a modified sol–gel method and were investigated as catalysts for the oxidation of chlorinated organic compounds. The composites retained high surface areas and pore volumes comparable with those of undoped γ-Al₂O₃ and the presence of the transition metal ions enhanced their surface acidic properties. The catalytic activity of the prepared catalysts in the oxidation of 1,2-dichloroethane (DCE) was studied in the temperature range of 250–400°C. The catalytic activity and product selectivity were strongly dependent on the presence and the type of dopant ion. While Cu^2 +- and Cr^3 +-containing catalysts showed 100% conversion at 300°C and 350°C, V^3 +-containing catalyst showed considerably lower conversion. Furthermore, while the major products of the reactions over γ-alumina were vinyl chloride (C₂H₃Cl) and hydrogen chloride (HCl) at all temperatures, Cu- and Cr-doped catalysts showed significantly stronger capability for deep oxidation to CO₂.     

TiO2–PANI/Cork composite: A new floating photocatalyst for the treatment of organic pollutants under sunlight irradiation

A novel photocatalyst based on TiO_2–PANI composite supported on small pieces of cork has been reported. It was prepared by simple impregnation method of the polyaniline(PANI)–modified TiO_2 on cork. The TiO_2–PANI/Cork catalyst shows the unique feature of floating on the water surface. The as-synthesized catalyst was characterized by X-ray diffraction(XRD),scanning electron micrograph(SEM), transmission electron microscopy(TEM), thermogravimetric analysis(TGA), Fourier transform infrared spectroscopy(FT-IR), UV–vis diffuse reflectance spectra(UV–vis DRS) and the Brunauer–Emmett–Teller(BET) surface area analysis. Characterization suggested the formation of anatase highly dispersed on the cork surface. The prepared floating photocatalyst showed high efficiency for the degradation of methyl orange dye and other organic pollutants under solar irradiation and constrained conditions, i.e., no-stirring and no-oxygenation. The TiO_2–PANI/Cork floating photocatalyst can be reused for at least four consecutive times without significant decrease of the degradation efficiency.     

长期施肥对棕壤有机碳储量及固碳速率的影响

利用棕壤肥料长期定位试验,研究了不同施肥条件下棕壤有机碳在0~60 cm土层的含量和储量特征以及土壤固碳速率.试验共设6个处理,即氮磷肥有机肥配施(M_2NP)、氮肥有机肥配施(M_2N)、单施有机肥(M_2)、单施氮肥(N)、氮磷肥配施(NP)和不施肥处理(CK).结果表明:经过31年长期不同施肥,各处理土壤有机碳(SOC)含量和储量的剖面分布均呈现随土层深度增加而显著降低的规律.本试验条件下M_2NP、M_2N、M_2、NP、N、CK处理的耕层有机碳富集系数分别为0.465、0.455、0.407、0.48_2、0.393、0.471,表明耕层土壤对有机碳的保持强度最强.在0~60 cm土层土壤有机碳储量表现为M_2NP、M_2NM_2、NPNCK,有机肥和化肥配施能够显著提高土壤有机碳含量和储量.与试验前相比,CK处理各土层土壤有机碳含量和储量均显著降低.各处理碳库管理指数(CPMI)表现为M_2NPM_2NM_2NNPCK.分析不同施肥处理土壤固碳速率可知,与试验前相比,CK处理表现为碳的净释放,固碳速率达-401.4 kg·hm~(-_2)·a~(-1);固碳速率最高的为M_2NP,M_2N,分别达到489kg·hm~(-_2)·a~(-1)、440._2 kg·hm~(-_2)·a~(-1).综合结果表明,化肥、有机肥配施所产生交互效应更有利于棕壤有机碳储量的增加及固碳速率的提高.     

Lead(II) and cadmium(II) removal from aqueous solution using processed walnut shell: kinetic and equilibrium study

The biosorption potential of processed walnut shell for Pb(II) and Cd(II) ions from aqueous solutions was explored. The effects of pH, contact time, initial ion concentration, and amount of dried adsorbent were studied in batch experiments. The maximum adsorption was achieved within the pH range 4.0–6.0. The equilibrium data were well fitted by the Langmuir isotherm model. The maximum monolayer adsorption capacities were found to be 32?g?kg^?1 and 11.6?g?kg^?1 for Pb(II) and Cd(II) ions, respectively. Kinetic data were best described by the pseudo-second-order model. The structural features of the adsorbent were characterized by Fourier transform infrared spectroscopy, which confirmed the involvement of hydroxyl (–OH), carboxyl (–COO^–), and carbonyl (C=O) groups in metal sorption. This readily available adsorbent is efficient in the uptake of Pb(II) and Cd(II) ions from an aqueous solution and could be used for the treatment of wastewater streams bearing these metal ions.     

Property-performance relationship of core-shell structured black TiO2 photocatalyst for environmental remediation

● Properties and performance relationship of CSBT photocatalyst were investigated. ● Properties of CSBT were controlled by simply manipulating glycerol content. ● Performance was linked to semiconducting and physicochemical properties. ● CSBT (W:G ratio 9:1) had better performance with lower energy consumption. ● Phenols were reduced by 48.30% at a cost of $2.4127 per unit volume of effluent. Understanding the relationship between the properties and performance of black titanium dioxide with core-shell structure (CSBT) for environmental remediation is crucial for improving its prospects in practical applications. In this study, CSBT was synthesized using a glycerol-assisted sol-gel approach. The effect of different water-to-glycerol ratios (W:G = 1:0, 9:1, 2:1, and 1:1) on the semiconducting and physicochemical properties of CSBT was investigated. The effectiveness of CSBT in removing phenolic compounds (PHCs) from real agro-industrial wastewater was studied. The CSBT synthesized with a W:G ratio of 9:1 has optimized properties for enhanced removal of PHCs. It has a distinct core-shell structure and an appropriate amount of Ti³⁺ cations (11.18%), which play a crucial role in enhancing the performance of CSBT. When exposed to visible light, the CSBT performed better: 48.30% of PHCs were removed after 180 min, compared to only 21.95% for TiO₂ without core-shell structure. The CSBT consumed only 45.5235 kWh/m³ of electrical energy per order of magnitude and cost $2.4127 per unit volume of treated agro-industrial wastewater. Under the conditions tested, the CSBT demonstrated exceptional stability and reusability. The CSBT showed promising results in the treatment of phenols-containing agro-industrial wastewater.