Chemical composition, sources, solubility, and transport of aerosol trace elements in a tropical region

Aerosol particle samples (PM10) were collected at urban, industrial and rural sites located in Rio de Janeiro, Brazil, between October 2008 and September 2009. Aerosol samples for each site were analyzed for total and soluble metals, water-soluble ions, carboxylic acids, and water-soluble organic carbon (WSOC). The results showed that the mean PM10 concentrations were 34 μg m(-3); 47 μg m(-3) and 71 μg m(-3) at the rural, urban and industrial sites, respectively. An increase in the average concentration of these particles due to air stagnation was observed during the period from May to September for all sites, and an increase in hospitalization for respiratory problems was also reported. On average, the anions species represented 4 to 14% of total content, while cations species corresponded to 1 to 11% and 7.5% for WSOC. The overall metal content at the industrial site was nearly the double that at the rural site. The concentrations of the studied species are influenced mainly by site location and the specific characteristics present at each site. However, higher concentrations of some species were observed on particular dates and were probably due to biomass burning and African dust events. The acid/aqueous percentiles showed that the most efficiently extracted metals from the aqueous phase were V and Ni (40%), while Al and Fe represented a lower percentage (<3%). Analysis of the aqueous fraction provides important information about the bioavailability of metals that is associated with the inflammatory process in the lungs.     

Treatment of tannery effluent by chemical coagulation combined with batch-recirculated electro-oxidation at different anode materials

Environmental Science and Pollution Research - The aim of this work was to evaluate the pollutant load from tannery effluents treated by chemical coagulation (CC) followed by electro-oxidation...     

Four challenges when conducting bibliometric reviews and how to deal with them

Environmental Science and Pollution Research - The evidence base in environmental sciences is increasing steadily. Environmental researchers have been challenged to handle massive volumes of data...     

Relative bioavailability to laying hens of indicator polychlorobiphenyls present in soil

Transfer of indicator polychlorobiphenyls (PCBs) from soil into hen eggs may occur in hens reared outdoor, which ingest significant amounts of soil. This transfer depends on the bioavailability of the ingested compounds. The impact of soil on the bioavailability of indicator PCBs was assessed by means by a relative bioavailability (RBA) trial, in which their deposition in egg yolk and in abdominal fat, in response to their ingestion through contaminated-soil and through spiked-oil were compared. A sandy soil (709 μg indicator PCBs kg⁻¹ dry matter) was collected in the vicinity of a former fire involving treated wood. Twenty-eight laying hens were individually housed and fed one of the seven experimental diets during 14 d. The seven experimental diets were an uncontaminated control diet, three diets in which contaminated soil was introduced at levels of 3%, 6% and 9% and three diets in which spiked oil was introduced to achieve similar levels and profile of contaminants. Yolk, abdominal fat and liver were collected at the end of exposure. Indicator PCBs were extracted by ASE (Accelerated Solvent Extraction) and analyzed by GC-HMRS. Within each ingested matrix, the concentration of indicator PCBs in yolk and in abdominal fat linearly increased with the amount of indicator PCB ingested (P < 0.001). Except for PCB 28, the slopes of the responses to soil and to oil could not be differentiated (P > 0.1). RBA estimates did not differ from 1 for all indicator PCBs except for PCB 28, for which it was 0.58-0.59. Measurements performed on liver confirm these conclusions.     

Analysis of indoor gaseous formic and acetic acid, using radial diffusive samplers

A diffusive sampling method for the determination of gaseous acetic and formic acids, using a radial symmetry diffusive sampler, has been optimised for a 7-day exposure time in this study. Sampling rate determinations were performed on data obtained from a dynamic exposure chamber, simulating the indoor conditions of an empty, closed, room, at room temperature and minimal wind speed. Analysis has been performed by means of ion chromatography. The sampling rates for formic acid concentrations of 128 microg m(-3) and 1248 microg m(-3) were determined to be 91.2 +/- 3.9 ml min(-1) and 111.6 +/- 2.8 ml min(-1), respectively. The acetic acid sampling rate was independent of the concentration in the range 160 microg m(-3)-1564 microg m(-3), and amounted to 97.3 +/- 3.1 ml min(-1). Experimentally determined sampling rates showed deviations of 3% for acetic acid, and 3-21% for formic acid, in relation to theoretically derived values. The blank values were as low as 1.69 +/- 0.07 microg for formic acid and 1.21 +/- 0.14 microg for acetic acid, and detection limits lower than 0.5 microg m(-3) could be achieved, which is an improvement of 98-99% compared to previously validated diffusive sampling methods. This study describes the first step of an extended validation program in which the applicability of these types of samplers for the measurement of organic acids will be validated and optimised for the environmental conditions typical for museum showcases.     

