CO2-emission reduction in China’s residential building sector and contribution to the national climate change mitigation targets in 2020

Between 1980 and 2007, in the Chinese building sector in urban and rural areas, coal was mainly substituted with electricity and natural gas. Growing income will further increase energy consumption and CO₂-emissions in the building sector. Using an econometric model, disaggregated energy demand and related CO₂-emissions in the residential sector as well for the whole economy are estimated and forecasted until 2050. In 2009, the Chinese government pledged itself to reduce CO₂-intensity by 40%?C45% in 2020 compared to 2005. Aim of this article is to assess to which extent the measures in the building sector in China can contribute to this target. Main results of the analysis are: (a) The primary energy source coal was mainly substituted by electricity generated with coal. Apart from convenience gains, the environmental advantages are questionable. (b) Between 2010 and 2050, energy demand in the building sector will grow by 2.0%?C4.1% per annum leading to CO₂-emissions at least almost tripling from about 560 mill. tons in 2010 to about 1,500 mill. tons in 2050. (c) The energy efficiency gains in the building sector and other sectors of the Chinese economy, however, are not enough to fulfill the national CO₂-intensity targets. The reduction of the CO₂-intensity of GDP would be 37.2% in the BAU-scenario, and 31.9% in the LOW-scenario. Only in the HIGH-scenario (46.3%), the economy is growing efficient enough relative to the induced CO₂-emissions. The remaining CO2-emission reductions could be gained by additional promotion of renewable energies (mainly solar and geo-thermal) in the building sector.     

The fate of the herbicide propanil in plants of the littoral zone of the Three Gorges Reservoir (TGR), China

The anti-seasonal hydrology with 30 m water fluctuations in the Three Gorges Reservoir(TGR) of China attracts growing environmental and ecological concerns. We investigated the biotransformation of the herbicide propanil in plants dominating in the littoral zone of the TGR by applying the ~(14)C-ring-labeled herbicide into non-aseptic hydroponic plant systems(Cynodon dactylon, Nelumbo nucifera and Bidens pilosa), aseptic plants(Lemna minor and Lemna gibba) and cell suspension cultures(C. dactylon and L. minor).(1) Propanil absorbed in plants of the hydroponic systems was(12.46 ± 1.63)% of applied radioactivity(AR)(C. dactylon),(52.36 ± 6.38)%(N. nucifera) and(76.55 ± 6.07)%(B. pilosa), respectively. The ~(14)C-residues in the plant extractable fractions and the corresponding media were confirmed by radio-Thin Layer Chromatography(TLC), radio-High Performance Liquid Chromatography(HPLC) and Gas Chromatography-Electron Ionization Mass Spectrometry(GC–EIMS) as propanil,3,4-dichloroaniline(DCA) and N-(3,4-dichlorophenyl)-β-D-glucopyranosylamine(Glu-DCA).(2)About 8% of AR was taken up by both aseptic plants, from which 7.0% of AR was extracted and identified also as propanil, DCA and Glu-DCA.(3) Concerning cell suspension cultures,(39.22 ±9.39)% of AR was absorbed by C. dactylon after 72 hr, whereas the accumulated ~(14)C-propanil by L.minor cell suspension culture amounted to(65.04 ± 1.72)% after 7 days. The identified compounds in cell cultures are consistent with those in the tested plants. Most of the pesticide residues in the intact plants were un-extractable, which are recognized as the end of the detoxification process. We therefore consider these plants as suitable for the phytoremediation of the herbicide propanil in the TGR region.     

Environmental assessment of green hardboard production coupled with a laccase activated system

