Introduction to the Air & Waste Management Association's 29th Annual Critical Review

Abstract

On-road mobile sources contribute substantially to ambient air concentrations of the carcinogens 1,3-butadiene, benzene, and polycyclic aromatic hydrocarbons (PAHs). The current study measured benzene and 1,3-butadiene at the Baltimore Harbor Tunnel tollbooth over 3-hr intervals on seven weekdays (n = 56). Particle-bound PAH was measured on a subset of three days. The 3-hr outdoor 1,3-butadiene levels varied according to time of day and traffic volume. The minimum occurred at night (12 a.m.–3 a.m.) with a mean of 2 µg/m³ (SD = 1.3, n = 7), while the maximum occurred during the morning rush hour (6 a.m.–9 a.m.) with a mean of 11.9 µg/m³ (SD = 4.6, n = 7). The corresponding traffic counts were 1413 (SD = 144) and 16,893 (SD = 692), respectively. During the same intervals, mean benzene concentration varied from 3 µg/m³ (SD = 3.1, n = 7) to 22.3 µg/m³ (SD = 7.6, n = 7). Median PAH concentrations ranged from 9 to 199 ng/m³. Using multivariate regression, a significant association (p < 0.001) between traffic and curbside concentration was observed. Much of the pollutant variability (1,3-butadiene 62%, benzene 77%, and PAH 85%) was explained by traffic volume, class, and meteorology. Results suggest >2-axle vehicles emit 60, 32, and 9 times more PAH, 1,3-butadiene, and benzene, respectively, than do 2-axle vehicles. This study provides a model for estimating curbside pollution levels associated with traffic that may be relevant to exposures in the urban environment.     

Revealing source signatures in ambient BTEX concentrations

Management of ambient concentrations of Volatile Organic Compounds (VOCs) is essential for maintaining low ozone levels in urban areas where its formation is under a VOC-limited regime. The significant decrease in traffic-induced VOC emissions in many developed countries resulted in relatively comparable shares of traffic and non-traffic VOC emissions in urban airsheds. A key step for urban air quality management is allocating ambient VOC concentrations to their pertinent sources. This study presents an approach that can aid in identifying sources that contribute to observed BTEX concentrations in areas characterized by low BTEX concentrations, where traditional source apportionment techniques are not useful. Analysis of seasonal and diurnal variations of ambient BTEX concentrations from two monitoring stations located in distinct areas reveal the possibility to identify source categories. Specifically, the varying oxidation rates of airborne BTEX compounds are used to allocate contributions of traffic emissions and evaporative sources to observed BTEX concentrations.     

Use of plastic waste (poly-ethylene terephthalate) in asphalt concrete mixture as aggregate replacement.

One of the environmental issues in most regions of Iran is the large number of bottles made from poly-ethylene terephthalate (PET) deposited in domestic wastes and landfills. Due to the high volume of these bottles, more than 1 million m3 landfill space is needed for disposal every year. The purpose of this experimental study was to investigate the possibility of using PET waste in asphalt concrete mixes as aggregate replacement (Plastiphalt) to reduce the environmental effects of PET disposal. For this purpose the mechanical properties of plastiphalt mixes were compared with control samples. This study focused on the parameters of Marshall stability, flow, Marshall quotient (stability-to-flow ratio) and density. The waste PET used in this study was in the form of granules of about 3 mm diameter which would replace (by volume) a portion of the mineral coarse aggregates of an equal size (2.36-4.75 mm). In all prepared mixes the determined 6.6% optimum bitumen content was used. In this investigation, five different percentages of coarse aggregate replacement were used. The results showed that the aggregate replacement of 20% by volume with PET granules would result in a reduction of 2.8% in bulk compacted mix density. The value of flow in the plastiphalt mix was lower than that of the control samples. The results also showed that when PET was used as partial aggregate replacement, the corresponding Marshall stability and Marshall quotient were almost the same as for the control samples. According to most of specification requirement, these results introduce an asphalt mix that has properties that makes it suitable for practical use and furthermore, the recycling of PET for asphalt concrete roads helps alleviate an environmental problem and saves energy.     

Self body-size perception in an insect

Animals negotiating complex environments encounter a wide range of obstacles of different shapes and sizes. It is greatly beneficial for the animal to react to such obstacles in a precise, context-specific manner, in order to avoid harm or even simply to minimize energy expenditure. An essential key challenge is, therefore, an estimation of the animal’s own physical characteristics, such as body size. A further important aspect of self body-size perception (or SBSP) is the need to update it in accordance with changes in the animal’s size and proportions. Despite the major role of SBSP in functional behavior, little is known about if and how it is mediated. Here, we demonstrate that insects are also capable of self perception of body size and that this is a vital factor in allowing them to adjust their behavior following the sudden and dramatic growth associated with periodic molting. We reveal that locusts’ SBSP is strongly correlated with their body size. However, we show that the dramatic change in size accompanying adult emergence is not sufficient to create a new and updated SBSP. Rather, this is created and then consolidated only following the individuals’ experience and interaction with the physical environment. Behavioral or pharmacological manipulations can both result in maintenance of the old larval SBSP. Our results emphasize the importance of learning and memory-related processes in the development and update of SBSP, and highlight the advantage of insects as good models for a detailed study on the neurobiological and molecular aspects of SBSP.     

