Evaluation of the use of diffusive air samplers for determining temporal and spatial variation of volatile organic compounds in the ambient air of urban communities

The Houston-Galveston metropolitan area has a relatively high density of point and mobile sources of air toxics, and determining and understanding the relationship between emissions and ambient air concentrations of air toxics is important for evaluating potential impacts on public health and formulating effective regulatory policies to control this impact, both in this region and elsewhere. However, conventional ambient air monitoring approaches are limited with regard to expense, siting limitations, and representative sampling necessary for adequate exposure assessment. The overall goal of this multiphase study is to evaluate the use of simple passive air samplers to determine temporal and spatial variability of the ambient air concentrations of selected volatile organic compounds (VOCs) in urban areas. Phase 1 of this study, reported here, was a field evaluation of 3M organic vapor monitors (OVMs) involving limited comparisons with commonly used active sampling methods, an assessment of sampler precision, a determination of optimal sampling duration, and an investigation of the utility of a simple modification of the commercial sampler. The results indicated that a sampling duration of 72 hr exhibited generally low bias relative to automated continuous gas chromatography measurements, good overall precision, and an acceptable number of measurements above detection limits. The modified sampler showed good correlation with the commercial sampler, with higher sampling rates, although lower than expected.     

Accumulation of radionuclides released to a reactor discharge pond

Due to material degradation in tubing, the heat exchanger for the primary coolant of the 1 MW Tsing Hua Open-pool Reactor has minor leakage to the secondary cooling system since 1970. In the past 20 years, trace amounts of ^58,60Co, ⁵¹Cr, ¹³⁷Cs, ⁵⁴Mn, ⁴⁶Sc, and ⁶⁵Zn have leaked through the cooling system, accumulated, and eventually trapped in the discharge pond directly in front of the reactor. The distribution of these radionuclides in the mud at different depths and various locations in the pond was measured with standard procedures of radioactive soil sampling and counting techniques. Concentration of corrosion products, with no more than 40 KBq/Kg dry at the hottest spot, was contour-mapped to reveal the accumulation patterns of these trace level radioactive products at the end of the 20-year period.     

Biotreatment of hydrogen sulfide- and ammonia-containing waste gases by fluidized bed bioreactor

Gas mixtures of H2S and NH3 are the focus of this study of research concerning gases generated from animal husbandry and treatments of anaerobic wastewater lagoons. A heterotrophic microflora (a mixture of Pseudomonas putida for H2S and Arthrobacter oxydans for NH3) was immobilized with Ca-alginate and packed into a fluidized bed reactor to simultaneously decompose H2S and NH3. This bioreactor was continuously supplied with H2S and NH3 separately or together at various ratios. The removal efficiency, removal rate, and metabolic product of the bioreactor were studied. The results showed that the efficiency remained above 95% when the inlet H2S concentration was below 30 ppm at 36 L/hr. Furthermore, the apparent maximum removal and the apparent half-saturation constant were 7.0 x 10(-8) g-S/cell/day and 76.2 ppm, respectively, in this study. The element sulfur as a main product prevented acidification of the biofilter, which maintained the stability of the operation. As for NH3, the greater than 90% removal rate was achieved as long as the inlet concentration was controlled below 100 ppm at a flow rate of 27 L/hr. In the NH3 inlet, the apparent maximum removal and the apparent half-saturation constant were 1.88 x 10(-6) g-N/cell/day and 30.5 ppm, respectively. Kinetic analysis showed that 60 ppm of NH3 significantly suppressed the H2S removal by Pseudomonas putida, but H2S in the range of 5-60 ppm did not affect NH3 removal by Arthrobacter oxydans. Results from bioaerosol analysis in the bioreactor suggest that the co-immobilized cell technique applied for gas removal creates less environmental impact.     

Screening plant species native to Taiwan for remediation of 137Cs-contaminated soil and the effects of K addition and soil amendment on the transfer of 137Cs from soil to plants

This study aims to screen plant species native to Taiwan that could be used to eliminate (137)Cs radionuclides from contaminated soil. Four kinds of vegetables and two kinds of plants known as green manures were used for the screening. The test plants were cultivated in (137)Cs-contaminated soil and amended soil which is a mixture of the contaminated one with a horticultural soil. The plant with the highest (137)Cs transfer factor was used for further examination on the effects of K addition on the transfer of (137)Cs from the soils to the plant. Experimental results revealed that plants cultivated in the amended soil produced more biomass than those in the contaminated soil. Rape exhibited the highest production of aboveground parts, and had the highest (137)Cs transfer factor among all the tested plants. The transfer of (137)Cs to the rape grown in the soil to which 100 ppm KCl commonly used in local fertilizers had been added, were restrained. Results of this study indicated that rape, a popular green manure in Taiwan, could remedy (137)Cs-contaminated soil.     