European consumption of wood-based panels reached record levels in recent years driven mostly by demand from end-use sectors: residential construction, furniture, cabinets, flooring and mouldings. The main panel types are composite boards such as particleboard, high density fiberboard (HDF), medium-density fiberboard (MDF) and other adhesively bonded composites such as plywood and wet-process fiberboard (hardboard). The synthetic resins used in their manufacture come from non-renewable resources, such as oil and gas. Several consequences are associated to this type of adhesives: variation in the availability and cost of these wood adhesives depends on raw materials, the formaldehyde emissions as well as the limited recyclability of the final product. Hence, in the search for alternatives to petroleum-based wood adhesives, efforts are being devoted to develop adhesives by using phenolic substitutes based on lignin, tannin or starch. In this context, the forest industry is increasingly approaching to enzyme technology in the search of solutions. The main goal of this study was to assess the environmental impacts during the life cycle of a new process for the manufacture of hardboards manufacture, considering the use of a two-component bio-adhesive formulated with a wood-based phenolic material and a phenol-oxidizing enzyme. This new product was compared to the one manufactured with the conventional phenol-formaldehyde resin. The study covers the life cycle of green hardboards production from a cradle-to-gate perspective, analysing in detail the hardboard plant and dividing the process chain in three subsystems: Fibers Preparation, Board Forming and Board Finishing.Auxiliary activities such as chemicals, bio-adhesive, wood chips, thermal energy and electricity production and transport were included within the system boundaries.Global warming (GW), photochemical oxidant formation (PO), acidification (AC) and eutrophication (EP) were the impact categories analysed in this study. Additionally, the cumulative energy demand was evaluated as another impact category. According to the results, four stages significantly influenced the environmental burdens of the production system: laccase production, on-site thermal energy and electricity production as well as wood chipping stage. Due to the environmental impact associated to the production of green bonding agents, a sensitivity analysis with special focus on the eutrophying emissions was carried out by evaluating the amount of laccase and lignin based phenolic material used. The combined reduction in both bonding agents may slightly reduce the contributions to this impact category. In addition, a hypothetical scenario with no laccase and with a higher concentration of the lignin based material (25% more) could improve the environmental profile in all impact categories with a reduction of 1.5% in EP.Further research should focus mainly on laccase production, in order to reduce its energy demand as well as on the amount of green adhesive required to obtain mechanical and swelling properties similar to those of conventional hardboard.     

Simulation of Urban-Scale Air Pollution Patterns in Luxembourg: Contributing Sources and Emission Scenarios

The aim of this study is to investigate the air pollution situation in an urban area in southwestern Luxembourg and to simulate annual NO₂ and PM₁₀ concentrations in response to changes in meteorological conditions and emissions using a Gaussian dispersion model. Simulations are carried out for the years 1998–2006. Emission scenarios related to road transport and nonindustrial combustion are performed in order to predict changes of air pollution levels. Road transport is by far the most important local emission source in the study area. Scenarios with more stringent emission standards for vehicles, less traffic, and fewer heavy-duty vehicles lead to reductions of NO_x and primary PM₁₀ emissions. As a result, the annual NO₂ concentrations are decreasing in most parts of the study area and are below the European annual limit value of 40 μg?m^?3. In contrast, a scenario with increased use of wood pellets for domestic heating shows an increase in urban PM₁₀ concentration. The year-to-year variability of meteorological conditions accounts for the same magnitude of absolute NO₂ and PM₁₀ concentration changes as the emission scenarios. The comparison with measurements located in the study area shows that the model is able to predict urban-scale annual average air pollution. The proposed application results show that the model can be appropriate for policy-driven air quality management and planning queries.     

Habitat structure helps guide the emergence of colony-level personality in social spiders

Studying the environmental factors that guide the emergence of collective behaviors is instrumental to understanding the ecology and evolution of animal societies. Although recent work has provided insights into the demographic factors that influence inter-colony variation in collective behavior (i.e., colony-level personality or collective personality), relatively few studies have investigated how the physical environment (e.g., habitat structure) affects colony-level personality. Here, we study the emergence of collective personality in prey capture behavior in the social spider, Stegodyphus dumicola. We measured collective prey capture behavior four times over 36 days in a classic repeated measures design. We used four different artificial habitat (web support) structures in three different treatments: habitat structure was either (1) fixed and undisturbed, (2) disturbed with a complete removal of webbing between each measurement, or (3) disturbed with changes of habitat structure between each measurement. Our results revealed that repeatability in colony-level personality was retained as long as habitat structure was not altered. However, the repeatability of colony-level personality declined precipitously when groups were forced to build their webs on novel habitat structures. Furthermore, habitat structure affected collective capture behavior, that is, latency to attack and the number of attackers differed among colonies on different habitat structures. Collectively, our data demonstrate that habitat structure is instrumental in shaping both the mean and repeatability of the collective behavior of colonies and may influence overall foraging success.     

