Analysis of short-chain chlorinated paraffins: a discussion paper

Short-chain chlorinated paraffins are a class of organic compounds widely used in many industrial applications, extensively diffused into the environment, persistent, bioaccumulative, and toxic towards aquatic organisms. However, their study and monitoring in the environment are still limited. Because of the enormous number of positional isomers that characterise their mixtures, the analysis of this class of pollutants is very difficult to perform. Beside this, the lack of certified reference materials poses a problem for the assessment of the quality assurance/quality control of any analytical procedure. At present, the scientific community does not agree on any analytical reference method, although the monitoring of short-chain chlorinated paraffins has already started in order to comply with the Water Framework Directive of the European Union on water quality. In this paper the regulatory framework, in which chlorinated paraffins are included, and the status concerning their determination are summarized. The main analytical difficulties still existing are discussed, and the definition of a method-defined parameter as well as the development of a standardised method are suggested as a way to obtain comparable monitoring data.     

Development of low-cost ammonia gas sensors and data analysis algorithms to implement a monitoring grid of urban environmental pollutants

The present study is focused on the implementation of a novel, low cost, urban grid of nanostructured chemresistor gas sensors for ammonia concentration ([NH(3)]) monitoring, with NH(3) being one of the main precursors of secondary fine particulate. Low-cost chemresistor gas sensors based on carbon nanotubes have been developed, their response to [NH(3)] in the 0.17-5.0 ppm range has been tested, and the devices have been properly calibrated under different relative humidity conditions in the 33-63% range. In order to improve the chemresistor selectivity towards [NH(3)], an Expert System, based on fuzzy logic and genetic algorithms, has been developed to extract the atmospheric [NH(3)] (with a sensitivity of a few ppb) from the output signal of a model chemresistor gas sensor exposed to an NO(2), NO(X) and O(3) gas mixture. The concentration of these pollutants that are known to be the most significant interfering compounds during ammonia detection with carbon nanotube gas sensors has been tracked by the ARPA monitoring network in the city of Milan and the historical dataset collected over one year has been used to train the Expert System.     

Polycyclic aromatic hydrocarbons in surface water and bed sediments of the Hungarian upper section of the Danube River

This study was performed to elucidate the distribution, concentration trend and possible source of polycyclic aromatic hydrocarbons (PAHs) in surface water and bed sediments of the Hungarian upper section of the Danube River and the Moson Danube branch. A total of 217 samples (water and sediments) were collected from four different sampling sites in the period of 2001–2010 and analysed for the 16 priority US Environmental Protection Agency PAHs. Concentrations of total 16 PAHs (∑PAHs) in water samples ranged from 25 to 1,208 ng/L, which were predominated by two- and three-ring PAHs. The ∑PAH concentrations in sediments ranged from 8.3 to 1,202.5 ng/g dry weight. Four-ring PAHs including fluoranthene and pyrene were the dominant species in sediment samples. A selected number of concentration ratios of specific PAH compounds were calculated to evaluate the possible sources of PAH contamination. The ratios reflected a pattern of pyrogenic input as a major source of PAHs. The levels of PAHs determined were compared with other sections of the Danube and other regions of the world.     

Concentrations of microcystins in tissues of several fish species from freshwater reservoirs and ponds

The aim of this study is to summarise the determination of concentrations of microcystins (MCs) in muscle and liver of freshwater fish species caught in stagnant waters of the Czech Republic. Within the years 2007–2009, 351 muscle samples and 291 liver samples of 16 freshwater fish species derived from four fishponds, and four water reservoirs were analysed. MCs were detected in 53 liver samples. The highest concentrations of microcystins were determined in liver samples of carnivorous fish species; 50.3 ng/g of fresh weight (FW) in perch (Perca fluviatilis) and 22.7 ng/g FW in pikeperch (Sander lucioperca). MCs in liver were detected in other five fish species; asp (Aspius aspius), pike (Esox lucius), common carp (Cyprinus carpio), grass carp (Ctenopharyngodon idella) and European eel (Anguilla anguilla). Concentrations of MCs in liver of nine fish species (European bream, whitefish, tench, silver carp, European catfish, roach, chub, crucian carp and rudd) were below the detection limit of 1.2–5.4 ng/g FW for different MC congeners. However, the concentrations of MCs in all muscle samples were below the detection limit. The assessment of MCs concentrations might be influenced by the detection method used. Due to the concentrations of MCs being below the detection limit in muscle samples of all fish species analysed, it seems that there might be a low potential threat for human health in case of fish muscle consumption.     

Emissions of reduced sulphur compounds from the surface of primary and secondary wastewater clarifiers at a Kraft Mill

Emissions of reduced sulphur compounds (RSCs) from the primary and secondary clarifiers at a Kraft mill were measured for respectively 8 and 22 days using a floating flux chamber. In the primary clarifier, dimethyl disulphide (DMDS) had the highest mean flux (0.83 microg s(-1) m(-2)) among all RSCs, and the mean flux of total reduced sulphur (TRS) was 1.53 microg s(-1) m(-2). At the secondary clarifier, dimethyl sulphide (DMS) had the highest mean flux (0.024 microg s(-1) m(-2)), and the mean flux of total reduced sulphur (TRS) was 0.025 microg s(-1) m(-2). Large variations in fluxes as a function of sampling date were observed in both clarifiers. Emission fluxes of DMS from the secondary clarifier were correlated with temperature in the flux chamber and with the biological and chemical oxygen demands (BOD and COD) of the wastewater. Emission rates of RSCs from the clarifiers were found to be insignificant by comparison with other mill sources.     