New trends in the analytical determination of emerging contaminants and their transformation products in environmental waters

Since the so-called emerging contaminants were established as a new group of pollutants of environmental concern, a great effort has been devoted to the knowledge of their distribution, fate and effects in the environment. After more than 20 years of work, a significant improvement in knowledge about these contaminants has been achieved, but there is still a large gap of information on the growing number of new potential contaminants that are appearing and especially of their unpredictable transformation products. Although the environmental problem arising from emerging contaminants must be addressed from an interdisciplinary point of view, it is obvious that analytical chemistry plays an important role as the first step of the study, as it allows establishing the presence of chemicals in the environment, estimate their concentration levels, identify sources and determine their degradation pathways. These tasks involve serious difficulties requiring different analytical solutions adjusted to purpose. Thus, the complexity of the matrices requires highly selective analytical methods; the large number and variety of compounds potentially present in the samples demands the application of wide scope methods; the low concentrations at which these contaminants are present in the samples require a high detection sensitivity, and high demands on the confirmation and high structural information are needed for the characterisation of unknowns. New developments on analytical instrumentation have been applied to solve these difficulties. Furthermore and not less important has been the development of new specific software packages intended for data acquisition and, in particular, for post-run analysis. Thus, the use of sophisticated software tools has allowed successful screening analysis, determining several hundreds of analytes, and assisted in the structural elucidation of unknown compounds in a timely manner.     

Quality of the surface water of a basin affected by the expansion of the agricultural frontier over the native forest in the Argentine Espinal region

Environmental Science and Pollution Research - Land use changes have led to the degradation of multiple ecosystem services and affected the quality of aquatic ecosystems. The aims of this study...     

Prioritizing species conservation programs based on IUCN Green Status and estimates of cost-sharing potential

Over 1 million species around the world are at risk of extinction, and conservation organizations have to decide where to invest their limited resources. Cost-effectiveness can be increased by leveraging funding opportunities and increasing collaborative partnerships to achieve shared conservation goals. We devised a structured decision-making framework to prioritize species’ conservation programs based on a cost–benefit analysis that takes collaborative opportunities into account in an examination of national and global conservation return on investment. Conservation benefit is determined by modifying the novel International Union for the Conservation of Nature Green Status for Species to provide an efficient, high-level measure that is comparable among species, even with limited information and time constraints. We applied this prioritization approach to the Wilder Institute/Calgary Zoo, Canada, a nonprofit organization seeking to increase the number of species it assists with conservation translocations. We sought to identify and prioritize additional species’ programs for which conservation translocation expertise and actions could make the most impact. Estimating the likelihood of cost-sharing potential enabled total program cost to be distinguished from costs specific to the organization. Comparing a benefit-to-cost ratio on different geographic scales allowed decision makers to weigh alternative options for investing in new species’ programs in a transparent and effective manner. Our innovative analysis aligns with general conservation planning frameworks and can be adapted for any organization.     

Lead contamination of the Seine River, France: geochemical implications of a historical perspective

Four sediment cores collected in the Seine River basin and dated between 1916 and 2003 were analyzed for lead concentrations and isotopic composition. In all four cores, the measured Pb concentration (up to 460 mg kg⁻¹) lies significantly above the natural background (27-40 mg kg⁻¹), although a significant decrease (down to 75 mg kg⁻¹) was observed during the second half of the 20th century which can be explained by the reduction of lead emissions. The ²⁰⁶Pb/²⁰⁷Pb ratio measured in these samples indicates that the main source of Pb used in the Paris conurbation is characterized by a “Rio Tinto” signature (defined as ²⁰⁶Pb/²⁰⁷Pb = 1.1634 ± 0.0001). A high contribution, up to 25%, from the leaded gasoline (characterized by ²⁰⁶Pb/²⁰⁷Pb = 1.08 ± 0.02) is revealed in the Seine River downstream Paris, indicating that lead from the leaded gasoline is preferentially released to the river.The dominating Pb signature in the Paris conurbation that is currently sampled through incinerators fumes (²⁰⁶Pb/²⁰⁷Pb = 1.1550 ± 0.0005) and waste water treatment plant (²⁰⁶Pb/²⁰⁷Pb = 1.154 ± 0.002), represents a mixture of highly recycled lead from the Rio Tinto mine and lead from leaded gasoline (imprinted by the low ²⁰⁶Pb/²⁰⁷Pb of the Broken Hill mine). This signature is called “urban” rather than “industrial”, because it is clearly distinct from the Pb that is found in areas contaminated by heavy industry, i.e. the heavy industries located on the Oise River which used lead from European ores characterized by high ²⁰⁶Pb/²⁰⁷Pb ratios (∼1.18-1.19) and possibly a minor amount of North American lead (²⁰⁶Pb/²⁰⁷Pb ratios > 1.20). The “urban” signature is also found in a rural area upstream of Paris in the 1970’s. At the Seine River mouth in 2003, Pb with an urban signature represents 70% of the total Pb sediment content, with the 30% remaining corresponding to natural Pb.