Effect of copper on growth of an aquatic macrophyte,Elodea canadensis

Elodea canadensis has been proposed as a potential biomonitor due to its wide distribution and apparent ability to accumulate pollutants in aquatic ecosystems. We investigated the effects of copper sulfate on growth in E. canadensis to determine its effectiveness as a biomonitor of copper pollution in aquatic systems and whether growth is a suitable index of sub-lethal stress. Copper sulfate significantly slowed or stopped growth at all concentrations (low: 1 ppm, medium: 5 ppm, high: 10 ppm of copper sulfate) used. Final plant drymass was significantly lower in medium and high copper treatments compared with controls. E. canadensis appears to be very sensitive to copper levels, and may be useful as a biomonitor of copper levels in aquatic systems. However, its utility as a bioaccumulator may be limited, because we observed senescence of most leaves in all copper-treated plants following 4 weeks of treatment.     

Dioxins and furans formation in pilot incineration tests of sewage sludge spiked with organic chlorine

The factors affecting polychlorinated dibenzo-p-dioxins (PCDD) and polychlorinated dibenzofurans (PCDF) formation were studied in sewage sludge incineration tests carried out on a demonstrative plant. The plant includes a circulating fluidised bed furnace (FBF) and a rotary kiln furnace (RKF), operating alternatively. During the tests sewage sludge was spiked with chlorinated hydrocarbons and the operating parameters of the afterburning chamber were varied. PCDD/F were sampled in each test before the bag filter, thus collecting the above contaminants before abatement systems. From the tests it appeared that PCDD/F were always produced in more abundance in the tests carried out by FBF than by RKF. The higher PCDD/F concentrations in the tests by FBF were reached when sewage sludge was spiked with a high dosage of a surrogate organic mixture of chlorinated hydrocarbons and when the afterburning chamber was used only as transit equipment with the burner off. The distribution of the different PCDD/F homologues was compared. P5CDFs were generally the prevalent fraction, with very few exceptions for the tests by RKF at high temperature of the afterburning chamber. As for FBF tests, it was found that the PCDD/F homologue profile depends on the afterburning chamber temperature.     

One-year study of the elemental composition and source apportionment of PM10 aerosols in Florence, Italy

An extensive investigation was carried out for the characterisation of the air particulate composition in Florence. The aim was to determine the aerosol elemental concentrations, as well as to identify pollution sources. For our investigation, the external Particle-Induced X-Ray Emission-Particle-Induced gamma-Ray Emission beam facility of the Istituto Nazionale di Fisica Nucleare, Van de Graaff accelerator at the Physics Department of the Florence University was used. We report the results of the analysis of a long temporal series (approximately 1 yr) of PM10 particulate samples, collected on Millipore filters on a daily basis in three different sites (characterised by different urban settings). Daily concentrations of more than 20 elements were detected. The long sampling period (approximately 1 yr) allowed a comparison with the air quality recommended values and the identification of seasonal variations. Four main sources (traffic, oil-combustion, soil-dust, and wind transported sea-salt) were extracted with the help of Principal Component Analysis (PCA). An absolute PCA showed traffic to be the major source both in the high traffic site and in the urban background site.     

MEETING THE CHALLENGE OF POLICY-RELEVANT SCIENCE: LESSONS FROM A WATER RESOURCE PROJECT1

ABSTRACT: Water resource scientists face complex tasks in evaluating aspects of water projects, but relatively few assessment procedures have been applied and accepted as standard applications. Decision-makers often rely on environmental assessments to evaluate the value and operation of projects. There is often confusion about scientists' role in policy decisions. The scientist can affect policy-making as an expert withess, an advocate or a surrogate. By understanding the policy process, scientists can make their work more “policy relevant.” Using the Terror Lake hydro project in Alaska as a guide, three lessons are discussed: (1) not all problems are able to be solved with technology; (2) policy-relevant technology is rarely imposed on a problem; and (3) the scientist need not just react to the policy process, but can have an impact on how that process unfolds.     

