Combined chemical and biological treatment of oil contaminated soil

Combined chemical (Fenton-like and ozonation) and biological treatment for the remediation of shale oil and transformer oil contaminated soil has been under study. Chemical treatment of shale oil and transformer oil adsorbed in peat resulted in lower contaminants' removal and required higher addition of chemicals than chemical treatment of contaminants in sand matrix. The acidic pH (3.0) conditions favoured Fenton-like oxidation of oil in soil. Nevertheless, it was concluded that remediation of contaminated soil using in situ Fenton-like treatment will be more feasible at natural soil pH. Both investigated chemical processes (Fenton-like and ozonation) allowed improving the subsequent biodegradability of oil. Moderate doses of chemical oxidants (hydrogen peroxide, ozone) should be applied in combination of chemical treatment (both, Fenton-like or ozonation) and biotreatment. For remediation of transformer oil and shale oil contaminated soil Fenton-like pre-treatment followed by biodegradation was found to be the most efficient.     

Urban atmospheric pollution: personal exposure versus fixed monitoring station measurements

We initiated the PETER (pedestrian environmental traffic pollutant exposure research) project to investigate pedestrians' exposure to traffic related atmospheric pollutants, based on data obtained with the collaboration of selected categories of pedestrian urban workers. We investigated relations between roadside personal exposure levels of volatile aromatic hydrocarbons (including benzene) and particulate matter <10 microm (PM10) among traffic police (n = 126) and parking wardens (n = 50) working in downtown Bologna, Italy. Data were collected from workshifts throughout four 1-week periods in different seasons of 2000-2001. For benzene and PM10, comparisons were made with measurements by fixed monitoring stations, and influence of localized traffic intensity and meteorological parameters was examined. Roadside personal exposure to benzene correlated more strongly with other volatile aromatic hydrocarbons (toluene, xylenes and ethylbenzene) than with PM10. Benzene and PM10 personal exposure levels were higher than fixed monitoring station values (both p<0.0001). At multivariate analysis, benzene and PM10 data from fixed monitoring stations both correlated with meteorological variables, and were also influenced by localized traffic intensity. Plausibly because of the downtown canyon-like streets, weather conditions (during a period of drought) only marginally affected benzene personal exposure, and moderately affected PM10 personal exposure. These findings reinforce the concept that urban atmospheric pollution data from fixed air monitoring stations cannot automatically be taken as indications of roadside exposures.     

Assessing recycling versus incineration of key materials in municipal waste: The importance of efficient energy recovery and transport distances

Recycling of materials from municipal solid waste is commonly considered to be superior to any other waste treatment alternative. For the material fractions with a significant energy content this might not be the case if the treatment alternative is a waste-to-energy plant with high energy recovery rates. The environmental impacts from recycling and from incineration of six material fractions in household waste have been compared through life cycle assessment assuming high-performance technologies for material recycling as well as for waste incineration. The results showed that there are environmental benefits when recycling paper, glass, steel and aluminium instead of incinerating it. For cardboard and plastic the results were more unclear, depending on the level of energy recovery at the incineration plant, the system boundaries chosen and which impact category was in focus. Further, the environmental impact potentials from collection, pre-treatment and transport was compared to the environmental benefit from recycling and this showed that with the right means of transport, recyclables can in most cases be transported long distances. However, the results also showed that recycling of some of the material fractions can only contribute marginally in improving the overall waste management system taking into consideration their limited content in average Danish household waste.     

Household food waste separation behavior and the importance of convenience

Two different strategies aiming at increasing household source-separation of food waste were assessed through a case-study in a Swedish residential area (a) use of written information, distributed as leaflets amongst households and (b) installation of equipment for source-segregation of waste with the aim of increasing convenience food waste sorting in kitchens. Weightings of separately collected food waste before and after distribution of written information suggest that this resulted in neither a significant increased amount of separately collected food waste, nor an increased source-separation ratio. After installation of sorting equipment in households, both the amount of separately collected food waste as well as the source-separation ratio increased vastly. Long-term monitoring shows that results where longstanding. Results emphasize the importance of convenience and existence of infrastructure necessary for source-segregation of waste as important factors for household waste recycling, but also highlight the need of addressing these aspects where waste is generated, i.e. already inside the household.     

