Apportioning black carbon to sources using highly time-resolved ambient measurements of organic molecular markers in Pittsburgh

We present highly time-resolved measurements of organic molecular markers in downtown Pittsburgh, which are used to investigate sources contributing to atmospheric aerosols in the area. Two-hour average concentrations of condensed-phase and semivolatile organic species were measured using a Thermal Desorption Aerosol GC/MS (TAG). Concentrations for mobile source markers like hopanes had regular diurnal and day-of-week patterns. Pairing high time-resolved measurements with meteorological data helped identify contributions from known point sources for markers correlated with wind direction. Black carbon (BC), volatile organic compounds (VOCs) and organic molecular markers were apportioned to sources using the Chemical Mass Balance (CMB) and Positive Matrix Factorization (PMF) receptor models. Diesel and gasoline mobile source factors were identified as the main sources of BC in the downtown Pittsburgh area, contributing 67% and 20% of the study-average BC. 13% of the BC was associated with a source factor tentatively identified as an industrial or regional source. The high time resolution of the TAG has the potential to provide important new insight into source apportionment efforts using organic molecular marker measurements.     

Mechanisms and chemistry of dye adsorption on manganese oxides-modified diatomite

The investigations into structural changes which occur during adsorbent modification and the adsorption mechanisms are essential for an effective design of adsorption systems. Manganese oxides were impregnated onto diatomite to form the type known as δ-birnessite. Initial investigations established the effectiveness of manganese oxides-modified diatomite (MOMD) to remove basic and reactive dyes from aqueous solution. The adsorption capacity of MOMD for methylene blue (MB), hydrolysed reactive black (RB) and hydrolysed reactive yellow (RY) was 320, 419, and 204 mg/g, respectively. Various analytical techniques were used to characterise the structure and the mechanisms of the dye adsorption process onto MOMD such as Fourier transform infrared (FTIR), X-ray diffraction (XRD) and atomic absorption spectrometry (A.A.). A small shift to higher values of the d-spacing of dye/MOMD was observed indicating that a small amount of the dye molecules were intercalated in the MOMD structure and other molecules were adsorbed on the external surface of MOMD. Two mechanisms of dye adsorption onto MOMD were proposed; intercalation of the dye in the octahedral layers and adsorption of the dye on the MOMD external surface. Moreover, the results demonstrated that the MOMD structure was changed upon insertion of MB and RY with an obvious decrease in the intensity of the second main peak of the MOMD X-ray pattern.     

Development and Comparison of Multiple Regression Models to Predict Bankfull Channel Dimensions for Use in Hydrologic Models

Channel dimensions are important input variables for many hydrologic models. As measurements of channel geometry are not available in most watersheds, they are often predicted using bankfull hydraulic geometry relationships. This study aims at improving existing equations that relate bankfull width, depth, and cross‐sectional area to drainage area (DA) without limiting their use to well‐gauged watersheds. We included seven additional variables in the equations that can be derived from data that are generally required by hydrologic models anyway and conducted several multiple regression analyses to identify the ideal combination of additional variables for nationwide and regional models for each Physiographic Division of the United States (U.S.). Results indicate that including the additional variables in the regression equations generally improves predictions considerably. The selection of relevant variables varies by Physiographic Division, but average annual precipitation (PCP) and temperature (TMP) were generally found to improve the models the most. Therefore, we recommend using regression equations with three independent variables (DA, PCP, and TMP) to predict bankfull channel dimensions for hydrologic models. Furthermore, we recommend using the regional equations for watersheds within regions from which data were used for model development, whereas in all other parts of the U.S. and the rest of the world, the nationwide equations should be given preference.     

Risk to water security for small islands: an assessment framework and application

The freshwater resources of small islands are particularly vulnerable to the impacts of climate change and human stressors due to their limited extent and adaptive capacity. A water security approach is useful for effective management of the water resources; however, understanding risk to water security is critical in order to effectively plan and adapt to future changes. Currently available assessment tools generally do not incorporate risk and are not suitable for application on small islands, where the hydrogeological setting has unique vulnerabilities. The aim of this work is to provide a framework to characterize risk to water security for small islands. The risk assessment was developed using Andros Island, the Bahamas, as a case study area. Numerical modelling characterizes the response of the water system to potential future stressors related to climate change and human development, the results of which are integrated into the assessment framework. Based on risk assessment principles, indicators are determined for susceptibility, hazard threat, vulnerability and loss, in order to define the risk to water security. The resulting indicators are presented in geospatial maps that rank areas of risk to water security. These maps were provided to local water managers and policy-makers in the Bahamas as a tool to identify high-risk areas for near-term action and to inform long-term planning. The maps have also been used as a platform to engage local residents and raise awareness about the impact climate change and land-use activities may have on water security.     