Global pollution monitoring of butyltin compounds using skipjack tuna as a bioindicator

Butyltin compounds (BTs) including mono- (MBT), di- (DBT), tri-butyltin (TBT) and total tin (sigmaSn), were determined in the liver of skipjack tuna (Katsuwonus pelamis) collected from Asian offshore waters (off-Japan, the Japan Sea, off-Taiwan, the East China Sea, the South China Sea, off-Philippines, off-Indonesia, the Bay of Bengal), off-Seychelles, off-Brazil and open seas (the North Pacific). BTs were detected in all the skipjack tuna collected, suggesting widespread contamination of BTs even in offshore waters and open seas on a global scale. Considering specific accumulation, Sex-, body length- differences and migration of skipjack tuna did not seem to affect BT concentrations, indicating rapid reflection of the pollution levels in seawater where and when they were collected. Skipjack tuna is a suitable bioindicator for monitoring the global distribution of BTs in offshore waters and open seas. High concentrations of BTs were observed in skipjack tuna from offshore waters around Japan, a highly developed and industrialized region (up to 400 ng/g wet weight). Moreover skipjack tuna collected from offshore waters around Asian developing countries also revealed the levels comparable to those in Japan (up to 270 ng/g wet weight) which may be due to the recent improvement in economic status in Asian developing countries. High percentages (almost 90%) of BTs in total tin (sigmaSn: sum of inorganic tin+organic tin) were found in the liver of skipjack tuna from offshore waters around Asian developing countries. This finding suggests that the anthropogenic BTs represent the major source of Sn accumulation in skipjack tuna from these regions.     

Reactive Compatibilization of Biobased Polyurethane Prepolymer Toughening Polylactide Prepared by Melt Blending

Polylactide (PLA) is a major biodegradable polymer, which has received extensive interests over the past decades and holds great potential to replace several petroleum-based polymeric materials. Nevertheless, the inherent brittleness and low impact strength have restricted its invasion to niche markets. In this paper, the authors demonstrate that the entirely bio-sourced blends, namely PLA and castor oil-based polyurethane prepolymer (COPUP), were first melt-compounded in an effort to prepare novel biodegradable materials with an excellent balance of properties. NCO-terminated COPUP was successfully synthesized and subsequently mixed with variable concentration of PLA matrix using melt-compounded by twin-screw extrusion technique. The miscibility, phase morphology, mechanical properties, and thermal resistance of the blends were investigated. During FTIR analysis, it suggests that the interfacial compatibilization between COPUP and PLA phase occurred by the reaction of –NCO group of MDI with terminal hydroxyl group of PLA. DMA analysis showed that COPUP and PLA showed some limited miscibility with shifted glass transition temperature. The morphologies of fracture surface showed a brittle-to-ductile transition owing by the addition of COPUP. The crystallization behavior was studied by differential scanning calorimeter (DSC). The strain at break and notched impact strength of PLA/COPUP blends were increased more than 112–15.4 times elegant of neat PLA; the increase is superior to previous toughening effect by using petroleum-based tougheners. Furthermore, the thermal resistances and melt flow properties of the materials were also examined by analysis of the melt flow index and heat deflection temperature use in the work. With enhanced toughness, the PLA/COPUP blends could be used as replacements for some traditional petroleum-based polymeric materials.     

Recovery of uranium phosphate by a stepwise thermal treatment of uranium-bearing spent TBP

A stepwise thermal treatment process for the recovery of uranium phosphate from uranium-dissolved spent TBP was demonstrated. The pathway of the reactions involved in the thermal decomposition and oxidation processes of uranium-bearing spent TBP was established based on the results of thermogravimetric analyses. Relatively low-temperature pyrolysis is required to avoid the condensation of corrosive phosphoric acid via vaporization. Low-temperature pyrolysis residue was analyzed and found to be composed of pyrocarbon, phosphorus oxide (P₂O₅) and two types of uranium phosphate (UP₂O₇ and UP₄O₁₂). Uranium pyrophosphate (UP₂O₇) was recovered from the burning out of pyrocarbon in the pyrolysis residue after the dissolution removal of phosphorus oxide in water. A substantial recovery of uranium by the proposed stepwise thermal treatment method was successfully demonstrated by a treatment of pyrolysis residue from a bench-scale low-temperature pyrolysis process.     

Risk management for outsourcing biomedical waste disposal – Using the failure mode and effects analysis

Using the failure mode and effects analysis, this study examined biomedical waste companies through risk assessment. Moreover, it evaluated the supervisors of biomedical waste units in hospitals, and factors relating to the outsourcing risk assessment of biomedical waste in hospitals by referring to waste disposal acts. An expert questionnaire survey was conducted on the personnel involved in waste disposal units in hospitals, in order to identify important factors relating to the outsourcing risk of biomedical waste in hospitals. This study calculated the risk priority number (RPN) and selected items with an RPN value higher than 80 for improvement. These items included “availability of freezing devices”, “availability of containers for sharp items”, “disposal frequency”, “disposal volume”, “disposal method”, “vehicles meeting the regulations”, and “declaration of three lists”. This study also aimed to identify important selection factors of biomedical waste disposal companies by hospitals in terms of risk. These findings can serve as references for hospitals in the selection of outsourcing companies for biomedical waste disposal.     

Differential enhanced degradation of cis‐ and trans‐1,3‐D in soil with a history of repeated field applications of 1,3‐D

Abstract

The fumigant 1,3‐dichloropropene (1,3‐D) is considered to be a potential alternative to methyl bromide. The degradation rates of cis‐ and trans‐l,3‐D in soil from a treated site during three successive annual applications of 1,3‐D progressively increased with an increase in the number of annual applications. The enhancement was greater for trans‐l,3‐D degradation than cis‐l,3‐D. In untreated soil, the degradation rates of the two isomers were similar. The enhancement lasted slightly longer than 2 years after annual field application of 1,3‐D had ceased. A single field reapplication of 1,3‐D to the treated site that had not been treated for 2 years resulted in resumed differential enhanced degradation of cis‐ and trans‐l,3‐D. Microorganisms were responsible for the enhanced degradation.