Integrating Geographic Information System network analysis and nighttime light satellite imagery to optimize landfill regionalization on a regional level

More than half of financial resources allocated for municipal solid waste management are typically spent on waste collection and transportation. An optimized landfill siting and waste collection system can save fuel costs, reduce collection truck emissions, and provide higher accessibility with lower traffic impacts. In this study, a data-driven analytical framework is developed to optimize population coverage by landfills using network analysis and satellite imagery. Two scenarios, SC1 and SC2, with different truck travel times were used to simulate generation-site–disposal-site distances in three Canadian provinces. Under status quo conditions, Landfill Regionalization Index (LFRI) ranging from 0 to 2 population centers per landfill in all three jurisdictions. LFRI consistently improved after optimization, with average LFRI ranging from 1.3 to 2.0 population centers per landfill. Lower average truck travel times and better coverage of the population centers are generally observed in the optimized systems. The proposed analytical method is found effective in improving landfill regionalization. Under SC1 and SC2, LFRI percentages of improvement ranging from 58.3% to 64.5% and 22.7% to 59.4%, respectively. Separation distance between the generation and disposal sites and truck capacity appear not a decisive factor in the optimization process. The proposed optimization framework is generally applicable to regions with different geographical and demographical attributes, and is particularly applicable in rural regions with sparsely located population centers.

     

Demography of central and marginal populations of monkeyflowers (Mimulus cardinalis and M. lewisii)

Every species occupies a limited geographic area, but how spatiotemporal environmental variation affects individual and population fitness to create range limits is not well understood. Because range boundaries arise where, on average, populations are more likely to go extinct than to persist, range limits are an inherently population-level problem for which a demographic framework is useful. In this study, I compare demographic parameters and population dynamics between central and marginal populations of monkeyflowers, Mimulus cardinalis and M. lewisii, along an elevation gradient spanning both species' ranges. Central and marginal populations of both species differed in survival and fecundity. For M. lewisii, these components of fitness were higher in central than in marginal populations, but for M. cardinalis the converse was true. To assess spatiotemporal variation in population dynamics, I used transition matrix models to estimate asymptotic population growth rates (lambda) and found that population growth rates of M. lewisii were highest at the range center and reduced at the range margin. Population growth rates of M. cardinalis were highest at the range margin and greatly reduced at the range center. Life table response analysis decomposed spatiotemporal variation in lambda into contributions from each transition between life stages, finding that transitions from large nonreproductive and reproductive plants to the seed class and stasis in the reproductive class made the largest contributions to spatial differences in lambda. These transitions had only low to moderate sensitivities, indicating that differences in projected population growth rates resulted mainly from observed differences in transition matrix parameters and their underlying vital rates.     

Relation between PAH and black carbon contents in size fractions of Norwegian harbor sediments

Distributions of total organic carbon (TOC), black carbon (BC), and polycyclic aromatic hydrocarbons (PAH) were investigated in different particle size fractions for four Norwegian harbor sediments. The total PAH (16-EPA) concentrations ranged from 2 to 113 mg/kg dry weight with the greatest fraction of PAH mass in the sand fraction for three of the four sediments. TOC contents ranged from 0.84% to 14.2% and BC contents from 0.085% to 1.7%. This corresponds to organic carbon (OC = TOC - BC) contents in the range of 0.81-14% and BC:TOC ratios of 1.3-18.1%. PAH isomer ratios suggested that the PAH in all four sediments were of pyrogenic origin. Furthermore, stronger correlations between PAH versus BC (r2 = 0.85) than versus OC (r2 = 0.15) were found. For all size fractions and bulk sediments, the PAH-to-BC ratios for the total PAHs were on average 6+/-3 mg PAH/g BC. These results suggest that PAH distributions were dominated by the presence of BC, rather than OC. As sorption to BC is much stronger than sorption to OC, this may result in significantly lower dissolved concentrations of PAH than expected on the basis of organic carbon partitioning alone.     

