Cropland changes in times of conflict,reconstruction, and economic development in Iraqi Kurdistan

The destruction of land and forced migration during the Anfal attacks against the Kurds in Iraq in the late 1980s has been reported to have severe consequences for agricultural development. A reconstruction program to aid people in returning to their lands was launched in 1991. To assess the agricultural situation in the Duhok governorate during the pre-Anfal (A), post-Anfal (B), reconstruction (C), and present (D) periods, we mapped winter crops by focusing on inter-annual variability in vegetation greenness, using satellite images. The results indicate a decrease in cultivated area between period A and B, and a small increase between period B and C. This supports reports of a decline in cultivated area related to the Anfal campaign, and indicates increased activity during the reconstruction program. Period D showed a potential recovery with a cropland area similar to period A.     

Evaluation of trajectories calculated from ecmwf data against constant volume balloon flights during etex

This paper validates trajectories calculated from ECMWF analyses against the tracks of constant volume balloons (CVBs) released during the European tracer experiment (ETEX). The altitudes of the calculated trajectories were adjusted to the altitudes of the respective balloons in short intervals to allow direct comparisons. The agreement between the calculated trajectories and the balloon tracks was very good for the first experiment (individual errors from 1 to 26%, average 15%), and excellent (errors from 2 to 11%, average 6%) for the second one. The agreement for the second experiment was probably partly better because the CVBs travelled above the planetary boundary layer, but the small errors also indicate that the ECMWF fields of the horizontal wind were of exceptionally good quality in the second experiment. This is in sharp contrast to the results of the dispersion models which all failed in the prediction of the perfluorocarbon tracer dispersion for the second experiment. A likely explanation for this is that vertical motions, possibly on small scales, were not correctly captured by the ECMWF analyses, but it is not possible to clarify this with the CVB data.     

Vertical distribution and speciation of trace metals in weathering flotation residues of a zinc/lead sulfide mine

Sulfide-bearing mine tailings are a serious environmental problem around the world. In this study, the vertical distribution and speciation of Zn and Pb in the fine-grained flotation residues of a former sulfide ore mine in Germany were investigated to assess the inorganic weathering processes that effect the environmental risk arising from this site. Total metal contents were determined by X-ray fluorescence spectroscopy (XRF). Mobilizable fractions of Zn, Pb, Fe, and Mn were quantified by sequential chemical extractions (SCE). Furthermore, the speciation of Zn was analyzed by Zn K-edge extended X-ray absorption fine structure spectroscopy (EXAFS) to identify the residual Zn species. The variations in pH and inorganic C content show an acidification of the topsoil to pH 5.5. EXAFS results confirm that Zn is mainly bound in sphalerite in the subsoil and weathering reactions lead to a redistribution of Zn in the topsoil. A loss of 35% Zn and S from the topsoil compared with the parent material with 10 g kg-1 Zn and neutral pH has been observed. If acidification proceeds it will lead to a significant release of Zn, S, and Pb to the ground water. In contrast to Zn, Pb is enriched in the mobile fraction of the topsoil by more than a factor of two compared with the subsoil which contains a total of 2 g kg-1 Pb. Thus, the high bioavailability of Pb and the potential for Pb uptake by plants and animals currently represent the most severe threat for environmental health.     

Determination of herbicides in stemflow and throughfall of beeches (Fagus sylvatica L.) and in rainfall

The pesticide contamination of water samples collected in and nearby a beech forest in northern Germany was evaluated. For this purpose, a method for the collection of water samples from stemflow and throughfall of beeches (Fagus sylvatica L.) and rainfall was developed in response to the demands for the analysis of organic contaminants in water samples. Furthermore a sensitive and selective multiresidue method was developed to determine 18 pesticides, frequently used in Germany, in aqueous samples. The samples collected were taken from the stemflow, the crown throughfall and the rainfall between May and November 2001. Analysis based on reversed-phase liquid chromatography with a pneumatically assisted electrospray mass spectrometer followed a solid phase extraction using C-18 extraction cartridges. Isoproturon, metolachlor, prosulfocarb and terbuthylazine were found during and shortly after their application period. In rainfall metolachlor, terbuthylazine and prosulfocarb were detectable in concentrations between 5 and 65 ng l(-1) and isoproturon in concentrations between 20 and 360 ng l(-1) respectively. In most of the samples, concentrations of those four pesticides were higher and detectable for a longer time in stemflow than in rainfall. Crown throughfall samples were collected from the end of August to November. Absolute deposition of isoproturon to forest soil were up to 70 times higher in comparison to rainwater samples.     

