A dynamic model for intertemporal allocation of old-growth forests in the Pacific Northwest

Across the globe, continued policy debates regarding the management of old-growth forests center around the difficult task of balancing economic and ecological considerations. Though the forests of the Pacific Northwest United States are among the most studied old-growth ecosystems, ecological and economic analyses have yielded public land management directives that remain controversial. Specifically, the recently adopted Northwest Forest Plan lacks explicit goals for maintaining intergenerational equity for the use of forest resources and the diversity of old-growth ecosystems. Unlike previous studies which rely on monetary quantification of costs and benefits, this study develops and applies a conceptual framework for evaluating socially optimal Pacific Northwest old-growth forest utilization strategies. Conditions for the optimal management of old-growth forests are derived using dynamic programming. The objective function synthesizes relevant biological and economic attributes of the old-growth allocation problem. Results in the form of extraction paths are compared given social pressure for consumptive and non-consumptive benefits, as well as different planning horizons, rates of social time preference, and environmental variance. Lengthening the planning horizon results in a vast divergence of optimal policies in the absence of discounting. Extraction rates appear to approach zero as the planning horizon approaches infinity. While higher rates of social time preference increase the rate of extraction, forest stocks remaining at the terminal time period equal levels remaining with a lower discount rate. Increasing environmental variance results in a higher level of stock remaining at the terminal time period. This analysis, while specific to the old-growth controversy of the Pacific Northwest, does provide general guidelines for addressing similar problems of multiple uses of natural areas, particularly where such uses are mutually incompatible, or where one use may be irreversibly destructive to another.     

An assessment of Mississippi's nonindustrial private forest landowners knowledge of forestry BMP's

This study examined the knowledge levels of Mississippi Non Industrial Private Forest (NIPF) landowners. Data were collected by passing out surveys to participants in Best Management Practices (BMP) educational programs held in conjunction with County Forestry Association (CFA) meetings across Mississippi. Ten CFA's participated in this study. Educational program participants were asked to fill out a survey with several demographic and BMP questions prior to the educational program. Results show that BMP program participants owned an average of 113 hectares, whereas the average Mississippi NIPF landowner owns 20 hectares. Responses to BMP related questions show that Mississippi NIPF landowners have a low level of knowledge concerning BMP's. This situation is likely similar to other states in the Southeastern United States. It can be assumed that county forestry association members are more active and informed about managing their forest land. Therefore, these results may overestimate the BMP knowledge level all landowners in Mississippi.Improved educational programs for NIPF landowners, along with better communication between foresters, loggers, and NIPF landowners are needed if BMP's are to be implemented effectively in Mississippi and across the southern region.     

Healthcare waste management: current practices in selected healthcare facilities, Botswana

Healthcare waste management continues to present an array of challenges for developing countries, and Botswana is no exception. The possible impact of healthcare waste on public health and the environment has received a lot of attention such that Waste Management dedicated a special issue to the management of healthcare waste (Healthcare Wastes Management, 2005. Waste Management 25(6) 567-665). As the demand for more healthcare facilities increases, there is also an increase on waste generation from these facilities. This situation requires an organised system of healthcare waste management to curb public health risks as well as occupational hazards among healthcare workers as a result of poor waste management. This paper reviews current waste management practices at the healthcare facility level and proposes possible options for improvement in Botswana.     

The influence of degree of substitution on blend miscibility and biodegradation of cellulose acetate blends

