Rejection of emerging organic micropollutants in nanofiltration-reverse osmosis membrane applications.

The rejection of emerging trace organics by a variety of commercial reverse osmosis (RO), nanofiltration (NF), and ultra-low-pressure RO (ULPRO) membranes was investigated using TFC-HR, NF-90, NF-200, TFC-SR2, and XLE spiral membrane elements (Koch Membrane Systems, Wilmington, Massachusetts) to simulate operational conditions for drinking-water treatment and wastewater reclamation. In general, the presence of effluent organic matter (EfOM) improved the rejection of ionic organics by tight NF and RO membranes, as compared to a type-II water matrix (adjusted by ionic strength and hardness), likely as a result of a decreased negatively charged membrane surface. Rejection of ionic pharmaceutical residues and pesticides exceeded 95% by NF-90, XLE, and TFC-HR membranes and was above 89% for the NF-200 membrane. Hydrophobic nonionic compounds, such as bromoform and chloroform, exhibited a high initial rejection, as a result of both hydrophobic-hydrophobic solute-membrane interactions and steric exclusion, but rejection decreased significantly after 10 hours of operation because of partitioning of solutes through the membranes. This resulted in a partial removal of disinfection byproducts by the RO membrane TFC-HR. In a type-II water matrix, the effect of increasing feed water recoveries on rejection of hydrophilic ionic and nonionic compounds was compound-dependent and not consistent for different membranes. The presence of EfOM, however, could neutralize the effect of hydrodynamic operating condition on rejection performance. The ULPRO and tight NF membranes were operated at lower feed pressure, as compared to the TFC-HR, and provided a product water quality similar to a conventional RO membrane, regarding trace organics of interest.     

Effects of lindane on the photosynthetic apparatus of the cyanobacterium<Emphasis Type="Italic">anabaena</Emphasis>

INTENTION, GOAL, SCOPE, BACKGROUND: Cyanobacteria have the natural ability to degrade moderate amounts of organic pollutants. However, when pollutant concentration exceeds the level of tolerance, bleaching of the cells and death occur within 24 hours. Under stress conditions, cyanobacterial response includes the short-term adaptation of the photosynthetic apparatus to light quality, named state transitions. Moreover, prolonged stresses produce changes in the functional organization of phycobilisomes and in the core-complexes of both photosystems, which can result in large changes in the PS II fluorescence yield. The localization of ferredoxin-NADP+ reductase (FNR) at the ends of some peripheral rods of the cyanobacterial phycobilisomes, makes this protein a useful marker to check phycobilisome integrity. OBJECTIVE: The goal of this work is to improve the knowledge of the mechanism of action of a very potent pesticide, lindane (gamma-hexaclorociclohexane), in the cyanobacterium Anabaena sp., which can be considered a potential candidate for bioremediation of pesticides. We have studied the effect of lindane on the photosynthetic apparatus of Anabaena using fluorescence induction studies. As ferredoxin-NADP+ reductase plays a key role in the response to oxidative stress in several systems, changes in synthesis, degradation and activity of FNR were analyzed. Immunolocalization of this enzyme was used as a marker of phycobilisome integrity. The knowledge of the changes caused by lindane in the photosynthetic apparatus is essential for rational further design of genetically-modified cyanobacteria with improved biorremediation abilities. METHODS: Polyphasic chlorophyll a fluorescence rise measurements (OJIP) have been used to evaluate the vitality and stress adaptation of the nitrogen-fixing cyanobacterium Anabaena PCC 7119 in the presence of increasing concentrations of lindane. Effects of the pesticide on the ultrastructure have been investigated by electron microscopy, and FNR has been used as a marker of phycobilisome integrity. RESULTS AND DISCUSSION: Cultures of Anabaena sp. treated with moderate amounts of lindane showed a decrease in growth rate followed by a recovery after 72 hours of pesticide treatment. Concentrations of lindane below 5 ppm increased the photosynthetic performance and activity of the cells. Higher amounts of pesticide caused a decrease in these activities which seems to be due to a non-competitive inhibition of PS II. Active PS II units are converted into non-QA reducing, so called heat sink centers. Specific activity and amount of FNR in lindane-treated cells were similar to the values measured in control cultures. Release of FNR from the thylakoid after 48 hours of exposure to 5 ppm of lindane towards the cytoplasm was detected by immunogold labeling and electron microscopy. CONCLUSIONS: From these results, we conclude that the photosynthetic performance and activity of the cells are slightly increased in the presence of lindane up to 5 ppm. Moreover, in those conditions, lindane did not produce significant changes in the synthesis, degradation or activity of FNR. The high capability of Anabaena to tolerate lindane makes this cyanobacterium a good candidate for phytoremediation of polluted areas. RECOMMENDATION AND OUTLOOK: The results of this study show that cultures of Anabaena PCC 7119 tolerate lindane up to 5 ppm, without significant changes in the photosynthetic vitality index of the cells. However, a slight increase in phycobiliprotein synthesis is observed, which is related to total protein content. This change might be due to degradation of proteins less stable than phycobiliproteins. An identification of the proteins with altered expression pattern in the presence of the pesticide remains the subject of further work and will provide valuable information for the preparation of strains which are highly tolerant to lindane.     

