Interactions of tillage and rainfall on atrazine leaching under field and laboratory conditions

Laboratory studies were conducted to evaluate effects of tillage reversal and rainfall on ¹⁴C-atrazine (2-chloro4-ethylamino-6-isopropylamino- -triazine) leaching patterns. Twelve intact soil cores (16 cm dia x 20 cm deep) were collected from 8-yr no-till (NT) fields. Half the cores were tilled (5 cm deep) prior to ¹⁴C-atrazine treatment (2.7 mg core⁻¹) to all cores. All cores received two rains (27 mm rain in 1.5 h, one day after application followed, two days later, by a 17 mm rain in 2.5 h) and leachate was collected and analyzed for atrazine. These rains simulated the timing, amount and duration of natural rainfall events from a tillage reversal field study. During the first high inte ity rainfall event, a pulse (2.1 μg L-1) of atrazine leached through tilled cores while leaching rate was linear and decreased (1.25 to 0.9 μg L-1) through un-tilled cores. Leaching rate was linear for both the tilled and un-tilled cores during the second rain. Less atrazine was left in the surface 5 cm of tilled soil than un-tilled after the two rains. Results confirmed field observations and suggested that when tillage is reversed on well structured soils, pesticide leaching may increase relative to un-tilled soil but these effects are probably confined to the first rain events after application only.     

Used lubricating oil recycling using hydrocarbon solvents

A solvent extraction process using new hydrocarbon solvents was employed to treat used lubricant oil. The solvents used were liquefied petroleum gas (LPG) condensate and stabilized condensate. A demulsifier was used to enhance the treatment process. The extraction process using stabilized condensate demonstrated characteristics that make it competitive with existing used oil treatment technologies. The process is able to reduce the asphaltene content of the treated lubricating oil to 0.106% (w/w), the ash content to 0.108%, and the carbon residue to 0.315% with very low levels of contaminant metals. The overall yield of oil is 79%. The treated used oil can be recycled as base lubricating oil. The major disadvantage of this work is the high temperature of solvent recovery. Experimental work and results are presented in detail.     

Decision making for multiple utilization of water resources in New Zealand

The Clutha is the largest river in New Zealand. The last two decades have witnessed major conflicts centered on the utilization of the water resources of the upper Clutha river. These conflicts have by no means been finally resolved. The focus of this article is on institutional arrangements for water resource management on the Clutha, with particular reference to the decision-making processes that have culminated in the building of the high dam. It critically evaluates recent experiences and comments on future prospects for resolving resource use conflicts rationally through planning for multiple utilization in a climate of market led policies of the present government.The study demonstrates the inevitable conflicts that can arise within a public bureaucracy that combines dual responsibilities for policy making and operational functions. Hitherto, central government has been able to manipulate the water resource allocation process to its advantage because of a lack of clear separation between its two roles as a policy maker and developer. The conflicts that have manifested themselves during the last two decades over the Clutha should be seen as part of a wider public debate during the last two decades concerning resource utilization in New Zealand. The Clutha controversy was preceded by comparable concerns over the rising of the level of Lake Manapouri during the 1960s and has been followed by the debate over the think big resource development projects during the 1980s.The election of the fourth Labour government in 1983 has heralded a political and economic policy shift in New Zealand towards minimizing the role of public intervention in resource allocation and major structural reforms in the relative roles of central and regional government in resource management. The significance of these changes pose important implications for the future management of the Clutha.     

Heavy metal contamination from mining sites in South Morocco: 1. Use of a biotest to assess metal toxicity of tailings and soils