Adsorption/Desorption of Polyvinyl Alcohol on Solid Substrates and Relevant Biodegradation

The rates and extents of absorption and desorption of polyvinyl alcohol (PVA) samples on different solid substrates comprising montmorillonite, quartz sand, and farm soil, as well as humic acid mixture are reported. The uptake of PVA by the substrates was analyzed as a function of PVA hydrolysis (72–98%), molecular weight, and molecular weight distribution. Higher adsorption was detected on montmorillonite followed by farm soil, whereas the quartz sand did not display any specific adsorption affinity for the PVA. An increase in the hydrolysis degree of PVA increased the adsorption rate and extent whereas this feature was reversed by an increase in PVA molecular weight. The desorption of PVA samples from the different substrates was performed both under various pH conditions and in the presence of concentrated HF that was used to dissolve the silicon derivatives present in the substrates. Biodegradation experiments carried out in liquid cultures of PVA adsorbed on montmorillonite showed that the mineralization of the adsorbed PVA was much lower than that detected for the nonadsorbed PVA. This investigation suggests that irreversible adsorption of PVA on the clay component occurs in soil, thus substantially inhibiting PVA biodegradation.     

Transport and metabolic fate of sewage particles in a recipient stream

Although the implementation of wastewater treatment plants (WWTP) has dramatically increased the quality of surface waters in urbanized areas, WWTPs can still discharge noticeable amounts of solutes and particles to recipient streams. Although the fate of WWTP nutrients has received considerable attention, transport and in-stream transformation of sewage-derived particulate organic matter (SDPOM) have not. To investigate the transport and transformation of SDPOM in recipient streams, we experimentally injected fluorescently labeled SDPOM into a headwater stream and tracked its downstream fate at baseflow. Most SDPOM disappeared from the streamwater within a 160-m long reach with an average deposition velocity of 0.14 mm s(-1). We further coupled hydrometric measurements of specific water fluxes through the streambed interface with a mixing model to estimate streambed oxygen removal, and found significantly higher oxygen removal in the deposition (0.75 g O2 m(-2) d(-1)) than in the downstream post-deposition (0.36 g O2 m(-2) d(-1)) subreach. Contrary to our expectations, we did not detect any apparent effect of SDPOM deposition on streambed clogging. Our results show the capacity of a recipient stream to retain SDPOM and to reduce its downstream export, and thus contribute to a better understanding of ecosystem services of human-altered streams.     

Evaluation of concentration efficiency of the Pseudomonas aeruginosa phage PP7 in various water matrixes by different methods

Enteric viruses monitoring in surface waters requires the concentration of viruses before detection assays. The aim of this study was to evaluate different methods in terms of recovery efficiencies of bacteriophage PP7 of Pseudomonas aeruginosa, measured by real-time PCR, using it as a viral control process in water analysis. Different nucleic acid extraction methods (silica–guanidinium thiocyanate, a commercial kit (Qiagen Viral RNA Kit) and phenol–chloroform with alcohol precipitation) exhibited very low recovery efficiencies (0.08–4.18 %), being the most efficient the commercial kit used for subsequent experiments. To evaluate the efficiency of three concentration methods, PBS (as model for clean water) and water samples from rivers were seeded to reach high (HC, 10⁶ pfu ml^?1) and low concentrations (LC, 10⁴ pfu ml^?1) of PP7. Tangential ultrafiltration proved to be more efficient (50.36?±?12.91, 17.21?±?9.22 and 12.58?±?2.35 % for HC in PBS and two river samples, respectively) than adsorption–elution with negatively charged membranes (1.00?±?1.34, 2.79?±?2.62 and 0.05?±?0.08 % for HC in PBS and two river samples, respectively) and polyethylene glycol precipitation (15.95?±?7.43, 4.01?±?1.12 and 3.91?±?0.54 %, for HC in PBS and two river samples, respectively), being 3.2–50.4 times more efficient than the others for PBS and 2.7–252 times for river samples. Efficiencies also depended on the initial virus concentration and aqueous matrixes composition. In consequence, the incorporation of an internal standard like PP7 along the process is useful as a control of the water concentration procedure, the nucleic acid extraction, the presence of inhibitors and the variability of the recovery among replicas, and for the calculation of the sample limit of detection. Thus, the use of a process control, as presented here, is crucial for the accurate quantification of viral contamination.