Environmental assessment of a Palette Modular Device for gold recovery from PVD

The novel “Palette Modular Device” (PMD) technology, addressing the recovery of wastes from Physical Vapour Deposition (PVD) maintenance, is evaluated according to a Life Cycle Assessent (LCA) approach. The PMD recovery technology was recently developed with the aim of an easier and more sustainable separation of the film layers used in PVD, with a particular emphasis on multi-material film productions, frequently adopted in the electronic industry. The PMD is briefly presented in the paper, along with three implementations for industrial purposes. Each implementation adopts a different light solvent for the metal recovery like acetone and formic acid. The usage of light solvents is a peculiar feature enabled by the system considered, as an alternative to traditional approaches. The LCA starts with the objectives and prosecutes with inventories of all material and energy flows for each different scenario considered. Additionally, a global impact assessment is provided in a specific section, in order to enable a quantitative comparison of the potential effects on the environment in every scenario. The results of this study allow the industrial designer to perform an overall environmental evaluation of the three strategies proposed and to compare the performances of the novel technology. The research, furthermore, highlights some critical points in the adoption of the PMD and suggests how to improve the implementation of this recovery process.     

Solubility and adsorption behaviors of chlorpyriphos-methyl in the presence of surfactants

In the present work changes in the adsorption of the pesticide chlorpyrifos-methyl (CLP-m) on soil colloids induced by application of surfactants were determined using a batch equilibrium method. The surfactants used were sodium dodecyl sulphate (SDS), Tween 20, and dihexadecyldimethylammonium bromide (DHAB). The adsorption isotherms of CLP-m in aqueous medium and in surfactant solutions at concentration equal to the critical micelle concentration (CMC) fitted the Freunlich adsorption equation generally with R² values greater than 0.96. While the addition of SDS and DHAB decreased the pesticide adsorption, the addition of Tween 20 increased the pesticide adsorption. The increases or decreases in the adsorption in the experiment revealed that the behavior of CLP-m in soil water-systems mainly depends on the type of surfactant. Moreover water solubility of CLP-m changes by the three surfactants below and above their CMC were studied. While the solubility of CLP-m was enhanced by SDS both below and above the CMC, the solubility of the pesticide was enhanced by DHAB only above the CMC. Tween 20 did not influence the solubility of CLP-m.     

The synthetic pyrethroid isomers II. Biological activity

Abstract

Pure optical isomers of phenothrin, permethin and cypermethrin were synthesised and tested on a wide spectrum of insects (Blattella germanica, Leptinotarsa decemlineata, Tribolium confusum, Oncopeltus fasciatus, Musca domestica, Aedes aegypti). Our results suggest that in the structurally related series phenothrin, permethrin and cypermethrin the chemical modifications had only a small influence on intrinsic activity of the compounds at the target site. The activity of piperonylbutoxide synergised 1Rtrans phenothrin and 1Rcis permethrin (LD₅₀=1.2 ng/fly in both cases) is in a similar range to the most active 1RcisS cypermethrin isomer alone or with PB (LD₅₀=0.9 and 0.4 ng/fly, respectively). Some cypermethrin isomers considered previously to be totally inactive show significant activity depending on the tested insect species. The 1ReisR and 1RtransR isomers proved to be as active as the most potent isomers on mosquito. A similarly unexpected result was that in the case of mosquito all four trans isomers were significantly more active than the corresponding eis isomers.

The superiority of the (S)‐α configuration over (R)‐α was found. It does not result from a higher intrinsic activity at the target site, but rather from the enhanced metabolic resistance of (S)‐α‐esters to ester cleavage as confirmed by Synergist studies. The activity of the two most potent stereoisomers, 1ReisS and 1RtransS, could not be elevated by quinalphos, while the inactive 1ScisR and 1StransR isomers showed significant activity with the esterase inhibitor quinalphos administered sublethally.

In contrast with the antagonism between (S)‐ and (R)‐α‐epimers of cypermethrin reported earlier a considerable synergism was observed between 1RtransS and 1StransR enantiomer pair on flour beetle and housefly in tarsal contact tests.

The results with stereoisomers and their mixtures were utilised in the development of two new products, Chinmix (beta‐cypermetrhin) and Transmix (theta‐cypermetrhin).     

Chemical and biomarker responses for site-specific quality assessment of the Lake Maggiore (Northern Italy)

Since the 1990s, the Lake Maggiore (Northern Italy) has been recognized as an aquatic environment contaminated by DDTs and other persistent organic pollutants, but to date just few studies were carried out to investigate the effects of pollution to aquatic organisms. The aim of this study was the application of a stepwise approach based on chemical data, a suite of biomarkers and the integration of their responses into a biomarker response index (BRI) to evaluate the site-specific quality assessment in different sampling stations of Lake Maggiore, one of the largest European lakes. We used as biological model the freshwater bivalve Zebra mussel (Dreissena polymorpha). Several hundred bivalve specimens were sampled on May 2011 from eight sampling sites located along the lake shoreline. We measured levels of DDTs, PCBs, HCHs, HCB, and PAHs accumulated in D. polymorpha soft tissues by GC/MSn, while the activities of catalase, superoxide dismutase, glutathione peroxidase, and glutathione S-transferase, as well as the lipid peroxidation and protein carbonyl content were evaluated in homogenates from native bivalves as oxidative stress indices. Moreover, DNA damage was investigated by the alkaline precipitation assay. Significant imbalances of enzymatic activity were found in mussels from most of the sampling sites, as well as notable increases of damage to macromolecules. Health status of mussels from Baveno was greatly affected by lake pollution, probably due to high levels of DDTs measured in this site, while a wide variability in biomarker responses was found in all the other stations. The application of a BRI allowed distinguishing impacts of pollution to bivalves, confirming mussels from Baveno as the most threatened and revealing that also the health status of bivalves from Suna, Brissago, Pallanza, and Laveno is affected. These evidences suggest the usefulness of a specific index to integrate all the biomarker endpoints in order to provide a correct environmental risk assessment.     