Powdered activated carbon coupled with enhanced coagulation for natural organic matter removal and disinfection by-product control: application in a Western Australian water treatment plant

The removal of organic precursors of disinfection by-products (DBPs), i.e. natural organic matter (NOM), prior to disinfection and distribution is considered as the most effective approach to minimise the formation of DBPs. This study investigated the impact of the addition of powdered activated carbon (PAC) to an enhanced coagulation treatment process at an existing water treatment plant on the efficiency of NOM removal, the disinfection behaviour of the treated water, and the water quality in the distribution system. This is the first comprehensive assessment of the efficacy of plant-scale application of PAC combined with enhanced coagulation on an Australian source water. As a result of the PAC addition, the removal of NOM improved by 70%, which led to a significant reduction (80-95%) in the formation of DBPs. The water quality in the distribution system also improved, indicated by lower concentrations of DBPs in the distribution system and better maintenance of disinfectant residual at the extremities of the distribution system. The efficacy of the PAC treatment for NOM removal was shown to be a function of the characteristics of the NOM and the quality of the source water, as well as the PAC dose. PAC treatment did not have the capacity to remove bromide ion, resulting in the formation of more brominated DBPs. Since brominated DBPs have been found to be more toxic than their chlorinated analogues, their preferential formation upon PAC addition must be considered, especially in source waters containing high concentrations of bromide.     

PCDD/PCDF, dl-PCB and PBDE serum levels of Slovak general population

Blood serum specimens from 81 non-occupationally exposed adults residing in four areas close to municipal and waste incinerators as well as metallurgical industry plant and 44 adult subjects coming from control area of Slovakia were analysed for polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), dioxin-like polychlorinated biphenyls (dl-PCBs) and polybrominated diphenylethers (PBDEs). The concentration of total WHO(98)TEQ PCDD/F/dl-PCBs in whole group of donors from areas where known sources causing dioxin contamination are present was significantly higher than in control group of donors (p<0.001). Correlation between the age of donors and PCDD/F and dl-PCB levels was confirmed (Spearman's r(PCDD/Fs)=0.543, r(dl-PCBs)=0.521, p<0.001). Furthermore, this study presents first results concerning the PBDE congeners in human serum of Slovak general population. The total concentration (congeners 28, 47, 99, 100, 153, 154, 183) in control group was approximately 1.5-times higher in comparison to that of residents coming from areas with supposed environmental pollution. The most abundant congeners in all samples were BDE-47 and BDE-153 with median values of 0.24 ng g(-1) lipid and 0.23ngg(-1) lipid, respectively. The positive association between PBDE values and age of donors was not found.     

Formaldehyde personal exposure measurements and time weighted exposure estimates in children

Residential concentrations of formaldehyde have been associated with poor respiratory health in children, where formaldehyde has been measured using stationary monitors inside homes. Although children spend most of their time indoors at home, there are few studies of children’s personal exposure to formaldehyde. The aim of this study was to investigate the relationship between personal exposure formaldehyde concentrations, microenvironmental concentrations and time weighted exposure estimates in children.Forty-one primary school children (aged between 9 and 12 years) wore a personal passive sampler over two 24 h periods in two seasons and completed 24 h daily activity diaries and a questionnaire about lifestyle and behaviour. Samplers were co located indoors at home, outdoors at centralised locations and indoors at school for the corresponding period.Personal exposure formaldehyde concentrations in this group of children were generally low with a geometric mean concentration of 9.1 ppb (range <detection limit to 27.3 ppb). There were strong correlations between personal exposure concentrations and both domestic indoor (r_s = .779, p < 0.001) and time weighted estimated (r_s = .802, p < 0.001) concentrations. The time weighted model did not improve the estimate of personal exposure compared with stationary indoor concentrations. Indoor air concentration measured with a single stationary monitor was a suitable surrogate for personal exposure.     