In this account, we report our findings on blends of cellulose acetate having a degree of substitution (DS) of 2.49 (CA2.5) with a cellulose acetate having a DS of 2.06 (CA2.0). This blend system was examined over the composition range of 0–100% CA2.0 employing both solvent casting of films (no plasticizer) and thermal processing (melt-compressed films and injection molding) using poly(ethylene glycol) as a common plasticizer. All thermally processed blends were optically clear and showed no loss in optical quality after storage for several months. Thermal analysis and measurement of physical properties indicate that blends in the middle composition range are partially miscible, while those at the ends of the composition range are miscible. We suggest that the miscibility of these cellulose acetate blends is influenced primarily by the monomer composition of the copolymers. Bench-scale simulated municipal composting confirmed the biodestructability of these blends and indicated that incorporation of a plasticizer accelerated the composting rates of the blends.In vitro aerobic biodegradation testing involving radiochemical labeling conclusively demonstrated that both the lower DS CA2.0 and the plasticizer significantly enhanced the biodegradation of the more highly substituted CA2.5.While this work was in progress, Robert Gardner was struck with cancer and died on June 6, 1995. This paper is dedicated to his memory and to his contributions as a friend and colleague.     

Considerations for Manufacturing Bio-Based Plastic Products

One engine that drives the United States’ economic growth is an ever-increasing demand for manufactured products, both at home and abroad. This increase has created a major concern for the environment in terms of disposing used goods and ensuring that these products are safe. As environmental concerns grow, however, renewable resources are gaining increasing attention, especially as industrial ecology and product biodegradability gain importance. Added to this, biological materials are increasingly being utilized to replace traditional materials in manufacturing. To aid both educators as well as researchers, this paper examines several considerations that are essential for manufacturing plastic products that contain biomaterials. These include the selection of materials, the selection of manufacturing processes, manufacturing costs, and the quality of final products. Additionally, several standard methods that are commonly used for the determination of mechanical and physical properties are compiled; thus this paper should be a useful resource for both educators and researchers. The trends discussed here and their implications are critical for those involved in manufacturing, because contrary to conventional wisdom, simultaneously meeting the material production needs of our society, as well as that of the environment are not mutually-exclusive.     

Best Available Treatment Technologies Applied to Groundwater Circulation Wells

Groundwater circulation wells (GCWs) are a quasi‐in‐situ method for remediating groundwater in areas where remediation techniques that limit the water available for municipal, domestic, industrial, or agricultural purposes are inappropriate. The inherently resource‐conservative nature of groundwater circulation wells is also philosophically appealing in today's culture, which is supportive of green technologies. Groundwater circulation wells involve the circulation of groundwater through a dual‐screen well, with treatment occurring between the screens. The wells are specifically designed so that one well screen draws in groundwater and the second returns the groundwater after it has been treated within the well. Historically, the treatment has been performed with specialized equipment proprietary to GCW vendors. Two full‐scale pilot systems at a formerly used Defense Superfund site in Nebraska used best available technologies for treatment components. A multiple‐tray, low‐profile air stripper typically used for pump‐and‐treat remediation systems was successfully adapted for the GCW pilot system located in a trichloroethylene (TCE) hot spot. An ultraviolet water disinfection system was successfully adapted for the GCW pilot system located in a hot spot contaminated with the explosive compound hexhydro‐1,3,5‐trinitro‐1,3,5‐triazine (RDX). The pilot systems showed that GCW technology is competitive with a previously considered pump‐and‐treat alternative for focused extraction, and the regulatory community was supportive of additional GCW applications. A remedial design for the site includes 12 more GCW systems to complete focused remediation requirements. © 2002 Wiley Periodicals, Inc.     

Length polymorphism at the avpr1a locus is correlated with male reproductive behavior in a natural population of prairie voles (Microtus ochrogaster)

