Impact of mining activities on soils in a semi-arid environment: Sierra Almagrera district, SE Spain

Field and laboratory-column studies were undertaken in order to investigate soil contamination derived from past mining activity in the Sierra Almagrera (SA) district in southeast Spain. The tailings, soil and sediment samples that were collected showed high concentrations of Ag, As, Ba, Cu, Pb, Sb and Zn when analyzed. The mean concentrations of these elements in the tailings were 29.8, 285.4, 54000, 57.7, 2687.5, 179.0 and 2269.0 ppm, respectively. In the soil samples these decreased to 14.3, 96.9, 24700, 37.5, 1859.1, 168.5 and 815.7 ppm, respectively. Geochemical analyses demonstrated high levels of As, Pb and Zn which were above the intervention values set forth in the Andalusian Regulations for Contaminated Soils for As (>50 ppm), Pb (>500 ppm) and Zn (>2000 ppm). Column experiments and mineralogical studies suggest that the dissolution of sulfates and other secondary phases, accumulated in soils and waste-sites during the dry season, acts to control the mobility of metals. The elution curves obtained from column experiments showed a mobilization of Ba, Cu, Pb and Zn, while a low mobility was seen for Ag, As and Sb.     

Pilot survey of a broad range of priority pollutants in sediment and fish from the Ebro river basin (NE Spain)

Priority organic pollutants were investigated in sediments and fish collected along the Ebro river basin (NE Spain) to evaluate their occurrence, transport and bioavailability. Sediments were collected in 18 sites and two species of fish were captured in nine sites according to the availability in each area. The sampling sites covered industrial, urban and agricultural areas. Four methods were used to detect 20 organochlorine compounds (OCs), 8 polycyclic aromatic hydrocarbons, 3 organotin compounds, 2 alkylphenols and 40 polybrominated diphenyl ethers (PBDEs) from purified extracts. The contamination pattern was site specific and no downstream increase in concentration of pollutants was observed but rather a generalized low level diffuse pollution. Target compounds were detected in sediments at 0.01 to 2331 microg/kg dry weight, and only OCs and PBDEs were accumulated in benthopelagic fish. Toxicological assessment was performed according to predicted environmental levels and revealed sites where adverse effects could occur.     

Photocatalytic degradation of five sulfonylurea herbicides in aqueous semiconductor suspensions under natural sunlight

In the present study, the photocatalytic degradation of five sulfonylurea herbicides (chlorsulfuron, flazasulfuron, nicosulfuron, sulfosulfuron and triasulfuron) has been investigated in aqueous suspensions of zinc oxide (ZnO), tungsten (VI) oxide (WO₃), tin (IV) oxide (SnO₂) and zinc sulfide (ZnS) at pilot plant scale under natural sunlight. Photocatalytic experiments, especially those involving ZnO photocatalysis, showed that the addition of semiconductors in tandem with the oxidant (Na₂S₂O₈) strongly enhances the degradation rate of the herbicides in comparisons carried out with photolytic tests. The degradation of the herbicides follows a first order kinetics according to the Langmuir-Hinshelwood model. In our conditions, the amount of time required for 50% of the initial pesticide concentration to dissipate (t_½) ranged from 8 to 27 min (t_30W = 0.3-1.2 min) for sulfosulfuron and chlorsulfuron, respectively in the ZnO/Na₂S₂O₈ system. None of the studied herbicides was found after 120 min of illumination (except chlorsulfuron, 0.2 μg L⁻¹).     

An integrative response by Mytilus chilensis to the toxic dinoflagellate Alexandrium catenella

Physiological responses of Mytilus chilensis exposed to the toxic dinoflagellate Alexandrium catenella were measured over 21 days in the laboratory and were compared with control mussels not exposed to the dinoflagellate. Mussels were collected from culturing ropes at Yaldad Bay, southern Chile (43o08′S 73o44′W), in August 2004 and acclimated to laboratory conditions for one week prior to the experiment. After 8 days, the paralytic shellfish poisoning (PSP) toxins (i.e. saxitoxin) in the tissues of exposed mussels exceeded safe levels for human consumption. Clearance rates, ingestion of organic matter, and absorption efficiency of exposed mussels were significantly lower than those of controls on day 0, but this was followed by an increase on day 3. The exposed mussels also increased their excretion rate over time, and this increase was significantly correlated with the accumulation of PSP toxins in their tissues. Oxygen consumption was not affected by the PSP toxins. The scope for growth (SFG) on day 0 was negative in exposed mussels, but it increased during the experiment. Although feeding activity and absorption efficiency were adversely affected during the first few days of exposure to PSP toxins from A. catenella in the laboratory, the M. chilensis cultured in Yaldad Bay may have evolved mechanisms that allow them to exploit the toxic dinoflagellate as a food source.     