Quality-assured measurements of animal building emissions: particulate matter concentrations

Federally funded, multistate field studies were initiated in 2002 to measure emissions of particulate matter (PM) < 10 microm (PM10) and total suspended particulate (TSP), ammonia, hydrogen sulfide, carbon dioxide, methane, nonmethane hydrocarbons, and odor from swine and poultry production buildings in the United States. This paper describes the use of a continuous PM analyzer based on the tapered element oscillating microbalance (TEOM). In these studies, the TEOM was used to measure PM emissions at identical locations in paired barns. Measuring PM concentrations in swine and poultry barns, compared with measuring PM in ambient air, required more frequent maintenance of the TEOM. External screens were used to prevent rapid plugging of the insect screen in the PM10 preseparator inlet. Minute means of mass concentrations exhibited a sinusoidal pattern that followed the variation of relative humidity, indicating that mass concentration measurements were affected by water vapor condensation onto and evaporation of moisture from the TEOM filter. Filter loading increased the humidity effect, most likely because of increased water vapor adsorption capacity of added PM. In a single layer barn study, collocated TEOMs, equipped with TSP and PM10 inlets, corresponded well when placed near the inlets of exhaust fans in a layer barn. Initial data showed that average daily mean concentrations of TSP, PM10, and PM2.5 concentrations at a layer barn were 1440 +/- 182 microg/m3 (n = 2), 553 +/- 79 microg/m3 (n = 4), and 33 +/- 75 microg/m3 (n = 1), respectively. The daily mean TSP concentration (n = 1) of a swine barn sprinkled with soybean oil was 67% lower than an untreated swine barn, which had a daily mean TSP concentration of 1143 +/- 619 microg/m3. The daily mean ambient TSP concentration (n = 1) near the swine barns was 25 +/- 8 microg/m3. Concentrations of PM inside the swine barns were correlated to pig activity.     

Selection of a water-extractable phosphorus test for manures and biosolids as an indicator of runoff loss potential

The correlation of runoff phosphorus (P) with water-extractable phosphorus (WEP) in land-applied manures and biosolids has spurred wide use of WEP as a water quality indicator. Land managers, planners, and researchers need a common WEP protocol to consistently use WEP in nutrient management. Our objectives were to (i) identify a common WEP protocol with sufficient accuracy and precision to be adopted by commercial testing laboratories and (ii) confirm that the common protocol is a reliable index of runoff P. Ten laboratories across North America evaluated alternative protocols with an array of manure and biosolids samples. A single laboratory analyzed all samples and conducted a separate runoff study with the manures and biosolids. Extraction ratio (solution:solids) was the most important factor affecting WEP, with WEP increasing from 10:1 to 100:1 and increasing from 100:1 to 200:1. When WEP was measured by a single laboratory, correlations with runoff P from packed soil boxes amended with manure and biosolids ranged from 0.79 to 0.92 across all protocol combinations (extraction ratio, filtration method, and P determination method). Correlations with P in runoff were slightly lower but significant when WEP was measured by the 10 labs (r=0.56-0.86). Based on laboratory repeatability and water quality evaluation criteria, we recommend the following common protocol: 100:1 extraction ratio; 1-h shaking and centrifuge 10 min at 1500xg (filter with Whatman #1 paper if necessary); and determining P by inductively coupled plasma-atomic emission spectrometry or colorimetric methods.     

Evaluation of Risk from Using Poultry Litter to Remediate and Reuse Contaminated Estuarine Sediments

The availability of heavy metals in contaminated sediment evaluated for beneficial reuse, before and after chemical amendment, was evaluated using poultry manure as the amendment. The dredged sediment was only slightly contaminated with heavy metals. Availability tests on the amended sediment showed an increase in heavy metals, most likely because of poultry feed amendments passed to the manure. There would be difficulty finding one chemical amendment to reduce the availability of a number of heavy metals because the metals exhibit different chemical properties. © 2001 John Wiley & Sons, Inc.     

