Workstation design in carpet hand-weaving operation: guidelines for prevention of musculoskeletal disorders.

Carpet weavers suffer from musculoskeletal problems mainly attributed to poor working postures. Their posture is mostly constrained by the design of workstations. This study was conducted to investigate the effects of 2 design parameters (weaving height and seat type) on postural variables and subjective experience, and to develop guidelines for workstation adjustments. At an experimental workstation, 30 professional weavers worked in 9 different conditions. Working posture and weavers' perceptions were measured. It was shown that head, neck and shoulder postures were influenced by weaving height. Both design parameters influenced trunk and elbows postures. The determinant factor for weavers' perception on the neck, shoulders and elbows was found to be weaving height, and on the back and knees it was seat type. Based on the results, the following guidelines were developed: (a) weaving height should be adjusted to 20 cm above elbow height; (b) a 10 degrees forward-sloping high seat is to be used at weaving workstations.     

226Ra concentration in the teeth of habitants of areas with high level of natural radioactivity in Ramsar

The level of natural radiation in some regions of Ramsar, a northern coastal city of Iran, is known to be among the highest levels of natural radiation in the world. 226Ra existing in high concentrations in the soil of this region is washed by underground water and transferred to the surface. In this way, 226Ra enters the food chain of residents and substitutes within the hard body tissues of humans. 226Ra is one of the so-called bone seekers as its metabolic processes in the human body are similar to calcium and remains in hard tissues of body because of its long half-life, and being an alpha emitter causes dangerous effects on human health. The purpose of this study is to determine the concentration of 226Ra in the teeth of residents of these high-level natural radiation areas, compared with a control group. Thirteen teeth in five groups were studied as the case group and thirteen teeth in five corresponding control groups were inspected. The mean values of the activity of 226Ra in the case group and in the control group were 0.32 and 0.18mBqg(-1), respectively.     

Quantitative analysis and sorption of cadmium in environmental samples with a functionalized synthetic polymer

Quantitative analysis of cadmium in environmental samples was achieved with a polymeric sorbent synthesized by copolymerization of N,N-dimethylacrylamide and allyl glycidyl ether/iminodiacetic acid as chelating monomers with N,N′-methylenebisacrylamide as cross-linker. The polymer was characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, elemental analysis, and scanning electron microscopy. The sorption capacity of the functionalized sorbent was 70 mg g^?1. The equilibrium sorption data of Cd(II) on polymeric sorbent were analyzed using Langmuir, Freundlich, Temkin, and Redlich–Peterson models. Based on equilibrium adsorption data, the constants at pH 4.2 and 20 °C were determined for the first three as 0.33 (L mg^?1), 17.5 (mg g^?1) (L mg^?1)^1/n, and 12.9 (J mol^?1). Recovery of 94% of the metal ion was obtained with 0.5 mol L^?1 nitric acid as an eluting agent.     

Source apportionment and health risk assessment of potentially toxic elements in road dust from urban industrial areas of Ahvaz megacity,Iran

This study investigates the occurrence and spatial distribution of potentially toxic elements (PTEs) (Hg, Cd, Cu, Mo, Pb, Zn, Ni, Co, Cr, Al, Fe, Mn, V and Sb) in 67 road dust samples collected from urban industrial areas in Ahvaz megacity, southwest of Iran. Geochemical methods, multivariate statistics, geostatistics and health risk assessment model were adopted to study the spatial pollution pattern and to identify the priority pollutants, regions of concern and sources of the studied PTEs. Also, receptor positive matrix factorization model was employed to assess pollution sources. Compared to the local background, the median enrichment factor values revealed the following order: Sb > Pb > Hg > Zn > Cu > V > Fe > Mo > Cd > Mn > Cr ≈ Co ≈ Al ≈ Ni. Statistical results show that a significant difference exists between concentrations of Mo, Cu, Pb, Zn, Fe, Sb, V and Hg in different regions (univariate analysis, Kruskal–Wallis test p < 0.05), indicating the existence of highly contaminated spots. Integrated source identification coupled with positive matrix factorization model revealed that traffic-related emissions (43.5%) and steel industries (26.4%) were first two sources of PTEs in road dust, followed by natural sources (22.6%) and pipe and oil processing companies (7.5%). The arithmetic mean of pollution load index (PLI) values for high traffic sector (1.92) is greater than industrial (1.80) and residential areas (1.25). Also, the results show that ecological risk values for Hg and Pb in 41.8 and 9% of total dust samples are higher than 80, indicating their considerable or higher potential ecological risk. The health risk assessment model showed that ingestion of dust particles contributed more than 83% of the overall non-carcinogenic risk. For both residential and industrial scenarios, Hg and Pb had the highest risk values, whereas Mo has the lowest value.     

Solomon versus selective fetoscopic laser photocoagulation for twin-twin transfusion syndrome: A systematic review and meta-analysis

This meta-analysis aims to compare the perinatal outcome of twin-twin transfusion syndrome (TTTS) pregnancies undergoing selective versus vascular equator (Solomon) fetoscopic laser photocoagulation (FLP). We performed a systematic search in PubMed and Web of Science from inception up to 25 July 2021. Studies comparing the Solomon and selective techniques of FLP for treatment of TTTS pregnancies were eligible. Random-effects or fixed-effect models were used to pool standardized mean differences (SMD) and log odds ratio. Seven studies with a total of 1664 TTTS pregnancies (n = 671 undergoing Solomon and n = 993 selective techniques) were included. As compared to the selective FLP, Solomon was associated with a lower risk of recurrent TTTS compared to the selective technique (Log odds ratio [OR]: −1.167; 95% credible interval [CrI]: −2.01, −0.33; p = 0.021; I²: 67%). In addition, Solomon was significantly associated with a higher risk of placental abruption than the selective technique (Log [OR]: 1.44; 95% CrI: 0.45, 2.47; p = 0.012; I²: 0.0%). Furthermore, a trend for the higher risk of preterm premature rupture of membranes was observed among those undergoing Solomon (Log [OR]: 0.581; 95% CrI: −0.43, 1.49; p = 0.131; I²: 17%). As compared to selective FLP, the Solomon technique for TTTS pregnancies is associated with a significantly lower recurrence of TTTS; however, it significantly increases the risk of placental abruption.     

A Comparative Study on the Mechanical and Physical Properties of Plywood Panels Prepared by Chitosan as Bio-Adhesive

Journal of Polymers and the Environment - This study aims to make environment-friendly plywood panels acceptable in terms of both mechanical and physical properties using chitosan as a natural...     

Evaluation of Aspergillus niger and Penicillium simplicissimum for their ability to leach Zn–Ni–Cu from waste mobile phone printed circuit boards

Journal of Material Cycles and Waste Management - In this research, Zn, Ni, and Cu recovery from mobile phone printed circuit boards was investigated. The initial pH and pulp density using...     

The boosted activity of AgI/BiOI nanocatalyst: a RSM study towards Eriochrome Black T photodegradation

Environmental Science and Pollution Research - Nowadays, critical environmental pollution needs some novel, simple, effective, and cost-effective catalysts with high efficiency in the visible...