Phytoremediation of petroleum hydrocarbons in tropical coastal soils II. microbial response to plant roots and contaminant

GOAL, SCOPE AND BACKGROUND: The goal of this study was to understand the interaction between plants and microorganisms during petroleum-hydrocarbon bioremediation in Pacific Islands coastal soils. Total bacteria and hydrocarbon-degrading microorganisms population dyanamics were examined in the rhizospheres of tropical trees and shrubs, which were evaluated for their phytoremediation potential in a greenhouse experiment. The respective and combined effects of plant roots and diesel contaminant on the microbial populations were determined in relation to diesel fuel depletion. An increase in the grading populations size of the hydrocarbon-degrading populations of microbes, elicited by rhizodeposition, is generally regarded as conducive to an enhanced degradation of petroleum hydrocarbon pollutants in vegetated soil. METHODS: The soil was a coastal sandy loam (pH 7.8) which was artificially contaminated with 10 g of No. 2 diesel fuel/kg soil or left uncontaminated. The pots were irrigated with fertilizer and 1% NaCl. The enumerations were carried out in the contaminated and uncontaminated rhizospheres of three trees, kiawe (Prosopis pallida), milo (Thespesia populnea), and kou (Cordia subcordata) and three shrubs, beach naupaka (Scaevola sericea), false sandalwood (Myoporum sandwicense), and oleander (Nerium oleander). Unplanted control soils were included in the experiment. Total bacteria and phenanthrene-degrading bacteria were enumerated on plates. Diesel- and pristane-degrading microorganisms were enumerated by the most-probable-number technique in tissue-culture plates. RESULTS AND DISCUSSION: All four types of microorganisms responded to the rhizosphere of the 6 plants in uncontaminated soil and to the diesel contaminant in unplanted soil. In contaminated rhizospheres, no effect of the plant on the hydrocarbon-degrader numbers was visible. Total bacteria responded more to the plant roots than to the contaminant. The phenanthrene-degrading bacteria and pristane-degrading microorganisms were more influenced by the contaminant than by the plants. The diesel-degrading microorganisms were equally stimulated by the plants and the contaminant. The numbers of hydrocarbon degraders were similar in the contaminated rhizospheres of the three effective plants (kiawe, kou, and milo) and in those of the three ineffective shrubs. CONCLUSION: The results suggest the quality of the rhizodeposition is plant-dependent and governs the type of diesel-degrader populations that will be enhanced by a given plant. RECOMMENDATIONS AND OUTLOOK: In the proposed phytoremediation-benefit model plant roots maintain high levels of hydrocaron degraders in uncontaminated soil. When the root enters a contaminated zone of soil, those hydrocarbon degraders that prefer the contaminant would switch to the contaminant as a carbon source, effectively removing the hydrocarbons. If the root exudates and the contaminant are equally attractive to the hydrocarbon degraders, the contaminant degradaton would be less effective.     