Stable oligonucleotide-functionalized gold nanosensors for environmental biocontaminant monitoring

The global propagation of environmental biocontaminants such as antibiotic resistant pathogens and their antibiotic resistance genes(ARGs) is a public health concern that highlights the need for improved monitoring strategies. Here, we demonstrate the environmental stability and applicability of an oligonucleotide-functionalized gold nanosensor. The mec A ARG was targeted as model biocontaminant due to its presence in clinically-relevant pathogens and to its emergence as an environmental contaminant.mec A-specific nanosensors were tested for antibiotic resistance gene(ARG) detection in ARG-spiked effluent from four wastewater treatment plants(WWTPs). The mec A-specific nanosensors showed stability in environmental conditions and in high ionic strength([MgCl_2] 50 m M), and high selectivity against mismatched targets. Spectrophotometric detection was reproducible with an LOD of 70 pM(≈ 4 × 10~7 genes/μL), even in the presence of interferences associated with non-target genomic DNA and complex WWTP effluent. This contribution supports the environmental applicability of a new line of cost-effective, field-deployable tools needed for wide-scale biocontaminant monitoring.     

Safety in the mining industry and the unfinished legacy of mining accidents: Safety levers and defense-in-depth for addressing mining hazards

Mining remains one of the most hazardous occupations worldwide and underground coal mines are especially notorious for their high accident rates. In this work, we provide an overview of the broad and multi-faceted topic of safety in the mining industry. After reviewing some statistics of mining accidents in the United States, we focus on one pervasive and deadly failure mode in mines, namely explosions. The repeated occurrence of mine explosions, often in similar manner, is the loud unfinished legacy of mining accidents and their occurrence in the 21st century is inexcusable and should constitute a strong call for action for all stakeholders in this industry to settle this problem. We analyze one such recent mine disaster in which deficiencies in various safety barriers failed to prevent the accident initiating event from occurring, then subsequent lines of defense failed to block this accident scenario from unfolding and to mitigate its consequences. We identify the technical, organizational, and regulatory deficiencies that failed to prevent the escalation of the mine hazards into an accident, and the accident into a “disaster”. This case study provides an opportunity to illustrate several concepts that help describe the phenomenology of accidents, such as initiating events, precursor or lead indicator, and accident pathogen. Next, we introduce the safety principle of defense-in-depth, which is the basis for regulations and risk-informed decisions by the US Nuclear Regulatory Commission, and we examine its relevance and applicability to the mining system in support of accident prevention and coordinating actions on all the safety levers, technical, organizational, and regulatory to improve mining safety. The mining system includes the physical confines and characteristics of the mine, the equipment in the mine, the individuals and the organization that operate the mine, as well as the processes and regulatory constraints under which the mine operates. We conclude this article with the proposition for the establishment of defense-in-depth as the guiding safety principle for the mining industry and we indicate possible benefits for adopting this structured hazard-centric system approach to mining safety.     

Quantity and quality: unifying food web and ecosystem perspectives on the role of resource subsidies in freshwaters

Although the study of resource subsidies has emerged as a key topic in both ecosystem and food web ecology, the dialogue over their role has been limited by separate approaches that emphasize either subsidy quantity or quality. Considering quantity and quality together may provide a simple, but previously unexplored, framework for identifying the mechanisms that govern the importance of subsidies for recipient food webs and ecosystems. Using a literature review of > 90 studies of open-water metabolism in lakes and streams, we show that high-flux, low-quality subsidies can drive freshwater ecosystem dynamics. Because most of these ecosystems are net heterotrophic, allochthonous inputs must subsidize respiration. Second, using a literature review of subsidy quality and use, we demonstrate that animals select for high-quality food resources in proportions greater than would be predicted based on food quantity, and regardless of allochthonous or autochthonous origin. This finding suggests that low-flux, high-quality subsidies may be selected for by animals, and in turn may disproportionately affect food web and ecosystem processes (e.g., animal production, trophic energy or organic matter flow, trophic cascades). We then synthesize and review approaches that evaluate the role of subsidies and explicitly merge ecosystem and food web perspectives by placing food web measurements in the context of ecosystem budgets, by comparing trophic and ecosystem production and fluxes, and by constructing flow food webs. These tools can and should be used to address future questions about subsidies, such as the relative importance of subsidies to different trophic levels and how subsidies may maintain or disrupt ecosystem stability and food web interactions.