Aquatic macrophytes potential for the simultaneous removal of heavy metals (Buenos Aires, Argentina)

Heavy metal removal from water has been approached by using different technologies. Phytotechnologies, with an increasing development during the last two decades, involve using plants for metal removal. Three autochthonous floating macrophytes, common in pampean shallow lakes (Argentina), Pista stratiotes, Spirodela intermedia and Lemna minor were used in laboratory experiences for the simultaneously removal of several heavy metals (Fe, Cu, Zn, Mn, Cr and Pb) resulting from anthropogenic activity, in order to simulate a naturally polluted environment. The experiences were performed for different concentrations of metals along 15 days. High metal removal percentages were obtained for the 3 species and metals. L. minor did not survive the conditions of the experiment. High correlation between the final water and the macrophytes metal concentration was obtained, deviations were due to PbCrO(4) precipitation. The rate of metal uptake was dependent on the metal concentration for the 3 species studied.     

Surfactants in sludge-amended agricultural soils: a review

Surfactants are included in different detergent formulations and are one of the most ubiquitous and important families of organic compounds. Although the generic term applies to a great number of products, 80% of their demand is covered by only ten types of compounds. The global surfactant market volume size is more than 18 million tons per year. Large quantities of surfactants are continuously released into the environment, where they can or cannot be degraded depending on their structure. The alkylbenzenesulphonate (LAS) is the most widely used surfactant. LAS can be degraded under aerobic conditions but is persistent in the environment under anaerobic conditions. Surfactants may enter the terrestrial environment through several routes, with the use of sewage sludge as fertiliser on agricultural land being by far the most important. High concentrations of surfactants and their degradation products may affect the biota. On the other hand, due to their amphiphilic nature, surfactants may interact both with inorganic as well as organic contaminants affecting their bioavailability.     

Chemical depolymerisation of PET complex waste: hydrolysis vs. glycolysis

The huge increase in the generation of post-consumer plastic waste has produced a growing interest in eco-efficient strategies and technologies for their appropriate management and recycling. In response to this, PROQUIPOL Project is focused on developing, optimizing and adapting feedstock recycling technologies as an alternative for management for the treatment of complex plastic waste. Among the different plastic wastes studied, PROQUIPOL Project is working on providing a suitable treatment to the highly colored and complex multilayered post-consumer waste fractions of polyethylene terephthalate (PET) by chemical depolymerisation methods. Glycolysis and alkali hydrolysis processes have been studied with the aim of promoting the transformation of PET into the bis(2-hydroxyethyl) terephthalate monomer and terephthalic acid, respectively. In both cases operational conditions such as temperature, reaction time, catalyst to PET rate and solvent to PET rate have been considered to optimize product yield, achieving values near to 90 % and monomer purities over 95 % in both processes. This paper presents results obtained for each treatment as well as a simplified comparison of technical, economic and environmental issues.     

Assessing Satellite and Ground‐Based Potential Evapotranspiration for Hydrologic Applications in the Colorado River Basin

This study evaluates a remotely sensed and two ground‐based potential evapotranspiration (PET) products for hydrologic application in the Upper Colorado River Basin (UCRB). The remotely sensed Moderate Resolution Imaging Spectroradiometer product (MODIS‐PET) is a continuous, daily time series with 250 m resolution derived using the Priestley‐Taylor (P‐T) equation. The MODIS‐PET is evaluated against regional flux tower data as well as a synthetic pan product (Epan; 0.125°, daily) derived from the North American Land Data Assimilation System (NLDAS) and a Hargreaves PET derived from DAYMET variables (DAYMET‐PET; 1 km, daily). Compared to point‐scale PET computed using regional flux tower data, the MODIS‐PET had lower errors, with RMSE values ranging from 2.24 to 2.85 mm/day. Epan RMSE values ranged from 3.70 to 3.76 mm/day and DAYMET‐PET RMSE values ranged from 3.55 to 4.58 mm/day. Further investigation showed biases in temperature and radiation data contribute to uncertainty in the MODIS‐PET values, while bias in NLDAS temperature, downward shortwave (SW↓), and downward longwave (LW↓) propagate in the Epan estimates. Larger discrepancies between methods were observed in the warmer, drier regions of the UCRB, however, the MODIS‐PET was more responsive to landcover transitions and better captured basin heterogeneity. Results indicate the satellite‐based MODIS product can serve as a viable option for obtaining spatial PET values across the UCRB.     

Polymer nanoparticles containing essential oils: new options for mosquito control

Environmental Science and Pollution Research - Mosquitoes (Diptera: Culicidae) are vectors of important parasites and pathogens causing death, poverty and social disability worldwide. The overuse...     

