Zinc fractionation in contaminated soils by sequential and single extractions: influence of soil properties and zinc content

We studied the fractionation of zinc (Zn) in 49 contaminated soils as influenced by Zn content and soil properties using a seven-step sequential extraction procedure (F1: NH4NO3; F2: NH4-acetate, pH 6; F3: NH3OHCl, pH 6; F4: NH4-EDTA, pH 4.6; F5: NH4-oxalate, pH 3; F6: NH4-oxalate/ascorbic acid, pH 3; F7: residual). The soils had developed from different geologic materials and covered a wide range in soil pH (4.0-7.3), organic C content (9.3-102 g kg(-1)), and clay content (38-451 g kg(-1)). Input of aqueous Zn with runoff water from electricity towers during 26 to 74 yr resulted in total soil Zn contents of 3.8 to 460 mmol kg(-1). In acidic soils (n = 24; pH <6.0), Zn was mainly found in the mobile fraction (F1) and the last two fractions (F6 and F7). In neutral soils (n = 25; pH > or =6.0), most Zn was extracted in the mobilizable fraction (F2) and the intermediate fractions (F4 and F5). The extractability of Zn increased with increasing Zn contamination of the soils. The sum of mobile (F1) and mobilizable (F2) Zn was independent of soil pH, the ratio of Zn in F1 over F1+F2 plotted against soil pH, exhibited the typical shape of a pH sorption edge and markedly increased from pH 6 to pH 5, reflecting the increasing lability of mobilizable Zn with decreasing soil pH. In conclusion, the extractability of Zn from soils contaminated with aqueous Zn after decades of aging under field conditions systematically varied with soil pH and Zn content. The same trends are expected to apply to aqueous Zn released from decomposing Zn-bearing contaminants, such as sewage sludge or smelter slag. The systematic trends in Zn fractionation with varying soil pH and Zn content indicate the paramount effect of these two factors on molecular scale Zn speciation. Further research is required to characterize the link between the fractionation and speciation of Zn and to determine how Zn loading and soil physicochemical properties affect Zn speciation in soils.     

Hydrolysed wool: a novel chelating agent for metal chelant-assisted phytoextraction from soil

Phytoextraction has revealed great potential, however it is limited by the fact that plants need time and nutrient supply and have a limited metal uptake capacity. Although the use of synthetic chelators, such as EDTA, enhances heavy metal extraction, it also produces the negative side effects of high phytotoxicity, as well as leaching of essential metals. The aim of this research was to investigate the application of wool, in mobilising metals and in improving the phytoextraction of metals-contaminated soil. We performed column experiments with 14 d and 7 d partially hydrolysed wool as chelating agent on a silty-loamy sand agricultural soil. In the column experiment the 14 d wool hydrolysate mobilised 68% of Cu in soil, whereas in the case of Cd it mobilised 5.5%. The model plant selected for the phytoextraction experiments was tobacco (Nicotiana tabacum). The plant uptake of Cd and Cu, assisted by the application of 6.6 g kg(-1) wool hydrolysate was increased by 30% in comparison to the control plants. The application of 13.3 g kg(-1) wool hydrolysate enhanced the Cu uptake by up to 850%. Moreover, high leaching probability frequently observed when applying chelating agents, such as EDTA or ethylene diamine disuccinate (EDDS), were not detected. The use of hydrolysed wool therefore merits further investigation.     

X-ray absorption and photoelectron spectroscopy investigation of selenite reduction by FeII-bearing minerals