Laboratory studies have shown that vasopressin can influence sociosexual behavior through its action on the vasopressin 1a receptor (V1aR). There is substantial evidence that the length of a microsatellite in the gene (avpr1a) encoding for the V1aR can affect social attachment to females and paternal behavior in male prairie voles under laboratory conditions. However, previous field studies of prairie voles have failed to detect a strong effect of the length of a male’s avpr1a allele on their sociosexual behavior, but these studies are typically much shorter than the average prairie vole breeding lifespan. We examined the relationship between male avpr1a microsatellite allele length and sociosexual behavior in a natural population of prairie voles for 15 weeks, closer to the lifespan of prairie voles in nature. Contrary to predictions, we found that males with the longest avpr1a microsatellite alleles were significantly more likely to sire offspring with more than one female and to sire offspring that survived until trappable age than males with the shortest avpr1a microsatellite allele lengths. This relationship was the strongest for males with the longest tenure on the study site. As in previous field studies, we did not find evidence of a relationship between a male’s avpr1a genotype and any index of social behavior including male residency status or the number of females with which males associate. This is the first study to support the hypothesis that a male’s avpr1a genotype is a factor underlying variation in the genetic mating system of prairie voles under natural conditions.     

A constrained least-squares approach to combine bottom-up and top-down CO2 flux estimates

Terrestrial CO₂ flux estimates are obtained from two fundamentally different methods generally termed bottom-up and top-down approaches. Inventory methods are one type of bottom-up approach which uses various sources of information such as crop production surveys and forest monitoring data to estimate the annual CO₂ flux at locations covering a study region. Top-down approaches are various types of atmospheric inversion methods which use CO₂ concentration measurements from monitoring towers and atmospheric transport models to estimate CO₂ flux over a study region. Both methods can also quantify the uncertainty associated with their estimates. Historically, these two approaches have produced estimates that differ considerably. The goal of this work is to construct a statistical model which sensibly combines estimates from the two approaches to produce a new estimate of CO₂ flux for our study region. The two approaches have complementary strengths and weaknesses, and our results show that certain aspects of the uncertainty associated with each of the approaches are greatly reduced by combining the methods. Our model is purposefully simple and designed to take the two approaches’ estimates and measures of uncertainty at ‘face value’. Specifically, we use a constrained least-squares approach to appropriately weigh the estimates by the inverse of their variance, and the constraint imposes agreement between the two sources. Our application involves nearly 18,000 flux estimates for the upper midwest United States. The constrained dependencies result in a non-sparse covariance matrix, but computation requires only minutes due to the structure of the model.     

Spectral reflectance and communication in the wolf spider, <Emphasis Type="Italic">Schizocosa ocreata</Emphasis> (Hentz): simultaneous crypsis and background contrast in visual signals

Animal color patterns often reflect a compromise between natural selection for crypsis or inconspicuousness to predators and sexual selection for conspicuousness to potential mates. In leaf litter-dwelling wolf spider species like Schizocosa ocreata, body coloration often closely matches the background coloration of a generally brown environment. However, body parts used in communication should exhibit high contrast against background coloration. We used spectral analysis to examine male and female S. ocreata for matching and contrasting coloration against leaf litter. Values were plotted in multivariate color space, based on reflectivity in different frequency ranges. When viewed from above, colors of both males and females overlap with values for dead brown leaf litter and soil, suggesting cryptic coloration when viewed by potential predators. However, when viewed from a lateral perspective, both males and females show color values that are polar opposites of litter backgrounds, suggesting higher contrast when viewed by other spiders. Moreover, male secondary characters used in visual signaling by S. ocreata (tibia brushes) show the highest level of background contrast. These findings suggest that S. ocreata wolf spiders have color patterns that provide both crypsis and background contrast at the same time, depending on receiver viewing perspective.     

A simple semi-empirical model for predicting missing carbon monoxide concentrations

Carbon monoxide monitoring using continuous samplers is carried out in most major urban centres in the world and generally forms the basis for air quality assessments. Such assessments become less reliable as the proportion of data missing due to equipment failure and periods of calibration increases. This paper presents a semi-empirical model for the prediction of atmospheric carbon monoxide concentrations near roads for the purpose of interpolating missing data without the need for any traffic or emissions information. The model produces reliable predictions while remaining computationally simple by being site-specifically optimized. The model was developed for, and evaluated at, both a suburban site and an inner city site in Hamilton, New Zealand. Model performance statistics were found to be significantly better than other simple methods of interpolation with little additional computational complexity.