A SYSTEMATIC ANALYSIS OF THE CONSTRAINTS TO URBAN STREAM ENHANCEMENTS1

ABSTRACT: The environment surrounding urban streams imposes constraints upon stream enhancement projects. Constraints include bridges, culverts, highways, sewer and water lines, lack of easements, and other floodplain structures. The consequences of failure of these infrastructure constraints can be significant and should be considered in the design process. Fault tree analysis provides a systematic technique for analyzing the interactions of events that could lead to infrastructure failure. A case study of a stream in Pittsburgh, Pennsylvania, shows that fault tree analysis can effectively model the interactions between the stream system and the infrastructure constraints and predict the most likely modes of failure. In addition, the relative success of alternative designs and failure mitigation techniques can be assessed using this analysis tool, lending insight into the urban stream enhancement design process. The method could also provide justification in the design permitting process and input for risk assessment.     

Scientific Gear as a Vector for Non-Native Species at Deep-Sea Hydrothermal Vents

The fauna of deep-sea hydrothermal vents are among the most isolated and inaccessible biological communities on Earth. Most vent sites can only be visited by subsea vehicles, which can and do move freely among these communities. Researchers assume individuals of the regionally homogeneous vent fauna are killed by the change in hydrostatic pressure the animals experience when the subsea vehicles, which collected them, rise to the surface. After an Alvin dive, we found 38 apparently healthy individuals of a vent limpet in a sample from a hydrothermally inactive area. Prompted by our identification of these specimens as Lepetodrilus gordensis, a species restricted to vents 635 km to the south of our dive site, we tested whether they were from a novel population or were contaminants from the dive made 36 h earlier. The 16S gene sequences, morphology, sex ratio, bacterial colonies, and stable isotopes uniformly indicated the specimens came from the previous dive. We cleaned the sampler, but assumed pressure changes would kill any organisms we did not remove and that the faunas of the 2 areas were nearly identical and disease-free. Our failure to completely clean the gear on the subsea vehicle meant we could have introduced the species and any diseases it carried to a novel location. Our findings suggest that the nearly inaccessible biological communities at deep-sea vents may be vulnerable to anthropogenic alteration, despite their extreme physical conditions.     

Characteristics of bicycle crashes among children and the effect of bicycle helmets

Abstract

Objective: Focusing on children (0–17?years), this study aimed to investigate injury and accident characteristics for bicyclists and to evaluate the use and protective effect of bicycle helmets.

Method: This nationwide Swedish study included children who had visited an emergency care center due to injuries from a bicycle crash. In order to investigate the causes of bicycle crashes, data from 2014 to 2016 were analyzed thoroughly (n?=?7967). The causes of the crashes were analyzed and categorized, focusing on 3 subgroups: children 0–6, 7–12, and 13–17?years of age. To assess helmet effectiveness, the induced exposure approach was applied using data from 2006 to 2016 (n?=?24,623). In order to control for crash severity, only bicyclists who had sustained at least one Abbreviated Injury Scale (AIS) 2+ injury (moderate injury or more severe) in body regions other than the head were included.

Results: In 82% of the cases the children were injured in a single-bicycle crash, and the proportion decreased with age (0–6: 91%, 7–12: 84%, 13–17: 77%). Of AIS 2+ injuries, 8% were head injuries and 85% were injuries to the extremities (73% upper extremities and 13% lower extremities). Helmet use was relatively high up to the age of 10 (90%), after which it dropped. Helmets were much less frequently used by teenagers (14%), especially girls. Consistently, the share of head injuries increased as the children got older. Bicycle helmets were found to reduce all head injuries by 61% (95% confidence interval [CI], 10: +/? 10%) and AIS 2+ head injuries by 68% (95% CI, 12: +/? 12%). The effectiveness in reducing face injuries was lower (45% CI +/? 10% for all injuries and 54% CI +/? 32% for AIS2+ injuries).

Conclusions: This study indicated that bicycle helmets effectively reduce injuries to the head and face. The results thus point to the need for actions aimed at increasing helmet use, especially among teenagers. Protective measures are necessary to further reduce injuries, especially to the upper extremities.     

On the Curing of ESO/MTHPA/DEH 35 and ESO/MTHPA/DEH 35/TIN

Journal of Polymers and the Environment - Epoxidized soybean oil (ESO) compounds were cured with methyl tetrahydrophthalic anhydride (MTHPA) as hardener and 2,4,6-tris (dimethylaminomethyl) phenol...     