Evaluation of workers' exposure to methylene diphenyl diisocyanate (MDI) in an automobile manufacturing company, Iran.

Evaluation of personal inhalation exposure to methylene diphenyl diisocyanate (MDI) among 39 employees, working in the window fixation and window glue processes in an automobile manufacturing company was performed. This study was conducted for both case and control groups. After sampling and sample preparation processes, MDI was determined with a UV-VIS spectrophotometer at 590 nm; the lung function was assessed with a digital spirometer, too. The average concentration of MDI in the window fixation, and window glue workplaces were 34.53 and 27.37 micro g/m3, respectively, which was lower than the threshold limit value (TLV) recommended by the American Conference of Governmental Industrial Hygienists (ACGIH) (51 micro g/m3). Respiratory symptoms in the exposed group were significantly different compared to the unexposed group (p < .05). Lung capacities in the case group were lower than in the control group (p < .05). Therefore, MDI can be easily measured making it possible to evaluate the adverse effects caused by occupational exposure.     

Discovering and characterizing farm households’ resilience under water scarcity

Water scarcity at an alarming rate has been a limiting factor for sustainable agriculture in arid and semi-arid environments of the world. It has resulted in a number of problems such as poverty and food insecurity among farm households. Therefore, building and improving resilience, as a way to mitigate the impacts of water scarcity, is important for farm households. But one of the significant steps for planning to improve farm households’ resilience under water scarcity is investigation of the current level of resilience of these households and understanding their variances. Therefore, this study offers a classification of farm households’ diversity based on resilience. Primary data were collected from 260 randomly selected farm households in 21 villages around Parishan wetland, Iran. Farm Household Resilience Scale was used to measure resilience. Cluster analysis suggested three groups: highly, medium-, and low-resilient farm households. The results of comparing three groups revealed that highly resilient farm households characterize with higher risk management, more agricultural water security, more positive psychological traits, and better knowledge management. Also, they had better water quality, attended more agricultural extension activities, and used modern irrigation systems. Farm households’ resilience map using GIS software illustrated that there is a relationship between resilience and farm location from the wetland. The findings of this study could be used by planner and policy-makers to improve farm households’ resilience in arid and semi-arid environments. Improvement in knowledge management system is recommended as one of the most effective policy instruments in building resilience.     

A comprehensive systematic review of photocatalytic degradation of pesticides using nano TiO2

Environmental Science and Pollution Research - This study has systematically reviewed all of the research articles about the photocatalytic degradation of pesticides using titanium dioxide (TiO2)...     

Microbial and size characterization of airborne particulate matter collected on sticky tapes along US–Mexico border

Particulate matter(PM) emissions from various sources can affect significantly human health and environmental quality especially in the Chihuahuan Desert region along US–Mexico border. The objective of this study was to use the low-cost sticky tape method to collect airborne PM for size characterization and identification of fungal spores. Sticky tape samplers were placed at 1.0 and 2.0 m above the ground surface at experimental sites in Ciudad Juárez, Mexico and at 0.6, 1.2 and 1.8 m at New Mexico sites, USA. Soil samples were collected in both countries to determine fungal diversity, texture and moisture content Dust particles collected from all of the experimental sites had a dominant texture of clay( 0.002 mm). The dominant textures identified from soil samples collected from the US and Mexican sites were loam and sandy clay loam, respectively. Alternaria, Penicillium and Fusarium were frequently found funguses in the US sites while Alternaria and Aspergillus were commonly observed in the Mexican sites. The sticky tapes also showed a similar diversity of fungal microorganisms present in the airborne PM at both Mexico and US sites Alternaria, Penicillium and Aspergillus were the three groups of airborne fungal microorganisms consistently present in the US and Mexican sites. The low-cost sticky tape method has the potential to be used for characterizing different airborne microorganisms and dust particles.     

Numerical and experimental analysis of wind erosion on a sinusoidal pile

Erosion is a common phenomenon in nature, and it may cause a wide range of problems such as air pollution, and destruction of agricultural land, shelters and stockpiles. The present work deals with stockpiles, which have their profiles described by a sinus function or by similar trigonometric functions. Analysis of the erosion by air flow over these piles will provide for further understanding of the erosion underlying mechanisms and, moreover, how to control them and eventually to prevent them. To this purpose, different experimental tests are conducted for a pile with a sinuous profile, and particular attention is given to the time development of the profile due to the erosion process; the effect of the air velocity is also studied by selecting different velocities. In addition, the flow over several deformed piles is numerically predicted using the CFX software; the results clearly show the erosion process is strongly dependent upon time, velocity field and surface disturbances. A correlation between the erosion rate and the velocity is proposed.