Toxic effects of orimulsion on rainbow trout <Emphasis Type="Italic">oncorhynchus mykiss</Emphasis>

GOAL, SCOPE AND BACKGROUND: Orimulsion (stable emulsion of natural bitumen and water) is a new imported industrial fuel in Lithuania. No data on its toxicity to fish is freely available. The aim of this study was to investigate sensitivity of rainbow trout (Oncorhynchus mykiss) to acute and chronic toxicity of orimulsion and to estimate the Maximum Acceptable Toxicant Concentration (MATC) of orimulsion to fish. METHODS: Laboratory tests were conducted on rainbow trout in all stages of development (embryos, larvae, adults). Acute toxicity (96-hour duration) and long-term (28 or 60-day duration) tests evaluating the wide range spectrum of biological indices were performed under semi-static conditions. RESULTS AND DISCUSSION: Median lethal concentration (96-hour LC50) values and their 95% confidence intervals derived from the tests were: 0.1 (0.09-0.12) to embryos, 0.06 (0.05-0.07) to larvae and 2.22 (2.02-2.43) to adult fish, and 28-day LC50 to adult fish was found to be 0.26 (0.21-0.32) g/l of total orimulsion respectively. The acute toxicity of orimulsion to rainbow trout can be characterised by a narrow zone of toxic effect and a sharp boundary between lethal and sublethal concentrations. The lowest 'safe' or 'no-effect' concentration values of total orimulsion obtained in long-term tests were equal to 0.09 g/l to adult fish, 0.019 g/l to embryos, and 0.0017 g/l to larvae. Proposed value of 'application factor' for orimulsion was found to be equal to 0.03. Since orimulsion has the property to disperse in all water volume, its toxic effect on fish can be characterised by the combined effects of dispersion and water-soluble-fraction. CONCLUSIONS: Maximum Acceptable Toxicant Concentration (MATC) of 0.0017 g/l of total orimulsion to fish was derived from long-term tests based on the most sensitive parameter of rainbow trout larvae (relative mass increase at the end of the test). According to substance toxicity classification accepted for Lithuanian inland waters, orimulsion can be referred to substances of 'moderate' toxicity to fish. RECOMMENDATIONS AND OUTLOOK: For prediction and evaluation of toxic impact of orimulsion accident spills on fish, some recommendations should be given. Since orimulsion has the property to disperse in all water volume during short time periods, the amounts of both spilled orimulsion and polluted water should be ascertained. Once both parameters are known, the real concentration of orimulsion in the water body must be determined. Then this concentration must be compared with 'safe' concentration to fish. By use of 'application factor' 0.03, approximate MATC for other fish species can be estimated when only acute toxicity data (96-hour LC50 value) is available.     

Photodegradation and volatility of pesticides

BACKGROUND AND OBJECTIVES: Among the factors affecting the environmental fate of surface-applied pesticides several biological as well as abiotic factors, such as volatilization and photochemical transformations are of particular interest. Whereas reliable measurement methods and models for estimating direct photodegradation are already available for the compartments of water and atmosphere and individual subprocesses have already been described in detail, there is still a need for further elucidation concerning the key processes of heterogeneous photodegradation of environmental chemicals on surfaces. METHODS: In order to systematically examine the direct and indirect photodegradation of 14C-labeled pesticides on various surfaces and their volatilization behavior, a new laboratory device ('photovolatility chamber') was designed according to US EPA Guideline 161-3. Model experiments under controlled conditions were conducted investigating the impact of different surfaces, i.e. glass, soil dust and radish plants, and environmental factors, i.e. irradiation and atmospheric ozone (O3), on the photodegradation and volatilization of surface-deposited [phenyl-UL-14C]parathion-methyl (PM). RESULTS AND DISCUSSION: Depending on the experimental conditions, parathion-methyl was converted to paraoxon-methyl, 4-nitrophenol, unknown polar products and 14CO2. With respect to the direct photodegradation of PM (experiments without O3), the major products were polar compounds and 14CO2, due to the rapid photochemical mineralization of 4-nitrophenol to 14CO2. Paraoxon-methyl and 4-nitrophenol formation was mainly mediated by the combination of light, O3, and *OH radicals. In radish experiments PM photodegradation was presumably located in the cuticle compartment, which exhibited a sensitized photodegradation, as more unknown products were yielded compared to the glass and soil dust experiments. This could be explained by intensifying the inherent PM degradation in the dark with the same product spectrum. Due to photochemical product formation, which is an antagonistic process to the volatilization of parent compound, the volatilization of unaltered parathion-methyl from each surface generally decreased in the presence of light, particularly in combination with increasing O3 concentrations and *OH radical production rates. CONCLUSION: First results demonstrated that the photovolatility chamber provides a special tool for the systematic evaluation of (a) photodegradation of surface-located pesticide residues, i.e. measuring qualitative aspects of direct and indirect photodegradation together with relative photodegradation rates, and (b) volatilization of pesticides on surfaces by including and optionally varying relevant parameters such as light, atmospheric O3 concentration, surface temperature, air temperature, air flow rate. OUTLOOK: The experimental facility represents an important complement to lysimeter and field studies, in particular for experiments on the volatilization of pesticides using the wind tunnel system. With the photovolatility chamber special experiments on photodegradation, volatilization and plant uptake can be conducted to study key processes in more detail and this will lead to a better understanding of the effects of certain environmental processes on the fate of released agrochemicals contributing to an improved risk assessment.     

