A Comparison of Two Techniques for the Collection and Analysis of Polynuclear Aromatic Compounds in Ambient Air

A demonstration of the GHEMFIX solidification/stabilization process was conducted under the United States Environmental Protection Agency’s (EPA) Superfund Innovative Technology Evaluation (SITE) program. The demonstration was conducted in March 1989, at the Portable Equipment Salvage Company (PESC) uncontrolled hazardous waste site in Clackamas, Oregon. Waste containing lead, copper, and polychlorinated biphenyls (PCBs) from four different areas of the site were treated. Results showed substantial reduction of leachable lead and copper between the untreated waste and treated waste utilizing the EPA Toxicity Characteristics Leaching Procedure (TCLP) test. The effectiveness of this process for immobilizing PCBs could not be determined since the raw waste did not leach PCBs at high concentrations, utilizing the TCLP test. Data from other leaching tests for lead and copper would need to be utilized as input into a site specific groundwater model to determine whether solidification/stabilization would be an acceptable remedy for the site. Physical testing results indicated durability in exposed conditions.     

Downscaling scenarios of future land use and land cover changes using a participatory approach: an application to mountain risk assessment in the Pyrenees (France)

Regional Environmental Change - Better understanding the pathways through which future socioeconomic changes might influence land use and land cover changes (LULCCs) is a crucial step in accurately...     

Diffusion of PAH and PCB from contaminated sediments with and without mineral capping; measurement and modelling

A novel laboratory microcosm test was developed to measure the diffusion of native PAHs and PCBs from sediments in the presence and absence of a capping layer. Diffusive flux of 15 PAHs and 7 PCBs from uncapped sediment from Oslo harbour was 3.8+/-0.9 microg m(-2)d(-1) and 0.010+/-0.003 microg m(-2)d(-1), respectively. The flux from sediments capped with 1cm mineral cap (crushed limestone or crushed gneiss (0-2mm)), observed during the first 410 d, was 3.5-7.3% of the flux from uncapped sediments. By measuring freely dissolved pore water concentrations of 10 PAHs the flux in the microcosm was modelled with steady state and transient diffusion models. The measured flux from uncapped sediment was 27-290% of modelled steady state flux. Good agreement was also found between the measured flux of pyrene from capped sediment and the flux modelled with the transient model when fitting only with the distribution coefficients for pyrene between the cap material and water (Kd_pyr). Fitted Kd_pyr, (210 and 23 l kg(-1) for limestone and gneiss, respectively) was in the same order of magnitude as K(d) calculated from organic carbon content in the cap materials (68 and 14 l kg(-1) respectively). Calculation of the efficiency of a hypothetical cap with 10 cm diffusion path shows that the increased diffusion path length alone can yield a flux reduction >99% through a strong increase in the stagnant diffusive boundary layer from <1 to 100mm.     

Long-term land-cover/use change in a traditional farming landscape in Romania inferred from pollen data,historical maps and satellite images

Regional Environmental Change - Traditional farming landscapes in the temperate zone that have persisted for millennia can be exceptionally species-rich and are therefore key conservation targets....     

A framework for sustainable invasive species management: Environmental,social, and economic objectives

Applying the concept of sustainability to invasive species management (ISM) is challenging but necessary, given the increasing rates of invasion and the high costs of invasion impacts and control. To be sustainable, ISM must address environmental, social, and economic factors (or “pillars”) that influence the causes, impacts, and control of invasive species across multiple spatial and temporal scales. Although these pillars are generally acknowledged, their implementation is often limited by insufficient control options and significant economic and political constraints. In this paper, we outline specific objectives in each of these three “pillars” that, if incorporated into a management plan, will improve the plan’s likelihood of sustainability. We then examine three case studies that illustrate how these objectives can be effectively implemented. Each pillar reinforces the others, such that the inclusion of even a few of the outlined objectives will lead to more effective management that achieves ecological goals, while generating social support and long-term funding to maintain projects to completion. We encourage agency directors and policy-makers to consider sustainability principles when developing funding schemes, management agendas, and policy.     

EFFECTIVENESS OF DROUGHT POLICIES FOR MUNICIPAL WATER MANAGEMENT1

During the 1976–77 drought, three principal mechanisms were used to reduce water use in Utah communities: price increases, maximum monthly use restrictions, and restrictions on outdoor watering times. A regression model was developed to explain observed changes in water use, with price, type of restriction, household size, and summer rainfall as independent variables. For an average system, a 1 percent increase in price would reduce water use by 0.07 to 0.09 percent. A 1 percent increase in outdoor watering time restriction reduces use by 0.064 to 0.075 percent. A 1 percent increase in quantity restrictions leads to a reduction in water use of 0.014 to 0.054 percent. The effectiveness of rationing policies is influenced by system characteristics. For example, outdoor watering time restrictions were less effective in systems with above average household size and below average monthly use.     

The effects of pathway configuration, landmarks and stress on environmental cognition

The results of this study indicate that manipulations of the pathway grid configuration and landmark placement in a setting cause changes in environmental knowledge. These experimental manipulations were accomplished using a realistic, dynamic simulation technique at the Berkeley Environmental Simulation Laboratory. Measures of environmental knowledge include: memory for incidental information along the simulated urban route, accuracy of route maps, relocation memory for scenes along the route, and questionnaire measures. Data are also presented showing both positive and negative effects of stress from noise on the processes of environmental cognition.     

DEVELOPMENT OF WATERSIIED MODELS FOR TWO SIERRA NEVADA BASINS USING A GEOGRAPHIC INFORMATION SYSTEM1

ABSTRACT: Techniques were developed using vector and raster data in a geographic information system (GIS) to define the spatial variability of watershed characteristics in the north-central Sierra Nevada of California and Nevada and to assist in computing model input parameters. The U.S. Geological Survey's Precipitation-Runoff Modeling System, a physically based, distributed-parameter watershed model, simulates runoff for a basin by partitioning a watershed into areas that each have a homogeneous hydrologic response to precipitation or snowmelt. These land units, known as hydrologic-response units (HRU's), are characterized according to physical properties, such as altitude, slope, aspect, land cover, soils, and geology, and climate patterns. Digital data were used to develop a GIS data base and HRIJ classification for the American River and Carson River basins. The following criteria are used in delineating HRU's: (1) Data layers are hydrologically significant and have a resolution appropriate to the watershed's natural spatial variability, (2) the technique for delineating HRU's accommodates different classification criteria and is reproducible, and (3) HRU's are not limited by hydrographic-subbasin boundaries. HRU's so defined are spatially noncontiguous. The result is an objective, efficient methodology for characterizing a watershed and for delineating HRU's. Also, digital data can be analyzed and transformed to assist in defining parameters and in calibrating the model.