Effects of post-sampling conditions on ambient carbon aerosol filter measurements

Ambient carbonaceous material collected on quartz filters is prone to measurement artifacts due to material gained or lost during post-sampling field latency, shipping, and storage. In seventeen sampling events over a one year period, ambient PM_2.5 aerosols were collected on quartz filters (without denuders) and subjected to various filter treatments to assess the potential for and extent of artifacts. The filter treatments simulated post-sampling environments that filters may be exposed to and included: storage at 40 °C for up to 96 h, storage at ?16 °C for 48 h, and storage at room temperature (～21 °C) for 48 h. Carbon mass on the filters was measured using a thermal-optical method. The total carbon (TC), total organic carbon (TOC) and total elemental carbon (TEC) as well as carbon thermal fraction masses were obtained. Statistical analyses were performed to identify significant differences in carbon fraction concentrations between filters analyzed immediately after sampling and after being subjected to treatment.TOC and TC concentrations decreased by on average 15 ± 5% and 10 ± 4%, respectively, for filters maintained at 40 °C for 96 h but did not change for filters stored at room temperature or frozen for 48 h. TEC did not change for any of the filter treatments. The mass concentration for the organic carbon thermal fraction that evolves at the lowest temperature step (OC1) decreased with increasing storage time at 40 °C with average losses of 70 ± 7% after 96 h. Therefore, OC1 is not a stable measurement due to post-sampling conditions that may be encountered. This work demonstrates that TOC and TC can have substantial measurement artifacts on filters subjected to field latency and other non-temperature controlled post-sampling handling, compared to the carbon loadings on the filter at the end of the sampling period.     

Trends and sources of particulate matter in the Superstition Wilderness using air trajectory and aerosol cluster analysis

Ambient aerosols adversely affect human health and visibility and impact climate. Identification of sources of particulate matter and its precursors is necessary for developing control strategies. The goal of this research is to utilize long-term speciated particulate matter data and back-trajectory cluster analyses to determine trends and sources of particulate matter in the Superstition Wilderness, a rural area east of Phoenix, Arizona. Twenty-four hour back-trajectories were calculated for every hour of every 24-h particulate matter sample obtained by IMPROVE from 1991 to 2004. Days that included back-trajectories with considerable spatial variance were excluded from further analyses. To minimize uncertainties inherent in single trajectories, all calculated trajectories for each sampling day were averaged to represent the air mass sampled during that day. Cluster analysis of trajectories identified four unique regions, including a region with Phoenix, a region with copper smelters, and one with coal-fired power plants. Yearly averages of sulfate, nitrate, soil, and carbon concentrations were calculated for each region. Statistically significant trends in species concentrations by region and independent of region and differences in concentrations between regions were examined.Sulfate concentrations from the region with smelters were higher than other regions but decreased during the study period. Emissions data from the smelters indicate that much of the sulfate from the region was due to the smelters. The overall 2.2% year⁻¹ decrease in sulfate concentrations at TNM is likely due to decreased emissions from the copper smelters. A 3.6% year⁻¹ increase in nitrate concentrations was driven largely by increasing NO_x concentrations from Phoenix and to a lesser extent the region southwest of the site which includes Tucson and suburban/urban areas between Phoenix and Tucson. Soil concentrations were higher from regions with deserts than the region without desert. This method could not identify trends or source regions of carbonaceous aerosols at this site.     

Predator cues and an herbicide affect activity and emigration in an agrobiont wolf spider

Animals use chemical cues for signaling between species. However, anthropogenic chemicals might interrupt this natural chemical information flow, with potential impacts on predator-prey interactions. Our goal was to explore how Buccaneer® Plus, a common herbicide similar to Round-up® (active ingredient glyphosate), affected the interactions between intraguild predators. The wolf spider Pardosa milvina (Hentz, 1844) is numerically dominant in agricultural systems across the eastern United States, and often falls prey to or competes with the larger wolf spider, Hogna helluo (Walckenaer, 1837) and/or the carabid beetle, Scarites quadriceps (Chaudoir, 1843). We tested the effects of chemical cues from these intraguild predators and exposure to herbicide on the activity, emigration, and survival of P. milvina using a full-factorial laboratory experiment. Both predator cues and herbicide led to a decrease in movement by P. milvina. However, although H. helluo cues alone decreased movement, S. quadriceps cues only decreased movement when combined with herbicide. These results indicate that predation risk and herbicide application likely interact in complex ways to affect the movement of a major arthropod predator in agricultural systems, and thus may have complex effects on the food web.     

Dystrophin protein and rflp analyis for fetal diagnosis and carrier confirmation of duchenne muscular dystrophy

A pregnant woman with indeterminate Duchenne muscular dystrophy (DMD) carrier status, but with DMD diagnosed in her deceased brother (unavailable for study), presented for prenatal diagnosis, intending to continue the pregnancy only if proven unaffected with DMD with near absolute certainty. Creatine kinase (CK) assays to clarify carrier status were inconclusive. Male sex in the fetus was identified, but DNA restriction fragment length polymorphism (RFLP) analysis was not yet available to this centre to investigate the possible transmission of the DMD gene, and the pregnancy was terminated. Tissue histology and dystrophin protein analysis demonstrated the absence of DMD. In a situation with proven maternal carrier status, future fetal inheritance of the opposite maternal X chromosome would indicate the presence of DMD. However, maternal carrier status remained in doubt through a second pregnancy, even with RFLP studies, and was finally established when dystrophin analysis confirmed the presence of DMD in the second fetus. Histologic findings are presented, contrasting features in the two fetuses. The value of dystrophin analysis for establishing the diagnosis of fetal DMD, in this case proving maternal carrier status in a difficult situation, and for demonstrating DMD gene:RFLP haplotype relationships is illustrated.     

