Sexual selection, feather breakage and parasites: the importance of white spots in the tail of the barn swallow (Hirundo rustica)

The long outermost tail feathers of barn swallows Hirundo rustica have white spots that are larger in males than in females and in adults than in juveniles. Spot size increases with age among adults and is positively correlated with tail length. We tested the functional significance of these white spots by randomly assigning males to either of three groups during spring: (1) subjected to a considerable reduction in the size of all spots using a black permanent pen; (2) subjected to a small reduction in the size of all spots; or (3) a control group with no reduction. Experimental treatment significantly affected the total number of offspring produced per season: breeding tended to be delayed and second broods were less frequent after a considerable reduction in the size of the males' tail feather spots. White parts of feathers lacking melanin were more often found to be the site of feather breakage than the melanised parts of similar width. Furthermore, white tail spots were the preferred feeding site of feather-eating Mallophaga and, since long-tailed males have fewer Mallophaga than short-tailed males, long-tailed males may pay a lower cost for their large white tail spots than short-tailed males. Hence, the cost of increased risk of feather breakage at white tail spots and the non-random distribution of feather lice among individuals will render tail spots a reliable signal of phenotypic quality. Received: 25 May 1998 / Accepted after revision: 4 January 1998     

The variation of street air levels of PAH and other mutagenic PAC in relation to regulations of traffic emissions and the impact of atmospheric processes

The occurrence of particle associated PAH and other mutagenic PAC was determined in 1996 in the street air of Copenhagen. In addition, particle extracts were tested for mutagenicity. The measurements were compared with previous measurements in 1992/1993. The levels had decreased in this period. The decrease was caused by an implementation of light diesel fuels for buses and the exchange of older petrol-driven passenger cars with catalystequipped new ones. About 65% of the reduction was caused by the application of the light diesel fuels. Under special conditions, chemical processes in the atmosphere produced many more mutagens than the direct emissions. The concentrations of S-PAC and N-PAC were 10 times lower than those of PAH, while the levels of oxy-PAH were in the same order of magnitude as those of PAH. Benzanthrone, an oxy-PAH, is proposed to be formed in the atmosphere in addition to direct emissions. Benzo(a)pyrene, often applied as an air quality criteria indicator, was photochemically degraded in the atmosphere. A strong increase in the mutagenic activities was observed to coincide with a depletion of benzo(a)pyrene.     

Factors influencing PM10 emissions from road pavement wear

Accelerated pavement wear is one of the major environmental disadvantages of studded tyres in northern regions and results in increased levels of PM₁₀. Measurements of PM₁₀ in a road simulator hall have been used to study the influence of pavement properties, tyre type and vehicle speed on pavement wear. The test set-up included three different pavements (one granite and two quartzite with different aggregate sizes), three different tyre types (studded, non-studded, and summer tyres) and different speeds (30–70 km h^?1). The results show that the granite pavement was more prone to PM₁₀ production compared to the quartzite pavements. Studded winter tyres yield tens of times higher PM₁₀ concentrations compared to non-studded winter tyres. Wear from summer tyres was negligible in comparison. It was also shown that wear is strongly dependent on speed; every 10 km h^?1 increase yielded an increase of the PM₁₀ concentration of 680 μg m^?3 in one of the simulator experiments.     

Re-cycling of remediated soil - Evaluation of leaching tests as tools for characterization

In Sweden, leaching tests with deionized water (D.W.) are utilized in risk assessment of materials entering landfills, but implementation of these results to evaluate the risk of spreading of pollutants in the environment is difficult. One problem is that most leaching procedures only consider heavy metals release, whereas organic pollutants are left out. The aim of the present study was to assess the possible pollutant mitigation in four remediated soils, three with heavy metals and one with polycyclic aromatic hydrocarbons (PAH) contamination. The mitigation was evaluated by standardized batch and column leaching tests utilizing three different leaching solutions: D.W., a weak ionic solution (0.001 M CaCl₂) and an artificially made soil water (ASW). In general, batch leaching tests implied larger contaminant removal than column leaching test, possibly due to the more rough treatment of the soil particles, and guidelines would at times be exceeded by the batch leaching test but not by column leaching tests. Utilization of CaCl₂ was found to release less heavy metal than D.W., whereas the metals mobilized by ASW were removed from solution by the filtration of soil leachates. Low molecular weight PAH was most efficiently mobilized by CaCl₂, while D.W. worked better for high molecular weight PAH. Despite very low initial PAH-concentrations, tap- and groundwater criteria were exceeded by all leaching solutions.     

How to assess exposure of aquatic organisms to manufactured nanoparticles?

