Environmental quality of mussel farms in the Vigo estuary: pollution by PAHs, origin and effects on reproduction

This work analyzes the influence of environmental and physiological parameters on PAHs accumulation in cultured mussels. Lipid content and reproductive stage are directly related with PAHs accumulation pattern. We observed a rapid accumulation and depuration of PAHs, mainly during periods of nutrients accumulation, spawns and gonadic restorations. Correlations between PAHs accumulation and physiological status indicate when mussels are more susceptible to adverse effects of these pollutants. A positive correlation between mutagenic congener’s accumulation and occurrence of gonadic neoplastic disorders is shown for the first time in mussels. Molecular indices were used to identify the origin of hydrocarbons accumulated by Mytilus, showing a chronic pyrolytic pollution and pollutant episodes by petrogenic sources and biomass combustion in the studied area. Multivariate analysis suggests the possibility of including physiological parameters of sentinel organisms in environmental biomonitoring programs, mainly in aquaculture areas, taking into account their two aspects: farms productivity and human food safety.     

Semifield assessment of the runoff potential and environmental risk of the parasiticide drug ivermectin under Mediterranean conditions

Introduction  

The antiparasitic ivermectin is of particular concern to regulatory agencies. Ivermectin can reach the environment through the direct emission of dung from livestock on pasture and via manure application on agricultural lands.     

Carbon dioxide capture from combustion flue gases with a calcium oxide chemical loop. Experimental results and process development

Post-combustion carbonate looping processes are based on the capture of carbon dioxide from the flue gases of an existing power plant in a circulating fluidized bed reactor (CFB) of calcium oxide (the carbonator) particles. The calcination of calcium carbonate in a new oxy-fired CFBC power plant regenerates the sorbent (calcium oxide particles) and obtains high purity carbon dioxide. This communication presents experimental results from a small test facility (30 kWt) operated in continuous mode using two interconnected CFB reactors as carbonator and calciner. Capture efficiencies between 70 and 97% have been obtained under realistic flue gas conditions in the carbonator reactor (temperatures around 650 °C). The similarity between process conditions and those existing in CFBC power plants should allow a rapid scaling up of this technology. The next steps for this process development are also outlined.     

Consequence analysis by means of characteristic curves to determine the damage to buildings from bursting spherical vessels

Since the damage suffered by buildings as a consequence of explosions usually affect the people inside them, it is important to take it into account when performing consequence analysis. The aim of this paper is to provide a methodology to estimate consequences to buildings from pressure waves produced by spherical vessel burst. This is done by combining characteristic overpressure–impulse–distance curves [González Ferradás, E., Diaz Alonso, F., Sanchez Perez, J.F., Miñana Aznar, A., Ruiz Gimeno, J. and Martinez Alonso, J., 2006, Characteristic overpressure–impulse–distance curves for vessel burst, Process Safety Progress, 25(3): 250–254] with PROBIT equations. The main advantage of this methodology is that it allows an overview of all the magnitudes involved, as damage is shown in the same graph as the overpressure, impulse and distance. In this paper diagrams and equations are presented to determine minor damage to buildings (broken windows, displacement of doors and window frames, tile displacement, etc.), major structural damage (cracks in walls, collapse of some walls) and collapse (the damage is so extensive that the building is partially or totally demolished).     

Uphill permeation of Cr(VI) using Hostarex A327 as ionophore by membrane-solvent extraction processing

The transport of chromium by the emulsion pertraction technology (EPERT) using Hostarex A327 (tertiary amine) as a carrier has been investigated. The permeation of the metal is studied as a function of various experimental variables: hydrodynamic conditions, concentration of Cr(VI) and HCl in the source phase, carrier concentration and diluent in the organic phase, strippant concentration in the stripping phase and support characteristics of the membrane. The mass transfer coefficient and the thickness of the aqueous source boundary layer were estimated from the experimental data. Furthermore, the selectivity of the Hostarex A327-bases EPERT towards different metal ions and the behaviour of the system against other carriers are presented.     

Assessment of toxicity of a glyphosate-based formulation using bacterial systems in lake water

A new Aeromonas bioassay is described to assess the potential harmful effects of the glyphosate-based herbicide, Roundup^®, in the Albufera lake, a protected area near Valencia. Viability markers as membrane integrity, culturability and β-galactosidase production of Aeromonas caviae were studied to determine the influence of the herbicide in the bacterial cells. Data from the multifactor analysis of variance test showed no significant differences (P > 0.05) between A. caviae counts of viability markers at the studied concentrations (0, 50 and 100 mg l⁻¹ of glyphosate).