Mineralization,metabolism and formation of non-extractable residues of 14C-labelled organic contaminants during pilot-scale composting of municipal biowaste

Use of municipal biowaste for composting instead of its disposal has become a major source of concern as regards contamination by hazardous substances. To elucidate the hazard potential of compost application, municipal biowaste was amended with 14C-labelled model substances (pyrene, simazine) and incubated in a pilot-scale composting simulation system. A mass balance incorporating the mineralization, metabolism and sorption of the two model substances was established over a period of 370 days. The results are quite different for the two chemicals, reflecting their intrinsic properties: more than 60% of the applied 14C-simazine resulted in non-extractable residues (NER). Silylation experiments indicated that the formation of NER from simazine and its metabolites was due to both physical entrapment in the matrix and chemical binding. The mineralization and formation of NER represented the major pathways of disappearance for pyrene during one year of composting, accounting for 60 and 26% of initially applied 14C-activity, respectively. Mineralization occurred delayed after the thermophilic phase. As regards remobilization, release of pyrene from NER during composting could be excluded, whereas simazine, data were inconclusive in this respect.     

CHEMIFOG_V – A Model to Simulate Radiation Fogs and their Interaction with Vegetation and Chemistry

Radiation fog is an important modifier of atmosphericcompounds in the planetary boundary layer. In vegetated areas effects are especially pronounced due to the enlarged surface area. Besides affectingthe lower boundary of atmospheric models fog acts as amulti-phase reaction chamber leading to acid deposition. Here we present the 1-dimensional radiation fog modelCHEMIFOG_V to simulate regional radiation fogevents. The key feature of the fog model is thedetailed microphysics, where the aerosol/dropletspectrum is describedwith a joint 2-dimensional distribution, but also thedynamics, thermodynamics, and radiative transfer are calculated. Toinvestigate the interaction between fog and the biosphere amulti-layer vegetation module, including a soil module as well as a drydeposition module were coupled. Vegetation influences thedynamics, thermodynamics, and the radiation field of the lowestatmospheric layers. With CHEMIFOG_V, numerical case studieson dry and moist deposition processes on vegetation surfaces wereperformed. Hereby multi-phase chemistry and the processing of aerosolswere considered. The results show that the chemical composition of thedeposited fog droplets is mainly determined by the aerosol composition. Dry deposition fluxes are dependent on the incoming radiation and the leaves' surface conditions with respect to water coverage.Due to chemical aerosol processing and deposition, the aerosol spectrumis significantly modified in the planetary boundary layer.     

Photocrosslinking of an Acrylated Epoxidized Linseed Oil: Kinetics and its Application for Optimized Wood Coatings

Over the past few decades, the industry developed an increasing interest in using renewable, bio-based thermosetting polymers as matrix systems for composites and coating systems. In the present paper an acrylated epoxidized linseed oil (AELO) was synthesized from epoxidized linseed oil (ELO) through ring opening of the oxirane group using acrylic acid as the ring opening agent. The synthesized AELO was mixed with three different photoinitiators and cured under monochromatic conditions (???=?365?nm) at different light intensities and at different temperatures. The concentration of the initiators was aligned that all initiators absorb at 365?nm the same amount of light. The evolution of cure was monitored by using real-time infrared spectroscopy with a heated attenuated total reflection unit. The decrease of absorption in the measured spectra at 1,406?cm^?1 was used to calculate the conversion of acrylic double bonds with increasing time of UV light exposure to get information about the cure kinetics for each AELO mixture at different light intensities and different temperatures. Wood substrates were coated in a preliminary work with the AELO mixtures and after UV-curing some technological coating properties like gloss, scratch resistance, adhesion, and solvent resistance were tested. In combination with the information about the cure kinetics in the present work the coating properties were correlated with the cure evolution and the final degree of double bond conversion. The found correlation can be used in the future to find optimized coating conditions for the AELO mixtures on wood substrates.     