Ecological risk of chemicals is measured by the quotient of predicted no-effect concentrations and predicted exposure concentrations, which are hard to assess for manufactured nanomaterials (NMs). This paper proposes modifications to currently used models, in order to make them suitable for estimating exposure concentrations of NMs in the aquatic environment. We have evaluated the adequacy of the current guidance documents for use with NMs and conclude that nano-specific fate processes, such as sedimentation and dissolution need to be incorporated. We have reviewed the literature on sedimentation and dissolution of NMs in environmentally relevant systems. We deduce that the overall kinetics of water-sediment transport of NMs should be close to first order. The lack of data on dissolution of NMs under environmentally realistic conditions calls for a pragmatic decision on which rates to be used in modeling. We find that first order removal kinetics for dissolution seems adequate. Based on limited data from literature, probable removal rates range from 0 to 10(-4)s(-1) for sedimentation, and from 0 to 10(-5)s(-1) for dissolution. Further experimental data at environmentally relevant conditions for sedimentation and dissolution of NMs is needed.     

Degradability of aged aquatic suspensions of C60 nanoparticles

In this study, aged aqueous suspensions of C(60) (nC(60)) were investigated in the respirometric OECD test for ready biodegradability. Two suspensions of nC(60) were prepared by stirring and aged under indirect exposure to sunlight for 36 months. ATR-FTIR analyses confirmed the presence of C(60)-structures in the suspensions. Samples of the nC(60) suspensions (20mg/l) were inoculated with activated sludge (30 mgTSS/L) and incubated in a mineral medium under aerobic conditions. Since no mineralisation of nC(60) was observed after 28 days of incubation, 5mg/l sodium acetate was added to the media. After additional 20 days, no mineralisation of nC(60) was observed. However, within a few days sodium acetate was completely mineralised, showing that the biomass was not inhibited by the presence of nC(60). Based on results from this simple approach, aged nC(60) can be classified as not ready biodegradable according to the standard OECD test procedure.     

160 h of chemical-looping combustion in a 10 kW reactor system with a NiO-based oxygen carrier

Chemical-looping combustion, CLC, is a technology with inherent separation of the greenhouse gas CO₂. The technique uses an oxygen carrier made up of particulate metal oxide to transfer oxygen from combustion air to fuel. In this work, an oxygen carrier consisting of 60% NiO and 40% NiAl₂O₄ was used in a 10 kW CLC reactor system for 160 h of operation with fuel. The first 3 h of fuel operation excepted, the test series was accomplished with the same batch of oxygen carrier particles. The fuel used in the experiments was natural gas, and a fuel conversion to CO₂ of approximately 99% was accomplished. Combustion conditions were very stable during the test period, except for the operation at sub-stoichiometric conditions. It was shown that the methane fraction in the fuel reactor exit gas was dependent upon the rate of solids circulation, with higher circulation leading to more unconverted methane. The carbon monoxide fraction was found to follow the thermodynamical equilibrium for all investigated fuel reactor temperatures, 660–950 °C. Thermal analysis of the fuel reactor at stable conditions enabled calculation of the particle circulation which was found to be approximately 4 kg/s, MW. The loss of fines, i.e. the amount of elutriated oxygen carrier particles with diameter <45 μm, decreased during the entire test period. After 160 h of operation the fractional loss of fines was 0.00022 h⁻¹, corresponding to a particle life time of 4500 h.     

Prediction of odor from pig production based on chemical odorants

The present work was performed to investigate the use of odorant measurements for prediction of odor concentration in facilities with growing-finishing pigs and to analyze the odorant composition in facilities with different floor and ventilation systems. Air was sampled in Nalophan bags, odor concentrations were measured by dilution-to-threshold olfactometry, and concentrations of odorants were measured by proton-transfer-reaction mass spectrometry (PTR-MS). Olfactometry and chemical analyses were synchronized to take place at identical time intervals after sampling. A principal component analysis revealed that different facilities for growing-finishing pigs can be distinguished based on the odorants. Pit ventilation comprising a small amount of the total ventilation air (10-20%) in facilities with both room and pit ventilation can be used to concentrate odorants, whereas the room ventilation contains lower concentrations of most odorants. A partial least squares regression model demonstrated that prediction of the odor concentration based on odorants measured by PTR-MS is feasible. Hydrogen sulfide, methanethiol, trimethylamine, and 4-methylphenol were identified as the compounds having the largest influence on the prediction of odor concentration, whereas carboxylic acids had no significant influence. In conclusion, chemical measurement of odorants by PTR-MS is an alternative for expressing the odor concentration in facilities with growing-finishing pigs that can be used to increase the understanding of odor from different types of facilities and improve the development of odor reduction technologies.