The effects of Roundup^® on microbial biota present in the lake were assessed by measuring the number of indigenous mesophilic Aeromonas in presence of different amounts of the herbicide at 0, 50 and 100 mg l⁻¹ of glyphosate. In samples containing 50 and 100 mg l⁻¹ of glyphosate a significant (P < 0.05) increase in Aeromonas spp. counts and accompanying flora was observed.

The acute toxicity of Roundup^® and of Roundup^® diluted with Albufera lake water to Microtox^® luminescent bacterium (Vibrio fischeri) also was determined. The EC₅₀ values obtained were 36.4 mg l⁻¹ and 64.0 mg l⁻¹ of glyphosate respectively. The acidity (pH 4.5) of the herbicide formulation was the responsible of the observed toxicity.     

Characteristic overpressure–impulse–distance curves for the detonation of explosives, pyrotechnics or unstable substances

A number of models have been proposed to calculate overpressure and impulse from accidental industrial explosions. When the blast is produced by explosives, pyrotechnics or unstable substances, the TNT equivalent model is widely used. From the curves given by this model, data are fitted to obtain equations showing the relationship between overpressure, impulse and distance. These equations, referred to here as characteristic curves, can be fitted by means of power equations, which depend on the TNT equivalent mass. Characteristic curves allow determination of overpressure and impulse at each distance.     

Experimental validation of in situ CO2 capture with CaO during the low temperature combustion of biomass in a fluidized bed reactor

A novel concept for capturing CO₂ from biomass combustion using CaO as an active solid sorbent of CO₂ is discussed and experimentally tested. According to the CaO/CaCO₃ equilibrium, if a fuel could be burned at a sufficiently low temperature (below 700 °C) it would be possible to capture CO₂ “in situ” with the CaO particles at atmospheric pressure. A subsequent step involving the regeneration of CaCO₃ in a calciner operating at typical conditions of oxyfired-circulating fluidized combustion would deliver the CO₂ ready for purification, compression and permanent geological storage. Several series of experiments to prove this concept have been conducted in a 30 kW interconnected fluidized bed test facility at INCAR-CSIC, made up of two interconnected circulating fluidized bed reactors, one acting as biomass combustor-carbonator and the other as air-fired calciner (which is considered to yield similar sorbent properties than those of an oxyfired calciner). CO₂ capture efficiencies in dynamic tests in the combustor-carbonator reactor were measured over a wide range of operating conditions, including different superficial gas velocities, solids circulation rates, excess air above stoichiometric, and biomass type (olive pits, saw dust and pellets). Biomass combustion in air is effective at temperatures even below the 700 °C, necessary for the effective capture of CO₂ by carbonation of CaO. Overall CO₂ capture efficiencies in the combustor-carbonator higher than 70% can be achieved with sufficiently high solids circulation rates of CaO and solids inventories. The application of a simple reactor model for the combined combustion and CO₂ capture reactions allows an efficiency factor to be obtained from the dynamic experimental test that could be valuable for scaling up purposes.     

Low level radioactivity measurements with phoswich detectors using coincident techniques and digital pulse processing analysis

A new system has been developed for the detection of low radioactivity levels of fission products and actinides using coincidence techniques. The device combines a phoswich detector for alpha/beta/gamma-ray recognition with a fast digital card for electronic pulse analysis. The phoswich can be used in a coincident mode by identifying the composed signal produced by the simultaneous detection of alpha/beta particles and X-rays/gamma particles. The technique of coincidences with phoswich detectors was proposed recently to verify the Nuclear Test Ban Treaty (NTBT) which established the necessity of monitoring low levels of gaseous fission products produced by underground nuclear explosions. With the device proposed here it is possible to identify the coincidence events and determine the energy and type of coincident particles. The sensitivity of the system has been improved by employing liquid scintillators and a high resolution low energy germanium detector. In this case it is possible to identify simultaneously by alpha/gamma coincidence transuranic nuclides present in environmental samples without necessity of performing radiochemical separation. The minimum detectable activity was estimated to be 0.01 Bq kg(-1) for 0.1 kg of soil and 1000 min counting.