The long-lived radionuclide 79Se is one of the elements of concern for the safe storage of high-level nuclear waste, since clay minerals in engineered barriers and natural aquifer sediments strongly adsorb cationic species, but to lesser extent anions like selenate (SeVIO4(2-)) and selenite (SeIVO3(2-)). Previous investigations have demonstrated, however, that SeIV and SeVI are reduced by surface-associated FeII, thereby forming insoluble Se0 and Fe selenides. Here we show that the mixed FeII/III (hydr)oxides green rust and magnetite, and the FeII sulfide mackinawite reduce selenite rapidly (< 1 day) to FeSe, while the slightly slower reduction by the FeII carbonate siderite produces elemental Se. In the case of mackinawite, both S(-II) and FeII surface atoms are oxidized at a ratio of one to four by producing a defective mackinawite surface. Comparison of these spectroscopic results with thermodynamic equilibrium modeling provides evidence that the nature of reduction end product in these FeII systems is controlled by the concentration of HSe(-); Se0 forms only at lower HSe(-) concentrations related to slower HSeO3(-) reduction kinetics. Even under thermodynamically unstable conditions, the initially formed Se solid phases may remain stable for longer periods since their low solubility prevents the dissolution required for a phase transformation into more stable solids. The reduction by Fe2+-montmorillonite is generally much slower and restricted to a pH range, where selenite is adsorbed (pH < 7), stressing the importance of a heterogeneous, surface-enhanced electron transfer reaction. Although the solids precipitated by the redox reaction are nanocrystalline, their solubility remains below 6.3 x 10(-8) M. No evidence for aqueous metal selenide colloids nor for Se sorption to colloidal phases was found. Since FeII phases like the ones investigated here should be ubiquitous in the near field of nuclear waste disposals as well as in the surrounding aquifers, mobility of the fission product 79Se may be much lower than previously assumed.     

Plant uptake of trace elements on a Swiss military shooting range: uptake pathways and land management implications

Over 400tons of Pb enters Swiss soils annually at some 2000 military shooting ranges (MSRs). We measured elements in the leaves of 10 plant species and associated rhizospheric soil on the stop butt of a disused MSR. The geometric mean concentrations of Pb, Sb, Cu, Ni in rhizospheric soils were 10,171mg/kg, 5067mg/kg, 4125mg/kg and 917mg/kg. Some species contained Pb, Cu and Ni, above concentrations (30mg/kg, 25mg/kg and 50mg/kg) shown to be toxic to livestock. Most contaminants in leaves resulted from surface deposition. However, at soil Pb concentrations >60,000mg/kg, Equisetum arvense and Tussilago farfara took up >1000mg/kg Pb into the leaves. These plants are not hyperaccumulators, having <100mg/kg Pb in leaves at lower soil concentrations. Removal of soil with more than 30,000 Pb, from which one could smelt this metal to offset remediation costs, followed by revegetation, would minimise dust and hence leaf-borne contaminants.     

Role of dissolved humic acids in the biodegradation of a single isomer of nonylphenol by Sphingomonas sp

This study shows the important role of humic acids in the degradation of ¹⁴C and ¹³C labeled isomer of NP by Sphingomonas sp. strain TTNP3 and the detoxification of the resulting metabolites. Due to the association of NP with humic acids, its solubility in the medium was enhanced and the extent of mineralization of nonylphenol increased from 20% to above 35%. This was accompanied by the formation of significant amounts of NP residues bound to the humic acids, which also occurred via abiotic reactions of the major NP metabolite hydroquinone with the humic acids. Gel permeation chromatography showed a non-homogenous distribution of NP residues with humic acids molecules, with preference towards molecules with high-molecular-weight. Solid state ¹³C nuclear magnetic resonance spectroscopy indicated that the nonextractable residues resulted exclusively from the metabolites. The chemical shifts of the labeled carbon indicated the possible covalent binding of hydroquinone to the humic acids via ester and possibly ether bonds, and the incorporation of degradation products of hydroquinone into the humic acids. This study provided evidences for the mediatory role of humic acids in the fate of NP as a sink for bacterial degradation intermediates of this compound.     

Strategies and methods for investigation of airborne biological agents from work environments in Germany.

In 2004/2005, a European Twinning Project was carried out to support Polish occupational safety and health institutions in putting into practice Directive 2000/54/EC regarding the protection of workers from risks related to exposure to biological agents at work. Information on and training in sampling and analysing biological agents of people responsible for bioaerosol measurements and the assessment of measuring results from the workplace atmosphere were part of the project. This paper is an extract of the authors' activities within the project and can be used as a tool for comparable activities in future projects with other European Union candidates. It gives information on working standards for bioaerosol measurements worked out and commonly used in Germany within the frame of European guidelines for bioaerosol measurements in the workplace atmosphere. Additionally it summarizes the authors' long practical experience in carrying out bioaerosol measurements in the atmosphere of various workplaces.