Agricultural soil as a potential source of input of organochlorine pesticides into a nearby pond

A study was conducted in the southeastern region of Buenos Aires province, Argentina, to assess an agricultural soil as a potential source of organochlorine (OC) pesticides for the aquatic biota of a nearby pond. We analyzed gamma-HCH (lindane), still in use, and the following banned compounds: DDT, DDE, DDD heptachlor, heptachlor epoxide, aldrin, dieldrin and endrin in soil, bulrush, grass shrimp and fish using gas chromatography with electron capture detection (GC-ECD). Among the OC pesticides, lindane was most dominant in the soil (32.6 ng/g dry wt in the upper and 173.9 ng/g dry wt in the lower horizon) and bulrush (1.9 pg/g lipid). Macrophyte also accumulated high levels of heptachlor epoxide (1.5 pg/g lipid). Heptachlor, although present in the soil, was below the detection limit in all aquatic biota studied. Its primary degradation product, heptachlor epoxide, was found in both soil and biota samples. DDT was found at low levels in the surface soil (6.8 ng/g dry wt), but at higher concentrations in fish (3.6 pg/g lipid), although levels were still below permissible levels for human consumption. Since most of the compounds were found in both soil and aquatic biota, our study suggests that agricultural soil could be an important source for OC pesticides in the nearby pond.     

The Role of a Salt Marsh Plant on Trace Metal Bioavailability in Sediments. Estimation By Different Chemical Approaches * (7 pp)

Goal, Scope and Background The presence or absence of vegetation can condition sediment characteristics. The main aim of this work was to investigate the influence of the sea rush Juncus maritimus on metal (Cd, Cr, Cu, Fe, Mn, Ni, Pb and Zn) availability to organisms living on or in estuarine sediments, from Douro River (NW Portugal), by comparing the characteristics and chemical behaviour of rhizosediments (collected within the plant assemblage) and those of sediment (collected around the plant). In order to evaluate whether and how sediment characteristics condition the role of plants on metal availability, sandy and muddy sediments colonised by J. maritimus were studied in parallel. Methods Metal availability was estimated by enzymatic digestion with pepsin (ED), which may provide an estimate of metal availability to organisms living at estuarine sediments. Nevertheless, since no consensus exists yet on the most suitable methodologies to estimate metal bioavailability in sediments, two more conventional approaches, BCR sequential extraction (SE) and AVS/SEM model, were also used, in parallel, and the information these approaches provided was compared with that provided by ED. Total-recoverable metal contents were determined by atomic absorption spectrophotometry after sediment digestion using a high-pressure microwave system. Results and Discussion Plants could concentrate metals around its roots and rhizomes. In addition, they were capable of oxidizing (release of oxygen by the roots) the anaerobic medium surrounding their roots in muddy sediment (reducing AVS). As sulphide oxidation renders metals (Cd, Cu, Ni, Pb and Zn) into more soluble forms, according to the AVS/SEM model, metals from muddy sites would be more available in rhizosediment than in sediment. The SE approach led to a similar conclusion. Nevertheless, the results provided by ED pointed at opposite conclusion, particularly for Cd and Zn, indicating less availability at rhizosediments than in the surrounding sediment. ED results were interpreted as a consequence of an enrichment of the rhizosediment in organic ligands exuded by the roots or liberated by dead plants. The effect of complexation of metals by organic compounds, which ED could not decompose/dissolve, seemed to overcome that caused by sediment oxidation. In general, a comparison of the information about metal availability by ED, SE, AVS/SEM, showed that it did not always match and in few cases it was even contradictory. Conclusion and Outlook Therefore, a thorough evaluation of the metal availability in sediments requires a combination of different chemical approaches, so as to take into consideration differences in ways of organism exposure (interstitial water and/or ingestion of sediment particles). - * The basis of this peer-reviewed paper is a presentation at the 9th FECS Conference on 'Chemistry and Environment', 29 August to 1 September 2004, Bordeaux, France.     