Very high correlations between fresh weight and lipid-adjusted PCB-153 serum concentrations: irrespective of fasting status, age, body mass index, gender, or exposure distributions

Background and aim

Persistent organochlorine pollutants (POPs) have in epidemiological studies been associated with health hazards. The exposure window might be crucial and it is, accordingly, important to analyze exposure concentrations in samples collected at the window of interest. This makes the use of stored blood samples extremely interesting. However, small blood volumes from stored samples in biobanks means that the researchers in epidemiological studies most often have to select a limited number of biomarkers representing the POP exposure and abstain from analyses of lipid concentrations. This raises the question of the necessity of lipid adjustment. The aim of the present study was to evaluate the correlation between fresh weight and lipid adjusted concentrations.

Methods

We included data from studies were we have used the PCB congener 2,2′,4,4′,5,5′-hexachlorobiphenyl (PCB-153) as a biomarker for POP exposure and where fresh weight as well as lipid adjusted PCB-153 concentrations are known (n = 1628). The variety of the cohort members in the different studies gave us the possibility to better understand how well these measures correlate.

Results

When all individuals were included in the analyses a correlation coefficient of 0.95 between fresh weight and lipid adjusted serum concentrations was obtained. Restricting the analyses to specific subgroups (based on gender, fasting status, age and BMI) gave correlation coefficients between 0.85 and 0.97.

Conclusions

This study does strongly support the use of samples from biobanks in epidemiological studies for analyzing PCBs, at least regarding PCB-153, even though it is not possible to lipid adjust the results.     

High concern chemicals in top layer sediments of the northern Adriatic seabed as markers of old waste dumpings

The results are presented of a survey planned to assess the presence of high concern chemicals in sediments collected in a northern sector of the Adriatic sea neighboring the Venice lagoon. For the assessment, persistent marker chemicals were selected from the families of polycyclic aromatic hydrocarbons, polychlorobiphenyls, polychlorodibenzo-p-dioxins (PCDDs), polychlorodibenzofurans (PCDFs), and chlorinated pesticides. Based on the chemical-specific concentrations and PCDD+PCDF profiles determined in the sediments analyzed, dumping zones appear to have existed approximately 5-6km away from lagoon shoreline. Contamination levels exceed the quality criteria established by the pertinent Italian national regulation at many sampling sites, eventually reflecting ("fingerprinting") industrial activities once performed in the industrial settlement of Porto Marghera within the Venice lagoon. In coastal samples, concentration levels appear to be lower than those determined at offshore sampling sites.     

Contribution of motor vehicle emissions to organic carbon and fine particle mass in Pittsburgh, Pennsylvania: Effects of varying source profiles and seasonal trends in ambient marker concentrations

We present estimates of the vehicular contribution to ambient organic carbon (OC) and fine particle mass (PM) in Pittsburgh, PA using the chemical mass balance (CMB) model and a large dataset of ambient molecular marker concentrations. Source profiles for CMB analysis are selected using a method of comparing the ambient ratios of marker species with published profiles for gasoline and diesel vehicle emissions. The ambient wintertime data cluster on a hopanes/EC ratio–ratio plot, and therefore can be explained by a large number of different source profile combinations. In contrast, the widely varying summer ambient ratios can be explained by a more limited number of source profile combinations. We present results for a number of different CMB scenarios, all of which perform well on the different statistical tests used to establish the quality of a CMB solution. The results illustrate how CMB estimates depend critically on the marker-to-OC and marker-to-PM ratios of the source profiles. The vehicular contribution in the winter is bounded between 13% and 20% of the ambient OC (274±56–416±72 ng-C m⁻³). However, variability in the diesel profiles creates uncertainty in the gasoline–diesel split. On an OC basis, one set of scenarios suggests gasoline dominance, while a second set indicates a more even split. On a PM basis, all solutions indicate a diesel-dominated split. The summer CMB solutions do not present a consistent picture given the seasonal shift and wide variation in the ambient hopanes-to-EC ratios relative to the source profiles. If one set of source profiles is applied to the entire dataset, gasoline vehicles dominate vehicular OC in the winter but diesel dominates in the summer. The seasonal pattern in the ambient hopanes-to-EC ratios may be caused by photochemical decay of hopanes in the summer or by seasonal changes in vehicle emission profiles.