Our work was conducted to investigate the heavy metal toxicity of tailings and soils collected from five metal mines located in the south of Morocco. We used the MetPAD biotest Kit which detects the toxicity specifically due to the heavy metals in environmental samples. This biotest initially developed to assess the toxicity of aquatic samples was adapted to the heterogeneous physico-chemical conditions of anthropogenic soils. Contrasted industrial soils were collected from four abandoned mines (A, B, C and E) and one mine (D) still active. The toxicity test was run concurrently with chemical analyses on the aqueous extracts of tailings materials and soils in order to assess the potential availability of heavy metals. Soil pH was variable, ranging from very acidic (pH 2.6) to alkaline values (pH 8.0-8.8). The tailings from polymetallic mines (B and D) contained very high concentrations of Zn (38,000-108,000 mg kg(-1)), Pb (20,412-30,100 mg kg(-1)), Cu (2,019-8,635 mg kg(-1)) and Cd (148-228 mg kg(-1)). Water-extractable metal concentrations (i.e., soil extracts) were much lower but were highly toxic as shown by the MetPAD test, except for soils from mines A, E and site C3 from mine C. The soil extracts from mine D were the most toxic amongst all the soils tested. On this site, the toxicity of soil water extracts was mainly due to high concentrations of Zn (785-1,753 mg l(-1)), Cu (1.8-82 mg l(-1)) and Cd (2.0-2.7 mg l(-1)). The general trend observed was an increase in metal toxicity measured by the biotest with increasing available metal contents in tailings materials and soils. Therefore, the MetPAD test can be used as a rapid and sensitive predictive tool to assess the heavy metal availability in soils highly contaminated by mining activities.     

Spatial distribution of polybrominated diphenyl ethers in coastal marine sediments receiving industrial and municipal effluents in Kuwait

Polybrominated diphenyl ether (PBDE) concentrations were measured in surficial sediments from coastal sediments receiving industrial and municipal effluents in Kuwait. The summation PBDE concentrations varied by two orders of magnitude ranging from 80 to 3800 pg g(-1)dw. The congener distribution was dominated by BDE 183, with minor contributions from BDEs 154 and 153. The similarity between the congener profile to that of the technical octa formulation (Bromkal 79-8DE) suggests a source of this product in Kuwait. The observed gradient in concentration distribution, with high summation PBDE concentrations near the shore and an exponential decrease seaward, indicates that wastewater discharge from industrial activities in the study area is the primary source of these compounds in the sediments.     

Potential contributions of clay minerals and organic matter to pentachlorophenol retention in soils

Sorption of pentachlorophenol (PCP) by pure minerals and humic acids were measured to obtain additional perspective on the potential contributions of both clay minerals and soil organic matter (SOM) to contaminants retention in soils. Four types of common soil minerals and two kinds of humic acids (HAs) were tested. The sorption affinity for PCP conformed to an order of HAs > K-montmorillonite > Ca-montmorillonite > goethite > kaolinite. Such a difference in sorption capacity could be attributed to the crucial control of HAs. Clay minerals also had their contribution, especially K-montmorillonite, which played an important, if not dominant, role in the controlling process of PCP sorption. By removing 80% (on average) of the organic carbon from the soils with H(2)O(2), the sorption decreased by an average of 50%. The sorption reversibility had been greatly favored as well. Considering the uncharged mineral fractions in soil before and after H(2)O(2)-treated, the main variation in sorption behavior of the soil might thus be related to the removed organic carbon and the reduced pH. This testified rightly the interactive effect of SOM and clay minerals on PCP sorption as a function of pH.     

Epidemiology of occupational accidents among Iranian insured workers

Work-related accidents are considered as a major health problem worldwide. The aim of present study was to determine the epidemiological pattern of occupational accidents among workers insured by the Iranian Social Security Organization (ISSO) between 2001 and 2005.Subjects consisted of all workers and drivers who had a work-related accident during 2001–2005 and were registered in the Iranian Social Security Organization (ISSO) database according to the inspection reports. An ordinal logistic regression model (proportional odds regression model) was used to assess the concurrent effects of independent variables on accident outcomes.Overall, 86,437 work-related accidents were investigated. The accidents were more frequent in metal workplaces and electrical industries, respectively. More than half of the accidents were due to incautious activities. Workers’ age (age at the time of accident) (OR = 0.99, CI: 0.989–0.994), gender (OR = 1.3, CI: 1.191–1.683), marital status (OR = 1.25, CI: 1.143–1.675) as well as accident setting (OR = 1.88, CI: 1.728–1.975) had significant effect on accident outcomes. Pattern of occupational injuries in Iran was consistent with the global pattern for accident outcomes.     

Biomarkers of pyrethroid toxicity in fish

Environmental Chemistry Letters - Pesticides contribute to human welfare by reducing vector-borne diseases and protecting crops against pests. Insecticides are the most widely employed pesticides...