Assessment of Eutrophication in Estuaries: Pressure–State–Response and Nitrogen Source Apportionment

A eutrophication assessment method was developed as part of the National Estuarine Eutrophication Assessment (NEEA) Program. The program is designed to improve monitoring and assessment of eutrophication in the estuaries and coastal bays of the United States with the intent to guide management plans and develop analytical and research models and tools for managers. These tools will help guide and improve management success for estuaries and coastal resources. The assessment method, a Pressure-State-Response approach, uses a simple model to determine Pressure and statistical criteria for indicator variables (where applicable) to determine State. The Response determination is mostly heuristic, although research models are being developed to improve that component. The three components are determined individually and then combined into a single rating. Application to several systems in the European Union (E.U.), specifically in Portugal, shows that the method is transferable, and thus is useful for development of management measures in both the Unites States and E.U. This approach identifies and quantifies the key anthropogenic nutrient input sources to estuaries so that management measures can target inputs for maximum effect. Because nitrogen is often the limiting nutrient in estuarine systems, examples of source identification and quantification for nitrogen have been developed for 11 coastal watersheds on the U.S. east coast using the WATERSN model. In general, estuaries in the Northeastern United States receive most of their nitrogen from human sewage, followed by atmospheric deposition. This is in contrast to some watersheds in the Mid-Atlantic (Chesapeake Bay) and South Atlantic (Pamlico Sound), which receive most of their nitrogen from agricultural runoff. Source identification is important for implementing effective management measures that should be monitored for success using assessment methods, as described herein. For instance, these results suggest that Northeastern estuaries would likely benefit most from improved sewage treatment, where as the Mid and South Atlantic systems would benefit most from agricultural runoff reductions.     

Evaluation of Saccharomyces cerevisiae strains as probiotic agent with aflatoxin B1 adsorption ability for use in poultry feedstuffs

In this study the aflatoxin B₁ (AFB₁) removal capacity, the tolerance to salivary and gastrointestinal conditions, autoaggregation and coaggregation with pathogenic bacteria of Saccharomyces cerevisiae strains isolated from broiler feces, were evaluated. Only four of twelve isolated strains were identified as Saccharomyces cerevisiae using molecular techniques. The results obtained in AFB₁ binding studies indicated that the amount of AFB₁ removed was both strain and mycotoxin-concentration dependent. Therefore, a theoretical model was applied in order to select the most efficient strain to remove AFB₁ in a wide range of mycotoxin concentration. The results indicated that S. cerevisiae 08 and S. cerevisiae 01 strains were the most efficient microorganisms in the mycotoxin removal. Viability on simulated salivary and gastrointestinal conditions was investigated and S. cerevisiae 08 strain showed the best results, achieving 98% of total survival whereas S. cerevisiae 01 reached only 75%. Autoaggregation and coaggregation assays showed S. cerevisiae 08 as the most appropriate strain, mainly because it was the unique strain able to coaggregate with the four bacterial pathogens assayed. Consequently, S. cerevisiae 08 is the best candidate for future in vivo studies useful to prevent aflatoxicosis. Further quantitative in vitro and in vivo studies are required to evaluate the real impact of yeast-binding activity on the bioavailability of AFB₁ in poultry. However, this study could be useful in selecting efficient strains in terms of AFB₁ binding and provide an important contribution to research into microorganisms with potential probiotic effects on the host.     

Ecological restoration as a strategy for mitigating and adapting to climate change: lessons and challenges from Brazil

Climate change is a global phenomenon that affects biophysical systems and human well-being. The Paris Agreement of the United Nations Framework Convention on Climate Change entered into force in 2016 with the objective of strengthening the global response to climate change by keeping global temperature rise this century well below 2 °C above pre-industrial levels and to pursue efforts to limit the temperature increase even further to 1.5 °C. The agreement requires all Parties to submit their “nationally determined contributions” (NDCs) and to strengthen these efforts in the years ahead. Reducing carbon emissions from deforestation and forest degradation is an important strategy for mitigating climate change, particularly in developing countries with large forests. Extensive tropical forest loss and degradation have increased awareness at the international level of the need to undertake large-scale ecological restoration, highlighting the need to identify cases in which restoration strategies can contribute to mitigation and adaptation. Here we consider Brazil as a case study to evaluate the benefits and challenges of implementing large-scale restoration programs in developing countries. The Brazilian NDC included the target of restoring and reforesting 12 million hectares of forests for multiple uses by 2030. Restoration of native vegetation is one of the foundations of sustainable rural development in Brazil and should consider multiple purposes, from biodiversity and ecosystem services conservation to social and economic development. However, ecological restoration still presents substantial challenges for tropical and mega-diverse countries, including the need to develop plans that are technically and financially feasible, as well as public policies and monitoring instruments that can assess effectiveness. The planning, execution, and monitoring of restoration efforts strongly depend on the context and the diagnosis of the area with respect to reference ecosystems (e.g., forests, savannas, grasslands, wetlands). In addition, poor integration of climate change policies at the national and subnational levels and with other sectorial policies constrains the large-scale implementation of restoration programs. The case of Brazil shows that slowing deforestation is possible; however, this analysis highlights the need for increased national commitment and international support for actions that require large-scale transformations of the forest sector regarding ecosystem restoration efforts. Scaling up the ambitions and actions of the Paris Agreement implies the need for a global framework that recognizes landscape restoration as a cost-effective nature-based solution and that supports countries in addressing their remaining needs, challenges, and barriers.