Cape Fear: monitoring basic hydrological processes in an outdoor hillslope plot

Cape Fear is an outdoor 7 × 7 m² hillslope laboratory located at the University of Tuscia, Viterbo, Italy, and is equipped with real-time monitoring sensors used to analyse runoff generation. In this paper, hydrological phenomena that occurred during Cape Fear’s first 2 years of operation are reported to provide insight into the basic dynamics underlying the hydrological response at the hillslope scale. Based on our findings, surface and subsurface runoff are likely driven by rainfall-threshold phenomena, and evapotranspiration phenomena account for more than 70% of rainfall water input. Future studies will investigate the threshold relationship between rainfall and runoff.     

Removal of fenhexamid and pyrimethanil from aqueous solutions by clays and organoclays

The ability of a sodium montmorillonite (CLONa) and two commercial available organoclays having interlayer organic cations possessing different functional groups (CLO20A and CLO30B) was investigated for adsorbing two pesticides namely fenexamid (FEX) and pyrimethanyl (PMT). The two organoclays displayed a higher affinity with the pesticides than the unmodified clay, but the improvement in adsorption capacity varied according to the characteristics of the pesticide and the interlayer organic cation. FEX was adsorbed to a greater extent than PMT by both organoclays, which may be due to the higher hydrophobicity of FEX thereby indicating considerable hydrophobic interaction between the adsorbent/adsorbate systems. Our findings may find application in the removal of water-soluble pesticides from aquifers.     

Sunlight-induced degradation of soil-adsorbed veterinary antimicrobials Marbofloxacin and Enrofloxacin

Marbofloxacin (MAR) and Enrofloxacin (ENR), two largely employed veterinary Fluoroquinolones (FQs), were found to be present at the micrograms per kilogram level in agricultural soils of South Lombardy (Italy) several months after manuring. Distribution coefficients (K_d) from sorption experiments indicated a strong binding to the soil. Soil samples fortified with environmentally significant FQs amounts (0.5 mg kg⁻¹) were exposed to solar light that promoted extensive degradation (80%) of both drugs in 60-150 h. Thus, photochemistry could be considered a significant depollution path in the soil, although it was two orders of magnitudes slower than in aqueous solution and a fraction of the drug (ca. 20%) remained unaffected. For MAR the photoprocess was the same as in solution, and involved cleavage of the tetrahydrooxadiazine ring. On the contrary, with ENR only some of the photoproducts determined in water (those arising from a stepwise oxidation of the piperazine side chain) were observed. Substitution of the 6-fluoro by a hydroxyl group and reduction did not occur in the soil, supporting the previous contention that such processes required polar solvation of FQs. Consistently with this rationalization, the irradiation of thin layers of solid drugs led to essentially the same products distribution as in the soil. From the environmental point of view it is important to notice that photodegradation mainly affects the side-chains, while the fluoroquinolone ring, to which the biological effect is associated, is conserved up to the later stages of the degradation.     

A Side‐by‐Side Comparison of Pervious Concrete and Porous Asphalt1

Welker, Andrea L., James D. Barbis, and Patrick A. Jeffers, 2012. A Side‐by‐Side Comparison of Pervious Concrete and Porous Asphalt. Journal of the American Water Resources Association (JAWRA) 48(4): 809‐819. DOI: 10.1111/j.1752‐1688.2012.00654.x Abstract: This article compares the performance of two permeable pavements, pervious concrete and porous asphalt, that were installed side‐by‐side in fall 2007. Because the pavements are located directly adjacent to one another, they experience the same vehicle loads, precipitation, and pollution loads. These permeable pavements are part of an infiltration stormwater control measure (SCM). This article focuses on the comparison of water quality parameters, maintenance and durability, and user perception. Eleven different water quality parameters were analyzed at this site for 19 different storm events over a one year period: pH, conductivity, total suspended solids, chlorides, total nitrogen, total phosphorus, total dissolved copper, total dissolved lead, total dissolved cadmium, total dissolved chromium, and total dissolved zinc. Results from the two pavement types were compared using the Mann–Whitney U‐test. The only parameter that was found to be statistically different between the two pavements was pH. Periodic inspection of the two pavement types indicated that after two years of use both pavements were wearing well. However, there was some evidence of clogging of both pavements and some evidence of surface wear. A survey of users of the lot indicated that the perception of these permeable pavements was favorable.     

Movement of trichloroethene in a discontinuous permafrost zone

At a site with discontinuous permafrost in Fairbanks, Alaska, releases of trichloroethene (TCE), an industrial solvent, have caused contamination of the groundwater. The objective of this study was to investigate the relationship between the migration pathway of the TCE groundwater plume and the distribution of the discontinuous permafrost at the site. The TCE plume configuration is substantially different than what regional hydrology trends would predict. Using GIS, we conducted a geostatistical analysis of field data collected during soil-boring installations and groundwater monitoring well sampling. With the analysis results, we constructed maps of the permafrost-table elevation (top of permafrost) and of the groundwater gradients and TCE concentrations from multiyear groundwater sampling events. The plume concentrations and groundwater gradients were overlain on the permafrost map to correlate permafrost locations with groundwater movement and the spatial distribution of TCE moving with groundwater. Correlation of the overlay maps revealed converging and diverging groundwater flow in response to the permafrost-table distribution, the absence of groundwater contamination in areas with a high permafrost-table elevation, and channeling of contaminants and water between areas of permafrost. In addition, we measured groundwater elevations in nested wells to quantify vertical gradients affecting TCE migration. At one set of nested wells down gradient from an area of permafrost we measured an upward vertical gradient indicating recharge of groundwater from the subpermafrost region of the aquifer causing dilution of the plume. The study indicates that the variable distribution of the permafrost is affecting the way groundwater and TCE move through the aquifer. Consequently, changes to the permafrost configuration due to thawing would likely affect both groundwater movement and TCE migration, and areas that were contaminant-free may become susceptible to contamination.