Individual and combined effects of Ca/Mg ratio and water on trait expression in Mimulus guttatus

Low Ca/Mg ratios (a defining component of serpentine soils) and low water environmental conditions often co-occur in nature and are thought to exert strong selection pressures on natural populations. However, few studies test the individual and combined effects of these environmental factors. We investigated the effects of low Ca/Mg ratio and low water availability on plant leaf, stem, stolon, and floral traits of Mimulus guttatus, a bodenvag species, i.e., a species that occurs in serpentine and non-serpentine areas. We quantified genetic variation and genetic variation for plasticity for these leaf, stem, stolon, and floral traits at three hierarchical levels: field-habitat type, population, and family, and we evaluated the relative importance of local adaptation and plasticity. We chose two populations and 10 families per population from four distinct field "habitat types" in northern California: high Ca/Mg ratio (non-serpentine) and season-long water availability, high Ca/Mg ratio and seasonally drying, low Ca/Mg ratio (serpentine) and season-long water availability, and low Ca/Mg ratio and seasonally drying. Seedlings were planted into greenhouse treatments that mimicked the four field conditions. We only detected genetic variation for stem diameter and length of longest leaf at the field-habitat level, but we detected genetic variation at the family level for nearly all traits. Soil chemistry and water availability had strong phenotypic effects, alone and in combination. Our hypothesis of an association between responses to low water levels and low Ca/Mg ratio was upheld for length of longest leaf, stem diameter, corolla width, and total number of reproductive units, whereas for other traits, responses to Ca/Mg ratio and low water were clearly independent. Our results suggest that traits may evolve independently from Ca/Mg ratios and water availability and that our focal traits were not simple alternative measures of vigor. We found genetic variation for plasticity both at the field-habitat type and family levels for half of the traits studied. Phenotypic plasticity and genetic variation for plasticity appear to be more important than local adaptation in the success of these M. guttatus populations found across a heterogeneous landscape in northern California. Phenotypic plasticity is an important mechanism maintaining the broad ecological breadth of native populations of M. guttatus.     

Preliminary evaluation of septic-system absorption-field architecture types in a profile-limited soil

Managing household wastewater is an issue that affects hundreds of thousands of people in rural communities nationwide, many of whom rely on septic systems as their primary means of household wastewater disposal. Septic system absorption field products with architectures quite different from traditional pipe-and-gravel systems are being installed in many states with variances from initial design specifications. The objective of this study was to evaluate the performance, as measured by the in-product height of stored solution, of four differing absorption-field product architecture types in a profile-limited soil that was loaded at the maximum allowable rate based on soil morphology. Five chamber, two gravel-less pipe, two polystyrene aggregate, and four pipe-and-gravel systems were installed in a profile-limited, Captina silt loam soil (fine-silty, siliceous, active, mesic Typic Fragiudult) and dosed with raw effluent at rates determined by current State of Arkansas regulations via individual peristaltic pumps. Free-solution monitoring ports were installed within each product, where the depth to free solution was measured periodically and used to evaluate product performance. Data collected from January through August 2009 indicated that preliminary system performance was unaffected by product architecture type. All products performed similarly under dry soil conditions. However, differences among individual products were observed during periods of hydrologic stress (i.e., wet soil conditions). Surfacing of effluent was not observed atop any product, indicating that the current loading rate design method is functioning properly. Preliminary results indicate that some alternative absorption-field products perform similarly to the traditional pipe-and-gravel system, thus providing flexibility and options for homeowners.     

Spectroscopic approaches for phosphorus speciation in soils and other environmental systems

In the past decades, environmental scientists have become increasingly involved in developing novel approaches for applying emerging spectroscopic techniques to complex environmental matrices. The objective of this review is to convey the most common chemical species of phosphorus reported for soils, sediments, model systems, and waste materials based on analyses by four spectroscopic techniques: X-ray absorption near-edge structure, nuclear magnetic resonance, Fourier transform infrared spectroscopy, and Raman spectroscopy. Unique information is provided by each technique at a level of specificity that depends in part on matrix complexity. The X-ray absorption near-edge structure and nuclear magnetic resonance techniques reveal inorganic and organic P species in intact environmental matrices or in chemical extracts, whereas the Fourier transform infrared and Raman techniques can provide more specific bonding information about mineral or adsorbed P species in model analogs of matrix components. The most common P species in soils and sediments as indicated by spectroscopy are hydroxyapatite and octacalcium phosphate minerals, phosphate adsorbed on Fe- and Al-oxides, pyrophosphates and polyphosphates, phosphate mono- and di-esters, and phosphonates. Continued advancements in spectroscopic methods should improve speciation-based models of P mobilization and transformations in the environment.     

Perfluorinated phosphine oxide and sulfides as extractants for heavy metals and radionuclides

New highly fluorinated monodentate and bidentate phosphine oxide compounds of the type {CF(3)(CF(2))(n)CH(2)CH(2)}(3)PO (n = 5, 9) and [{CF(3)(CF(2))(5)CH(2)CH(2)}(2)P(O)CH(2)CH(2)P(O){CH(2)CH(2)(CF(2))(5)CF(3)}] have been prepared. Their ability to extract a number of metals and radionuclides from aqueous solutions into perfluorinated solvents has been established and the extractable species investigated. All extractants extract the metals As(V), Cd(II), Co(II), Cr(VI), Hg(II), Pb(II), and Sn(II) with >75% removal. In addition, the radioisotopes (90)Sr(II), (133)Ba(II), and U(VI) have been investigated, whilst (59)Fe(III) has been used to model the extraction of plutonium. (133)Ba(II) shows a high distribution ratio for monodentate phosphine oxides, whilst for UO(2)(2+) and (59)Fe(III) bidentate phosphine oxides are superior.