Identification and Characterization of Potential Discharge Areas for Radionuclide Transport by Groundwater from a Nuclear Waste Repository in Sweden

This paper describes solute transport modeling carried out as a part of an assessment of the long-term radiological safety of a planned deep rock repository for spent nuclear fuel in Forsmark, Sweden. Specifically, it presents transport modeling performed to locate and describe discharge areas for groundwater potentially carrying radionuclides from the repository to the surface where man and the environment could be affected by the contamination. The modeling results show that topography to large extent determines the discharge locations. Present and future lake and wetland objects are central for the radionuclide transport and dose calculations in the safety assessment. Results of detailed transport modeling focusing on the regolith and the upper part of the rock indicate that the identification of discharge areas and objects considered in the safety assessment is robust in the sense that it does not change when a more detailed model representation is used.     

Conceptual and Numerical Modeling of Radionuclide Transport and Retention in Near-Surface Systems

Scenarios of barrier failure and radionuclide release to the near-surface environment are important to consider within performance and safety assessments of repositories for nuclear waste. A geological repository for spent nuclear fuel is planned at Forsmark, Sweden. Conceptual and numerical reactive transport models were developed in order to assess the retention capacity of the Quaternary till and clay deposits for selected radionuclides, in the event of an activity release from the repository. The elements considered were carbon (C), chlorine (Cl), cesium (Cs), iodine (I), molybdenum (Mo), niobium (Nb), nickel (Ni), radium (Ra), selenium (Se), strontium (Sr), technetium (Tc), thorium (Th), and uranium (U). According to the numerical predictions, the repository-derived nuclides that would be most significantly retained are Th, Ni, and Cs, mainly through sorption onto clays, followed by U, C, Sr, and Ra, trapped by sorption and/or incorporation into mineral phases.     

Sustainable management of demolition waste—an integrated model for the evaluation of environmental, economic and social aspects

A model is presented for evaluating waste management systems for their contribution to a sustainable development, including environmental, economic and social aspects. The model was tested in a case-study, where groups of long-term unemployed people were offered both education on environmental issues and practical work with the recovery and recycling of building and demolition waste as a form of vocational development. Application of the suggested model revealed the overall effects on sustainability of different methods of waste management. In addition, negative aspects of the systems analysed were identified, which led to discussions about possible improved practices within the waste management systems. Two of the waste management systems investigated (the recycling of steel and re-use of sanitary porcelain) showed a potential contribution to sustainable development in all of the aspects studied. Preparing bricks for re-use showed the largest potential for eco-efficiency, but had negative effects on sustainability from the social perspective of health and the working environment. The possibility of further use of the model and the remaining obstacles to such analyses are discussed. One observation is that the data collection needed to perform this kind of sustainability analysis is resource-demanding, and that it would therefore be better to identify a smaller number of key indicators.     

Grading of Parameters for Urban Tree Inventories by City Officials, Arborists, and Academics Using the Delphi Method

Tree inventories are expensive to conduct and update, so every inventory carried out must be maximized. However, increasing the number of constituent parameters increases the cost of performing and updating the inventory, illustrating the need for careful parameter selection. This article reports the results of a systematic expert rating of tree inventories aiming to quantify the relative importance of each parameter. Using the Delphi method, panels comprising city officials, arborists, and academics rated a total of 148 parameters. The total mean score, the top ranking parameters, which can serve as a guide for decision-making at practical level and for standardization of tree inventories, were: Scientific name of the tree species and genera, Vitality, Coordinates, Hazard class, and Identification number. The study also examined whether the different responsibilities and usage of urban tree databases among organizations and people engaged in urban tree inventories affected their prioritization. The results revealed noticeable dissimilarities in the ranking of parameters between the panels, underlining the need for collaboration between the research community and those commissioning, administrating, and conducting inventories. Only by applying such a transdisciplinary approach to parameter selection can urban tree inventories be strengthened and made more relevant.     

Life cycle assessment of waste paper management: The importance of technology data and system boundaries in assessing recycling and incineration

The significance of technical data, as well as the significance of system boundary choices, when modelling the environmental impact from recycling and incineration of waste paper has been studied by a life cycle assessment focusing on global warming potentials. The consequence of choosing a specific set of data for the reprocessing technology, the virgin paper manufacturing technology and the incineration technology, as well as the importance of the recycling rate was studied. Furthermore, the system was expanded to include forestry and to include fossil fuel energy substitution from saved biomass, in order to study the importance of the system boundary choices. For recycling, the choice of virgin paper manufacturing data is most important, but the results show that also the impacts from the reprocessing technologies fluctuate greatly. For the overall results the choice of the technology data is of importance when comparing recycling including virgin paper substitution with incineration including energy substitution. Combining an environmentally high or low performing recycling technology with an environmentally high or low performing incineration technology can give quite different results. The modelling showed that recycling of paper, from a life cycle point of view, is environmentally equal or better than incineration with energy recovery only when the recycling technology is at a high environmental performance level. However, the modelling also showed that expanding the system to include substitution of fossil fuel energy by production of energy from the saved biomass associated with recycling will give a completely different result. In this case recycling is always more beneficial than incineration, thus increased recycling is desirable. Expanding the system to include forestry was shown to have a minor effect on the results. As assessments are often performed with a set choice of data and a set recycling rate, it is questionable how useful the results from this kind of LCA are for a policy maker. The high significance of the system boundary choices stresses the importance of scientific discussion on how to best address system analysis of recycling, for paper and other recyclable materials.     