     

Climate change and human health in Latin America: drivers, effects, and policies

Many people would be increasingly affected by living under critical conditions in Latin America if, as expected, global warming aggravates disease and pest transmission processes. Heat waves and air pollution would increase heat-related diseases and illness episodes in large cities. Fire smoke has been associated with irritation of the throat, lung and eyes, and respiratory problems. Climate extreme increases associated with climate change would cause physical damage, population displacement, and adverse effects on food production, freshwater availability and quality. It would also increase the risks of infectious and vector-borne diseases. Climate change impacts the geographical range, seasonality, and the incidence rate of vector-borne diseases, such as malaria. Climate-related ecological changes may expand cholera transmission, particularly among populations in low-laying tropical coastal areas. El Niño conditions may affect the incidence of infectious diseases, such as malaria. Ocean warming would increase temperature-sensitive toxins produced by phytoplankton, which could cause more frequent contamination of seafood. A clearer understanding on the current role of climate change in disease patterns will be able to improve forecasts of potential future impacts of projected climate change and support action to reduce such impacts.     

Modeling lead bioavailability and bioaccumulation by Lumbriculus variegatus using artificial particles. Potential use in chemical remediation processes

Artificial particles, specifically a diverse selection of chromatographical resins, have been recommended and used as a useful experimental model to predict the bioavailability and bioaccumulation of sediment-bound organic chemicals. In this work the same experimental model was adopted to investigate the bioavailability and bioaccumulation of lead by the freshwater oligochaete Lumbriculus variegatus. Particle-water partition coefficients were also determined. Sand particles and the anionic exchange resin promoted a similar uptake and bioaccumulation of lead. Instead, in the presence of the cationic exchanger the metal was not detected in the animals. For neutral particles, the uptake and accumulation depended on the chemistry of the functional groups at the active sites. In addition, a significant negative correlation was found between bioaccumulation and the particle-water partition coefficients. These studies may help to develop alternative methods for chemical remediation of lead-contaminated aquatic systems.     

Copper binding by peat fulvic and humic acids extracted from two horizons of an ombrotrophic peat bog

We studied the binding of Cu(II) to humic acids and fulvic acids extracted from two horizons of an ombrotrophic peat bog by metal titration experiments at pH 4.5, 5.0, 5.5, and 6.0 and 0.1 M KNO3 ionic strength. Free metal ion concentrations in solution were measured using an ion selective electrode. The amounts of base required to maintain constant pH conditions were recorded and used to calculate H+/Cu2+ exchange ratios. The amount of Cu(II) bound to the humic fractions was greater than the amount bound to the fulvic fractions and only at the highest concentrations of metal ion the amount of Cu(II) sorbed by both fractions became equal. The proton to metal ion exchange ratios are similar for all humic substances, with values ranging from 1.0 to 2.0, and decreasing with increased pH. The amount of Cu(II) bound is practically independent of the horizon from which the sample was extracted. The results indicate that the humic substances show similar cation binding behaviour, despite the differences in chemical composition. The copper binding data are quantitatively described with the NICA-Donnan model, which allows to characterize only the carboxylic type binding sites. The values of the binding constants are higher for the humic acids than for the fulvic acids.     

Effects of initial saturation on properties modification and displacement of tetrachloroethene with aqueous isobutanol