Effectiveness and kinetics of ferrate as a disinfectant for ballast water

This study examined whether ferrate could meet the international standards for successful ballast water treatment, including final concentrations of less than 1 CFU/mL of Enterococci, less than 2.5 CFU/mL of Escherichia coli, and less than 1 CFU/100 mL of Vibrio cholerae. Pure cultures of E. coli, Klebsiella pneumoniae, and V. cholerae, and a mixed culture of Enterococcus faecium and E. faecilis were grown in saline solution to simulate ballast water and were treated with dosages of ferrate ranging from 0.25 to 5.0 mg/L. A ferrate dose of 5 mg/L resulted in complete disinfection of all organisms tested, and smaller dosages were also very effective. Tailing was consistently observed, and the Hom's model (1972) appeared to most accurately represent the action of ferrate on these organisms. Salinity and pH did not adversely affect results, and regrowth was not a problem. Ferrate shows good potential as an effective disinfectant in the treatment of ballast water.     

National Prevention through Design (PtD) Initiative

INTRODUCTION: The most effective means of preventing and controlling occupational injuries, illness, and fatalities is to "design out" hazards and hazardous exposures from the workplace. There is a long history of designing for safety for the general public and to a lesser degree for workers. METHOD: We now have the experience and insight from thoughtful, previous efforts to call for a comprehensive national strategy to implement a Prevention through Design (PtD) Initiative. RESULTS: This paper describes that initiative in terms of four overarching areas where action can be directed: practice, policy, research, and education. To obtain stakeholder input for issues in these four areas and to focus implementation efforts, eight sector divisions of the economy will be addressed. A seven year strategy is envisioned.     

Investigation on the heavy-metal content of zinc-air button cells

Within the framework of a German government project (initiated by the Federal Environment Agency) to check the compliance of commercially available batteries with the German Battery Ordinance concerning their heavy metal contents, 18 different types of commercially available zinc-air button cells were analysed for their cadmium, lead and mercury contents. After microwave assisted dissolution with aqua regia, Cd and Pb were determined using inductively coupled plasma mass spectrometry (ICP-MS), and Hg was determined using inductively coupled plasma optical emission spectrometry (ICP OES) and atomic absorption spectrometry. Cd contents were found to be much lower than the permitted limits; Pb contents were also found to be below the limits. Hg contents were found to be near the limits, and in one case the limit was exceeded.     

Serum concentrations of indicator PCB congeners in the Czech adult population

In 2006, levels of seven indicator polychlorinated biphenyl congeners (PCB28, 52, 101, 118, 138, 153, and 180) in blood serum of 202 blood donors residing for more than 2 years in five urban areas included in the Czech Human Biomonitoring project were measured by GC/MS/MS method. PCB congeners 138, 153 and 180 accounted for about 97% of the sum of the indicator congeners analyzed. Overall, the median and 95th percentile of the most abundant congener PCB 153 were 438 ng/g lipid and 1079 ng/g lipid, respectively. The highest median levels were found in Uherské Hradiste (669 ng/g lipid) and Ostrava (672 ng/g lipid in males compared to 341 ng/g lipid in females). Serum PCB concentrations were significantly associated with age, gender, place of residence and smoking habit, but not with body mass index and education. The results suggest the importance of PCB body burden in the Czech general population and the existence of hot spots.     

Immissionsbelastungen im Umfeld des Flughafens München

The airborne immissions in the eastern surroundings to the new Munich airport have been investigated by means of different analytical methods between 1992 and 1995. For a detection of environmental impacts, bioindicators were applied to determine the pollution by PAH and to quantify the pollution by photooxidants. In addition, the PAH content in the upper soil layer was determined. During high pressure weather periods in summer the actual air pollution was investigated in the course of seven measuring campaigns. The PAH pollution of the soil is typical for rural background sites with highest concentrations in the close vicinity of busy roads, and exhibits no temporary trend. The actual input of PAH does not differ from the typical situation of rural regions in Bavaria at any measuring sites at all. Road traffic can be identified as the main PAH source in summer, whereas the considerably higher pollution in winter can be related to domestic heating. The pollution by photooxidants was found to be rather homogeneous throughout the eastern surroundings to the airport, being lowest at the sites directly influenced by road traffic. The pollution by volatile hydrocarbons at a busy road junction in the city of Erding is considerably higher than in the rural vicinity of the airport. The concentrations exhibit distinct daily courses which, among other things, can be related to atmospheric photooxidation. The hydroperoxides as secondary air pollutants exhibit an inverse course similar to that of ozone, with maximum values in the afternoon.