Spatial cost efficiency in waste paper handling: the case of corrugated board in Sweden

This paper analyzes the spatial cost efficiency of the Swedish legislation regarding waste disposal handling. We focus on the case of corrugated board and recognize that the different counties in Sweden possess different economic prerequisites in terms of waste paper recovery and utilization potential. We employ data for six corrugated board mills and 20 counties and a non-linear programming model to identify the least cost strategy for reaching the politically specified recycling target of a 65% recovery rate for corrugated board. That is, the total costs of recovering a minimum of 65% in each county are calculated and compared with the case when the country as a whole recovers 65% of all old corrugated board is collected but there exist no uniform target for each county. The conclusion is that from an efficiency point of view the recovery efforts should be concentrated to the highly populated and urbanized counties, and not be uniformly divided throughout the country. In the base case, the results suggest that the cost efficient county-specific recovery rates should range from 51 to 72%.     

Dealing with double-counting in tiered hybrid life-cycle inventories: a few comments – response

This paper is a response to a comment made by Lenzen [1] regarding a paper by Strømman et al. [2]. In this article I comment upon the proposals made by Lenzen. Through this, insights into challenges associated with path based methods in LCA are provided. In particular the application of these to correct for double counting in tiered hybrid LCA. A brief revisit of the rationale for the original work is provided. Key aspects of the methodology are discussed with outset in the comments in [1]. Finally, an assessment of the various approaches, including an option for further improvement is provided.     

Digit ratios (2D:4D), secondary sexual characters and cell-mediated immunity in house sparrows <Emphasis Type="Italic">Passer domesticus</Emphasis>

Homeobox genes regulate development of digits, and it has been suggested that the ratio of length of second to length of fourth digit reflects such genetic effects in a sex-specific manner. We show that digit ratios in the sexually dichromatic house sparrow Passer domesticus differ between sexes, with males having higher ratios than females, and that individuals produce consistent ratios on the two feet. If Homeobox or other genes had pleiotropic effects on development of digits, behavior, and physiology of males and females, we would expect secondary sexual characters and immunity to be related to digit ratio in a sex-specific manner. The size of the visible part of the black badge in February (a secondary sexual character), but not total badge size, was positively correlated with digit ratios, suggesting that males with more male-like digit ratios had larger visible badges. Because of sex-specific effects of development on secondary sexual characters and immunity, we predicted sex-specific differences in immune response to be related to digit ratio. House sparrows with large digit ratios had weaker T cell-mediated immune response than individuals with small digit ratios, particularly in females, implying that females with more male-like digit ratios had weak immune responses. These findings are consistent with the hypothesis that early development, as reflected by digit ratios, and genetics affect the expression of adult characters that are supposedly strongly contributing to fitness.     

Principles of microbial PAH-degradation in soil

Interest in the biodegradation mechanisms and environmental fate of polycyclic aromatic hydrocarbons (PAHs) is motivated by their ubiquitous distribution, their low bioavailability and high persistence in soil, and their potentially deleterious effect on human health. Due to high hydrophobicity and solid-water distribution ratios, PAHs tend to interact with non-aqueous phases and soil organic matter and, as a consequence, become potentially unavailable for microbial degradation since bacteria are known to degrade chemicals only when they are dissolved in water. As the aqueous solubility of PAHs decreases almost logarithmically with increasing molecular mass, high-molecular weight PAHs ranging in size from five to seven rings are of special environmental concern. Whereas several reviews have focussed on metabolic and ecological aspects of PAH degradation, this review discusses the microbial PAH-degradation with special emphasis on both biological and physico-chemical factors influencing the biodegradation of poorly available PAHs.     

Why it was so difficult to develop new methods to inspect work organization and psychosocial risks in Sweden

In 2001–2003, the Swedish Work Environment Authority (SWEA) ran a project to develop better methods to inspect psychosocial risk factors at work. The objective was twofold: to develop methods to enable most inspectors to effectively inspect such health risks, and to set a standard for method development within SWEA. This article presents our evaluation of the project and a discussion of this as an example of regulatory implementation. The methods project largely failed. Major reasons were the lack of general provisions on psychosocial risks, isolation from other policies in SWEA that affect the inspection of such risks, and a lack of engagement and guidance by top management on how to prioritize and conduct this very challenging development project. Underlying this was possibly a preoccupation with other major internal reforms, a limited competence and an unwillingness to challenge the employers on psychosocial and organizational issues within SWEA’s top management. Yet, the project probably had some indirect positive effects by raising awareness within the authority of psychosocial risk factors, of the complexities of inspecting such risks and of the difficulty to develop effective methods to supervise them.