Packed column experiments were conducted to study effects of initial saturation of tetrachloroethene (PCE) in the range of 1.0-14% pore volume (PV) on mobilization and downward migration of the non-aqueous phase liquid (NAPL) product upon contact with aqueous isobutanol ( approximately 10 vol.%). This study focused on the consequences of swelling beyond residual saturation. Columns were packed with mixtures of neat PCE, water and glass beads and waterflooded to establish a desired homogeneous residual saturation, and then flooded with aqueous isobutanol under controlled hydraulic conditions. Results showed a critical saturation of approximately 8% PV for these packed column experimental conditions. At low initial PCE saturations (<8% PV), experimental results showed reduced risk of NAPL-product migration upon contact with aqueous isobutanol. At higher initial PCE saturations (>8% PV), results showed NAPL-product mobilization and downward migration which was attributed to interfacial tension (IFT) reduction, swelling of the NAPL-product, and reduced density modification. Packed column results were compared with good agreement to theoretical predictions of NAPL-product mobilization using the total trapping number, N(T). In addition to the packed column study, preliminary batch experiments were conducted to study the effects of PCE volumetric fraction in the range of 0.5-20% on density, viscosity, and IFT modification as a function of time following contact with aqueous isobutanol ( approximately 10 vol.%). Modified NAPL-product fluid properties approached equilibrium within approximately 2 h of contact for density and viscosity. IFT reduction occurred immediately as expected. Measured fluid properties were compared with good agreement to theoretical equilibrium predictions based on UNIQUAC. Overall, this study demonstrates the importance of initial DNAPL saturation, and the associated risk of downward NAPL-product migration, in applying alcohol flooding for remediation of DNAPL contaminated ground water sites.     

Dip-angle influence on areal DNAPL recovery by co-solvent flooding with and without pre-flooding

A two-dimensional (2D) laboratory model was used to study effects of gravity on areal recovery of a representative dense non-aqueous phase liquid (DNAPL) contaminant by an alcohol pre-flood and co-solvent flood in dipping aquifers. Recent studies have demonstrated that injection of alcohol and co-solvent solutions can be used to reduce in-situ the density of DNAPL globules and displace the contaminant from the source zone. However, contact with aqueous alcohol reduces interfacial tension and causes DNAPL swelling, thus facilitating risk of uncontrolled downward DNAPL migration. The 2D laboratory model was operated with constant background gradient flow and a DNAPL spill was simulated using tetrachloroethene (PCE). The spill was dispersed to a trapped, immobile PCE saturation by a water flood. Areal PCE recovery was studied using a double-triangle well pattern to simulate a remediation scheme consisting of an alcohol pre-flood using aqueous isobutanol ( approximately 10% vol.) followed by a co-solvent flood using a solution of ethylene glycol (65%) and 1-propanol (35%). Experiments were conducted with the 2D model oriented in the horizontal plane and compared to experiments at the 15 degrees and 30 degrees dip-angle orientations. Injection was applied either in the downward or upward direction of flow. Experimental results were compared to theoretical predictions for flood front stability and used to evaluate effects of gravity on areal PCE recovery. Sensitivity experiments were performed to evaluate effects of the alcohol pre-flood on PCE areal recovery. For experiments conducted with the alcohol pre-flood and the 2D model oriented in the horizontal plane, results indicate that 89-93% of source zone PCE was recovered. With injection oriented downward, results indicate that areal PCE recovery was 70-77% for a 15 degrees dip angle and 57-59% for a 30 degrees dip angle. With injection oriented upward, results indicate that areal PCE recovery was 57-60% at the 30 degrees dip angle, which was similar to PCE recovery for injection in the downward flow direction. Lower areal PCE recovery at greater dip angles in either direction of flow was attributed to DNAPL swelling and migration, flood front instabilities and bypassing of the displaced fluid past the extraction wells during the alcohol pre-flood. Additional results demonstrate that the use of an alcohol pre-flood can be beneficial in improving DNAPL recovery in the horizontal orientation, but pre-flooding may reduce areal recovery efficiency in dip-angle orientations. This study also demonstrates the use of theoretical perturbation (fingering) analysis in predicting NAPL recovery efficiency for flooding processes in remediating aquifers with dip angles.     

Evaluation of heavy metal acute toxicity and bioaccumulation in soil ciliated protozoa

Laboratory toxicity tests, using ciliated protozoa, are scarce and they have been carried out usually with freshwater species. In this study, we have analysed the acute cytotoxicity of Cd, Zn and Cu in five different strains of very common soil ciliate species (Colpoda steinii, Colpoda inflata and Cyrtolophosis elongata), which were isolated from very different soil samples (polluted or not with heavy metals). Soil ciliates are quite resistant to heavy metals pollution with regard to ciliates from other habitats. The toxicity sequence was Cd>Cu>Zn. Results from Cd+Zn mixtures indicated that Cd cytotoxicity decreases in the presence of low or moderate Zn concentrations. A broad heavy metal resistance level diversity exists among isolates of colpodid ciliates and it is seen to be a genetic feature rather than a habitat dependence. Bioaccumulation is seen to be the main mechanism involved in the metal resistance, except for Cu. For the first time in ciliates, a fluorescent method has been applied to detect Zn intracellular deposits. This methodology might be an useful tool for monitoring heavy metal pollution in soils.