Acetochlor as a soil pollutant

Acetochlor is a widely used herbicide all over the world. Similarly to other organic pollutants, the environmental fate of the acetochlor is strongly related to its adsorption properties. Static adsorption equilibrium measurements were carried out at 25 degrees C on different types of Hungarian soils characterized by varying amounts of organic matter and pH values. Isotherms obtained under different conditions, as well as on various soils, exhibit a similar shape, thus indicating a two-step adsorption process. The plots cannot be interpreted according to the classes of isotherms suggested by Giles. The adsorption coefficients (K) were estimated from the initial slope of the curves. These values were determined not only by the type of the soil, but also by the composition of the aqueous media. The organic matter adsorption coefficients (Kom) were also calculated and they were approximately identical for soils of high organic matter. Due to the low value of the adsorption coefficients, the acetochlor is a rather mobile pollutant of the soil posing a potential danger to the aquatic environment. For soils with high organic content, the Kom values are similar to each other and, due to the significant coverage of the inorganic surfaces, the adsorption is controlled by the solute-organic substance interactions. The adsorption of weakly polar compounds, however, is remarkable even on those soils where the organic content is low. In this case, the binding is governed by the solute-inorganic surface interactions. This conclusion is nicely proved by the adsorption of the acetochlor on quartz. According to our hypothesis, the second part of the adsorption step is controlled by the solute-adsorbed solute interactions. The role of the organic matter in this region of the isotherm is probably negligible. As the organic matter content of the soils plays an important role in the acetochlor adsorption, humic substances must have a strong influence upon the transport of this compound. Experiments to obtain adsorption isotherms of further pesticides and the development of a quantitative model are in progress.     

The occurrence of disinfection by-products in the drinking water of Athens,Greece

Application of chlorination for the disinfection of drinking water results in the formation of a wide range of organic compounds, called disinfection by-products (DBPs), which occur due to the reaction of chlorine with natural organic materials. The occurrence of DBPs was studied in samples from four drinking-water treatment plants (WTPs) and from the distribution network of Athens, Greece. Twenty-four compounds, which belong to different categories of DBPs, were monitored, including trihalomethanes (THMs), haloacetic acids (HAAs), haloacetonitriles (HANs), haloketones (HAKs), chloral hydrate (CH) and chloropicrin (CP). Sampling was performed monthly for a period of two years, from three different points at each WTP and from eight points atthe distribution network. Samples were analyzed by GC-ECD methods, which included pretreatment with liquid-liquid extraction for volatile DBPs and acidic methanol esterification for HAAs. The results of the analyses have shown the presence of disinfection by-products belonging to all categories studied in all water samples collected after prechlorination. The major categories of DBPs detected were THMs and HAAs, while the other volatile DBPs occurred at lower concentrations. The concentrations of DBPs did not in any case exceed the maximum contaminant levels (MCL) set by USEPA and WHO. However, monitoring these compounds needs to be continued, because their levels could increase due to changes in the quality of water entering the water treatment plants. Reduction of the concentrations of DBPs could be achieved by optimization of the chlorination conditions, taking into account the effect of time. Moreover, research on alternative disinfection methods (e.g. ozone, chlorine dioxide, chloramines) and their by-products should be conducted to evaluate their applicability in the case of the drinking water of Greece.     

Water technology for specific water usage

BACKGROUND: Water is the basis for life and culture. In addition to the availability of water its quality has become a major issue in industrialized areas and in developing countries as well. Water usage has to be seen as part of the hydrological cycle. As a consequence water management has to be sustainable. The aim of the contribution is to give water usage oriented quality criteria and to focus on the technical means to achieve them. MAIN FEATURES: Water is used for many purposes, ranging from drinking and irrigation to a broad variety of technical processes. Most applications need specific hygienic, chemical and/or physical properties. RESULTS: To meet these demands separation and reaction principles are applied. The reuse of water and the application of water treatment with little or no waste and by-product formation is the way to go. Membrane separation and advanced oxidation including catalytic reactions are promising methods that apply natural processes in sustainable technical performance. Thus elimination of specific water constituents (e.g. salts and metals, microorganisms) and waste water cleaning (e.g. pollutants, nutrients and organic water) can be done efficiently. OUTLOOK: Learning from nature and helping nature with appropriate technology is a convincing strategy for sustainable water management.