Feeding and movement patterns of the sea cucumber Holothuria sanctori

Sea cucumbers are conspicuous organisms inhabiting almost all marine habitats across the globe. Despite their importance as effective consumers of detritus, little is known about their behavior. We studied organic matter (OM) consumption and nocturnal movement patterns of Holothuria sanctori through indoors assays and in situ experiments at shallow bottoms off Gran Canaria Island (Canary Islands, Spain). H. sanctori has a selective feeding toward high OM concentration sediments. Consumption of OM increased with OM availability, particularly during formation of the gonads. OM consumption did not differ in situ between two adjacent habitats arranged in mosaics: macroalgal beds and urchin-grazed “barrens.” Larger distances and fastest displacements were covered by H. sanctori during the end than the middle and start of the nighttime. Overall, we did not detect a clear “homing” behavior by H. sanctori, yet some individuals showed a fidelity for refuges when shelter availability was lacking.     

Methodology for quantification of waste generated in Spanish railway construction works

In the last years, the European Union (EU) has been focused on the reduction of construction and demolition (C&D) waste. Specifically, in 2006, Spain generated roughly 47million tons of C&D waste, of which only 13.6% was recycled. This situation has lead to the drawing up of many regulations on C&D waste during the past years forcing EU countries to include new measures for waste prevention and recycling. Among these measures, the mandatory obligation to quantify the C&D waste expected to be originated during a construction project is mandated. However, limited data is available on civil engineering projects. Therefore, the aim of this research study is to improve C&D waste management in railway projects, by developing a model for C&D waste quantification. For this purpose, we develop two equations which estimate in advance the amount, both in weight and volume, of the C&D waste likely to be generated in railway construction projects, including the category of C&D waste generated for the entire project.     

Analytical model of metalworking fluid penetration into the flank contact zone in orthogonal cutting

Metalworking fluids (MWFs) are used widely in machining process to dissipate heat, lubricate moving surfaces, and clear chips. They have also been linked to a number of environmental and worker health problems. To reduce these impacts, minimum quantity lubrication (MQL) sprays of MWF delivered in air or CO₂ have been proposed. MQL sprays can achieve performance comparable with conventional water-based or straight oil MWFs while only delivering a small fraction of the fluid. This performance advantage could be explained by the enhanced penetration into the cutting zone that results from delivering MWF in high pressure and precise sprays. To explore this hypothesis, an analytical model of MWF penetration into the flank face of the cutting zone is developed and validated using experimental data. The model is based on a derivation of the Navier–Stokes equation and the Reynolds equation for lubrication and applied to an orthogonal cutting geometry under steady-state conditions. A solution to the model is obtained using a numerical strategy of discretizing the analytical scheme with two-dimensional centered finite difference method. Penetration into the cutting zone is estimated for MQL sprays delivered in air, CO₂ and N₂ as well as two conventional MWFs, straight oil and semi-synthetic emulsion. The model suggests that conventional MWFs, do not penetrate the cutting zone fully and fail to provide direct cooling to the flank zone where wear is most likely to occur. MQL sprays do penetrate the cutting zone completely. Using convective heat transfer coefficients from a previous study, a finite element heat balance is carried out on the tool to understand how each fluid impacts temperature near the flank tip of the tool. The results of the modeling effort are consistent with experimental measurements of tool temperature during turning of titanium (6AL4V) using a K313 carbide tool. The prediction of temperature near the flank indicates that MQL sprays do suppress temperatures near the flank effectively. These results help explain the low levels of tool wear observed for some MQL sprays, particularly those based on high pressure CO₂. This modeling framework provides valuable insight into how lubricant delivery characteristics such as speed, viscosity, and cutting zone geometry can impact lubricant penetration.