CCall--healthy and successful work in call centres.

Call centre workplaces are in many ways a challenge to occupational health and safety. The occupation itself can be described as an IT information technology-supported, communication-intensive form of work with often unusual working hours and a high rate of part-time employment. Data on the employee turnover as well as absenteeism related to occupational disability is quite contradictory. Occupational safety and its proponents still have to find new ways into the corporate structures and cultures of this relatively new and rapidly growing branch of industry. In a 2-year research and development project, using a holistic approach and under consideration of all the relevant disciplines, call centre workplaces were studied, and organisational measures were developed and field tested by putting them into practice. Practical help was developed for a sustainable strategy for successful and healthy work in call centres.     

Does the Temporal Resolution of Precipitation Input Influence the Simulated Hydrological Components Employing the SWAT Model?

This study aimed to evaluate the influence of sub‐daily precipitation time steps on model performance and hydrological components by applying the Green and Ampt infiltration method using the Soil and Water Assessment Tool (SWAT). Precipitation was measured at a resolution of 0.1 mm and aggregated to 5‐, 15‐, 30‐, and 60‐min time steps. Daily discharge data over a 10‐year period were used to calibrate and validate the model. Following a global sensitivity analysis, relevant parameters were optimized through an automatic calibration procedure using SWAT‐CUP for each time step. Daily performance statistics were almost equal among all four time steps (NSE ≈ 0.47). Discharge mainly consisted of groundwater flow (55%) and tile flow (42%), in reasonable proportions for the investigated catchment. In conclusion, model outputs were almost identical, showing simulations responded nearly independently of the chosen precipitation time step. This held true for (1) the selection of sensitive parameters, (2) performance statistics, (3) the shape of the hydrographs, and (4) flow components. However, a scenario analysis revealed that the precipitation time step becomes important when saturated hydraulic conductivities are low and curve numbers are high. The study suggests that there is no need in using precipitation time steps <1 h for lowland catchments dominated by soils with a low surface runoff potential if daily flow values are being considered. Editor's note : This paper is part of the featured series on SWAT Applications for Emerging Hydrologic and Water Quality Challenges. See the February 2017 issue for the introduction and background to the series.     

Hydrogen storage and distribution systems

Hydrogen storage and transportation or distribution is closely linked together. Hydrogen can be distributed continuously in pipelines or batch wise by ships, trucks, railway or airplanes. All batch transportation requires a storage system but also pipelines can be used as pressure storage system. Hydrogen exhibits the highest heating value per weight of all chemical fuels. Furthermore, hydrogen is regenerative and environment friendly. There are two reasons why hydrogen is not the major fuel of toady’s energy consumption: First of all, hydrogen is just an energy carrier. And, although it is the most abundant element in the universe, it has to be produced, since on earth it only occurs in the form of water. This implies that we have to pay for this energy, which results in a difficult economic task, because since the industrialization we are used to consuming energy for free. The second difficulty with hydrogen as an energy carrier is the low critical temperature of 33 K, i.e. hydrogen is a gas at room temperature. For mobile and in many cases also for stationary applications the volumetric and gravimetric density of hydrogen in a storage system is crucial. Hydrogen can be stored by six different methods and phenomena: high pressure gas cylinders (up to 800 bar), liquid hydrogen in cryogenic tanks (at 21 K), adsorbed hydrogen on materials with a large specific surface area (at T < 100 K), absorbed on interstitial sites in a host metal (at ambient pressure and temperature), chemically bond in covalent and ionic compounds (at ambient pressure), oxidation of reactive metals e.g. Li, Na, Mg, Al, Zn with water. These metals easily react with water to the corresponding hydroxide and liberate the hydrogen from the water. Finally, the metal hydroxides can be thermally reduced to the metals in a solar furnace.