Radon Risk Communication Research: Practical Lessons

Those responsible for state and local radon programs often express frustration about the small share of homes that have been tested for radon, and the small share of those with high readings that have been mitigated. There are now a number of completed studies that have examined how well alternative ways of communicating about radon risk have accomplished the goals of motivating appropriate testing and mitigation. This paper summarizes the research results that are most crucial for planning and implementing effective radon risk communication programs. We identify six reasons why people do not respond to radon as a serious threat and provide some remedies suggested by radon studies.     

Recruitment of Hexagenia mayfly nymphs in western Lake Erie linked to environmental variability.

After a 40-year absence caused by pollution and eutrophication, burrowing mayflies (Hexagenia spp.) recolonized western Lake Erie in the mid 1990s as water quality improved. Mayflies are an important food resource for the economically valuable yellow perch fishery and are considered to be major indicator species of the ecological condition of the lake. Since their reappearance, however, mayfly populations have suffered occasional unexplained recruitment failures. In 2002, a failure of fall recruitment followed an unusually warm summer in which western Lake Erie became temporarily stratified, resulting in low dissolved oxygen levels near the lake floor. In the present study, we examined a possible link between Hexagenia recruitment and periods of intermittent stratification for the years 1997 2002. A simple model was developed using surface temperature, wind speed, and water column data from 2003 to predict stratification. The model was then used to detect episodes of stratification in past years for which water column data are unavailable. Low or undetectable mayfly recruitment occurred in 1997 and 2002, years in which there was frequent or extended stratification between June and September. Highest mayfly reproduction in 2000 corresponded to the fewest stratified periods. These results suggest that even relatively brief periods of stratification can result in loss of larval mayfly recruitment, probably through the effects of hypoxia. A trend toward increasing frequency of hot summers in the Great Lakes region could result in recurrent loss of mayfly larvae in western Lake Erie and other shallow areas in the Great Lakes.     

Barnacle larvae actively select flow environments supporting post-settlement growth and survival

Many marine dispersive propagules select specific settlement sites based on a range of environmental cues. However, the link between larval choice and post-settlement growth and survival is still poorly understood. Here we show that cypris larvae of the barnacle Balanus improvisus actively reject surfaces exposed to local flow speeds exceeding 5-10 cm/s. Field experiments show that post-settlement growth and survival decline in freestream flows above 15 cm/s. Moreover, studies in flume flow at local speeds exceeding 10 cm/s reveal that early juveniles show reduced feeding rates caused by deformation of the cirral fan, reduced retention efficiency, and a decrease in time spent feeding. We conclude that cypris larvae actively reject flow environments that will be suboptimal for suspension feeding in the early post-settlement phase. Our study suggests that larval choice can be adaptively connected to a specific part of the life cycle, in this case the very sensitive time after metamorphosis.     

Serial batch leaching procedure for characterization of coal fly ash

Although many leaching methods have been used for various purposes by research groups, industries, and regulators, there is still a need for a simple but comprehensive approach to leaching coal utilization by-products and other granular materials in order to estimate potential release of heavy metals when these materials are exposed to natural fluids. A serial batch characterization method has been developed at the National Energy Technology Laboratory that can be completed in 2–3 days to serve as a screening tool. The procedure provides an estimate of cumulative metals release under varying pH conditions, and leaching the sample at increasing liquid/solid ratios can indicate the rate at which this process will occur. This method was applied to eight fly ashes, adapted to the acidic or alkaline nature of the ash. The leachates were analyzed for 30 elements. The test was run in quadruplicate, and the relative standard deviation (RSD) was used as a measure of method reproducibility. RSD values are between 0.02 and 0.70, with the majority of the RSD values less than 0.3. The serial batch leaching procedure was developed as a simple, relatively quick, yet comprehensive method of estimating the risk of heavy metal release from fly ash when it is exposed to natural fluids, such as acid rain or groundwater. Tests on a random selection of coal fly ashes have shown it to be a reasonably precise method for estimating the availability and long-term release of cations from fly ash.     

Formaldehyde Concentrations in Wisconsin Mobile Homes

Mobile homes utilize a class of prefabricate construction techniques which rely greatly upon the use of particle board and hardwood plywood paneling for structural components. This has resulted In household sources which may emit formaldehyde into the home, since urea-formaldehyde resins are used as the bonding agent in most pressed wood stocks. A series of 137 mobile home households was investigated to determine indoor formaldehyde exposure concentrations. Homes were selected based on the estimated age of the construction components. Homes were studied serially for a nine-month period, with formaldehyde samples obtained on a monthly basis using a modified NIOSH chromotropic acid procedure. Formaldehyde concentrations were found to range from less than 0.10 ppm to 2.84 ppm. The median exposure concentration was 0.39 ppm. Analysis of variance was performed on each home to discern visit and room measurement effects. Eighty-nine percent of the homes exhibited no measurement placement effects, while only 10 percent failed to demonstrate between-visit variance effects. Regression models were constructed to predict household formaldehyde concentrations. Concentrations exhibited an inverse relationship with the age of the construction materials. A weighted least squares regression model of log of home age predicting temperature-corrected log formaldehyde explained 82 percent of the formaldehyde variation.