Hydrologic Resilience from Summertime Fog and Recharge: A Case Study for Coho Salmon Recovery Planning

Fog and low cloud cover (FLCC) and late summer recharge increase stream baseflow and decrease stream temperature during arid Mediterranean climate summers, which benefits salmon especially under climate warming conditions. The potential to discharge cool water to streams during the late summer (hydrologic capacity; HC) furnished by FLCC and recharge were mapped for the 299 subwatersheds ranked Core, Phase 1, or Phase 2 under the National Marine Fisheries Service Recovery Plan that prioritized restoration and threat abatement action for endangered Central California Coast Coho Salmon evolutionarily significant unit. Two spatially continuous gridded datasets were merged to compare HC: average hrs/day FLCC, a new dataset derived from a decade of hourly National Weather Satellite data, and annual average mm recharge from the USGS Basin Characterization Model. Two use‐case scenarios provide examples of incorporating FLCC‐driven HC indices into long‐term recovery planning. The first, a thermal analysis under future climate, projected 65% of the watershed area for 8–19 coho population units as thermally inhospitable under two global climate models and identified several units with high resilience (high HC under the range of projected warming conditions). The second use case investigated HC by subwatershed rank and coho population, and identified three population units with high HC in areas ranked Phase 1 and 2 and low HC in Core. Recovery planning for cold‐water fish species would benefit by including FLCC in vulnerability analyses.     

Critical Review of Exposure and Effects: Implications for Setting Regulatory Health Criteria for Ingested Copper

Environmental Management - Decades of study indicate that copper oral exposures are typically not a human health concern. Ingesting high levels of soluble copper salts can cause acute...     

Per- and polyfluoroalkyl substances and obesity,type 2 diabetes and non-alcoholic fatty liver disease: a review of epidemiologic findings

Abstract

Per- and polyfluoroalkyl substances, a group of fluoro-surfactants widely detected in the environment, wildlife, and humans, have been linked to adverse health effects. A growing body of literature has addressed their effects on obesity, diabetes and non-alcoholic fatty liver disease/non-alcoholic steatohepatitis. This review summarizes the brief historical use and chemistry of per- and polyfluoroalkyl substances, routes of human exposure, as well as the epidemiologic evidence for associations between exposure to per- and polyfluoroalkyl substances and the development of obesity, diabetes and non-alcoholic fatty liver disease/non-alcoholic steatohepatitis. We identified 22 studies on obesity and 32 studies on diabetes, while only 1 study was found for non-alcoholic fatty liver disease/non-alcoholic steatohepatitis by searching PubMed for human studies. Approximately two-third of studies reported positive associations between per- and polyfluoroalkyl substances exposure and the prevalence of obesity and/or type 2 diabetes. Causal links between per- and polyfluoroalkyl substances and obesity, diabetes and non-alcoholic fatty liver disease/non-alcoholic steatohepatitis, however, require further large-scale prospective cohort studies combined with mechanistic laboratory studies to better assess these associations.     

The effects of elevated carbon dioxide levels on a Vibrio sp. isolated from the deep-sea

Introduction

The effect of oceanic CO₂ sequestration was examined exposing a deep-sea bacterium identified as Vibrio alginolyticus (9NA) to elevated levels of carbon dioxide and monitoring its growth at 2,750 psi (1,846 m depth).

Findings

The wild-type strain of 9NA could not grow in acidified marine broth below a pH of 5. The pH of marine broth did not drop below this level until at least 20.8 mM of CO₂ was injected into the medium. 9NA did not grow at this CO₂ concentration or higher concentrations (31.2 and 41.6 mM) for at least 72 h. Carbon dioxide at 10.4 mM also inhibited growth, but the bacterium was able to recover and grow. Exposure to CO₂ caused the cell to undergo a morphological change and form a dimple-like structure. The membrane was also damaged but with no protein leakage.     

Evidence for short-range transport of atmospheric mercury to a rural,inland site

Atmospheric mercury (Hg) species, including gaseous elemental mercury (GEM), reactive gaseous mercury (RGM) and particulate-bound mercury (Hg_p), were monitored near three sites, including a cement plant (monitored in 2007 and 2008), an urban site and a rural site (both monitored in 2005 and 2008). Although the cement plant was a significant source of Hg emissions (for 2008, GEM: 2.20 ± 1.39 ng m^?3, RGM: 25.2 ± 52.8 pg m^?3, Hg_p 80.8 ± 283 pg m^?3), average GEM levels and daytime average dry depositional RGM flux were highest at the rural site, when all three sites were monitored sequentially in 2008 (rural site, GEM: 2.37 ± 1.26 ng m^?3, daytime RGM flux: 29 ± 40 ng m^?2 day^?1). Photochemical conversion of GEM was not the primary RGM source, as highest net RGM gains (75.9 pg m^?3, 99.0 pg m^?3, 149 m^?3) occurred within 3.0–5.3 h, while the theoretical time required was 14–23 h. Instead, simultaneous peaks in RGM, Hg_p, ozone (O₃), nitrogen oxides, and sulfur dioxide in the late afternoon suggested short-range transport of RGM from the urban center to the rural site. The rural site was located more inland, where the average water vapor mixing ratio was lower compared to the other two sites (in 2008, rural: 5.6 ± 1.4 g kg^?1, urban: 9.0 ± 1.1 g kg^?1, cement plant: 8.3 ± 2.2 g kg^?1). Together, these findings suggested short-range transport of O₃ from an urban area contributed to higher RGM deposition at the rural site, while drier conditions helped sustain elevated RGM levels. Results suggested less urbanized environments may be equally or perhaps more impacted by industrial atmospheric Hg emissions, compared to the urban areas from where Hg emissions originated.