Variation in sensitivity to cadmium among genetically characterized laboratory strains of the midge Chironomus riparius

Estimating the extent of intraspecific variation in sensitivity to contaminant exposure is important in order to explain variation in the outcome of toxicity tests and to predict the effects of chemical stress on natural populations of plants and animals. However, only few studies provide evident data concerning intraspecific variation in life-history traits caused by a differential response to chemical stress. In this study, we compared the life-history response of six laboratory strains of the midge Chironomus riparius to cadmium exposure in a full life-cycle assay. In addition, the level of genetic variation in all strains was measured at five variable microsatellite loci. Several significant differences in life-history traits among the strains were observed in controls and cadmium treatments. The extent of variation among strains was largest at moderate cadmium concentration (0.42 mg Cd/kg dw). At increased Cd concentrations all strains showed similar levels of high mortality and reduced reproductive success. All strains exhibited considerable levels of genetic impoverishment compared to field populations. Strains with low genetic variation showed reduced fitness in the controls and were more susceptible to Cd exposure. For instance, no reproductive success in the lowest Cd treatment was observed for the strain with the lowest level of genetic diversity. In contrast, this Cd concentration had no negative effects on life-history traits of more variable strains. These results confirm recent findings, that inbreeding and reduced genetic variation influence the reaction of populations towards environmental stress. In addition, we show that the level of genetic variation and inbreeding directly influences the outcome of toxicity tests and contributes to the lack of reproducibility of test results among laboratories.     

放牧阉牦牛提前出栏甲烷排放强度减排潜力探讨

以阉牦牛提前出栏项目活动为例,按照2006年IPCC国家温室气体清单优良做法指南的计量方法,在同等牧草利用量的前提下,分别对4岁和7岁阉牦牛一生CH4排放总量和单位体重CH4排放量(即排放强度)进行了初步比较分析.发现在同等牧草利用量的基础上,由于饲养一头7岁阉牦牛一生所消耗的牧草量相当于可饲养2.1头4岁的阉牦牛所消耗的牧草量,所以从CH4排放总量而言,前者一生排放CH4总量比后者少86.3 kg.然而,由于后者总体重比前者重192 kg,所以,后者的单位体重CH4排放强度(以CH4/体重计)只有0.973 kg·kg-1,而前者为1.374 kg·kg-1.根据排放强度的概念,在同等牧草消耗量的基础上,如果将一头7岁阉牦牛替代成饲养2.1头4岁的阉牦牛,可以多生产192 kg的活体重,在同样生产192 kg活重的基础上,利用替代法估算后者饲养方式比前者饲养方式可以实现77 kg CH4减排量,即相当于总减排1.6 t CO2当量.因此,基于排放强度减排而不是总量减排的概念,提前出栏有较大的CH4减排潜力.     

A relict trematosauroid (Amphibia: Temnospondyli) from the Middle Jurassic of the Junggar Basin (NW China)

A temnospondyl ilium from the uppermost Toutunhe Formation (Middle Jurassic, Callovian) of the southern Junggar Basin is described. Among the known temnospondyls it is very unusual in morphology because of its very long and slender shaft. It compares closely only to the ilium of one of the latest known trematosaurids from the Ladinian of southern Germany. The Toutunhe Formation has also yielded vertebrae and skull fragments of temnospondyls which belong to the brachyopid Gobiops from the Upper Jurassic of Mongolia. Brachyopoid ilia do not, however, display a morphology similar to that of the new specimen. It is therefore concluded that this specimen represents a second taxon of temnospondyl from the Toutunhe Formation, which probably represents the latest surviving trematosauroid. The Trematosauroidea, which was hitherto exclusively known from the Lower to early Upper Triassic, therefore joins the Brachyopoidea – and possibly the Capitosauroidea – as another group of temnospondyls which survived the end-Triassic mass extinction.     

Presentation of ventriculomegaly at 11–14 weeks of gestation: An analysis of longitudinal data

Objectives

The aim of this study was to examine the value of the sonographic measurements of the choroid plexus and the lateral ventricles at 11–14 gestational weeks in fetuses that had the diagnosis of second-trimester ventriculomegaly (VM) as a clinical reference.

Methods

The standard axial plane used for biparietal diameter measurement from 2D stored images in the first trimester was used to calculate the ratio between the choroid plexus and lateral ventricle diameter (PDVDR), the choroid plexus and lateral ventricle length (PLVLR) and the choroid plexus and lateral ventricle area (PAVAR) in 100 normal and 15 fetuses diagnosed with second-trimester VM.

Results

In fetuses with VM, the measurements of PDVDR, PLVLR and PAVAR were all significantly smaller compared to normal fetuses (p = < 0.001, <0.001, <0.01). Four out of seven cases with mild VM had measurements below the 5th percentile (57%). 75% of cases with moderate or severe VM had at least one measurement below the 5th percentile.

Conclusions

Since the axial plane of the fetal head is obtained in all first-trimester routine screenings, the measurements of PDVDR, PLVLR and PAVAR could easily be integrated into routine examinations for an early detection of VM.