A Tale of Two Rivers: Implications of Water Management Practices for Mussel Biodiversity Outcomes During Droughts

Droughts often pose situations where stream water levels are lowest while human demand for water is highest. Here we present results of an observational study documenting changes in freshwater mussel communities in two southern US rivers during a multi-year drought. During a 13-year period water releases into the Kiamichi River from an impoundment were halted during droughts, while minimum releases from an impoundment were maintained in the Little River. The Kiamichi observed nearly twice as many low-flow events known to cause mussel mortality than the Little, and regression tree analyses suggest that this difference was influenced by reduced releases. During this period mussel communities in the Kiamichi declined in species richness and abundance, changes that were not observed in the Little. These results suggest that reduced releases during droughts likely led to mussel declines in one river, while maintaining reservoir releases may have sustained mussel populations in another.     

Voluntary GHG reduction of industrial sectors in Taiwan

The present paper describes the voluntary greenhouse gas (GHG) reduction agreements of six different industrial sectors in Taiwan, as well as the fluorinated gases (F-gas) reduction agreement of the semiconductor and Liquid Crystal Display (LCD) industries. The operating mechanisms, GHG reduction methods, capital investment, and investment effectiveness are also discussed. A total of 182 plants participated in the voluntary energy saving and GHG reduction in six industrial sectors (iron and steel, petrochemical, cement, paper, synthetic fiber, and textile printing and dyeing), with 5.35 Mt reduction from 2004 to 2008, or 33% higher than the target goal (4.02 Mt). The reduction accounts for 1.6% annual emission or 7.8% during the 5-yr span. The petrochemical industry accounts for 49% of the reduction, followed by the cement sector (21%) and the iron and steel industry (13%). The total investment amounted to approximately USD 716 million, in which, the majority of the investment went to the modification of the manufacturing process (89%). The benefit was valued at around USD 472 million with an average payback period of 1.5 yr. Moreover, related energy saving was achieved through different approaches, e.g., via electricity (iron and steel), steam and oil consumption (petrochemical) and coal usage (cement). The cost for unit CO₂ reduction varies per industry, with the steel and iron industrial sector having the highest cost (USD 346 t⁻¹ CO₂) compared with the average cost of the six industrial sectors (USD 134 t⁻¹ CO₂). For the semiconductor and Thin-Film Transistor LCD industries, F-gas emissions were reduced from approximately 4.1 to about 1.7 Mt CO₂-eq, and from 2.2 to about 1.1 Mt CO₂-eq, respectively. Incentive mechanisms for participation in GHG reduction are also further discussed.     

Polychlorinated biphenyls (PCBs) in Africa: a review of environmental levels

Several studies have shown an increase in PCB sources in Africa due to leakage and wrongly disposed transformers, continuing import of e-waste from countries of the North, shipwreck, and biomass burning. Techniques used in the recycling of waste such as melting and open burning to recover precious metals make PCBs contained in waste and other semivolatile organic substances prone to volatilization, which has resulted in an increase of PCB levels in air, blood, breast milk, and fish in several regions of Africa. Consequences for workers performing these activities without adequate measures of protection could result in adverse human health effects. Recent biodegradation studies in Africa have revealed the existence of exotic bacterial strains exhibiting unique and unusual PCB metabolic capability in terms of array of congeners that can serve as carbon source and diversity of congeners attacked, marking considerable progress in the development of effective bioremediation strategies for PCB-contaminated matrices such as sediments and soils in tropical regions. Action must be taken to find and deal with the major African sources of these pollutants. The precise sources of the PCB plume should be pinned down and used to complete the pollutant inventories of African countries. These nations must then be helped to safely dispose of the potentially dangerous chemicals.     

The Characterization of Ozone and Sulfur Dioxide Air Quality Data for Assessing Possible Vegetation Effects

Since the 1960s, much effort has been devoted to collecting and formatting air quality data. This paper discusses 1) the availability of air quality data for assessing potential biological impacts associated with ozone and sulfur dioxide ambient exposures, 2) examples of how air quality data can be characterized for assessing vegetation effects, and 3) the limitations associated with some exposure parameters used for developing relevant vegetation doseresponse yield reduction models. Data are presented showing that some ozone monitoring sites not continuously affected by local urban sources experience consecutive hourly ozone exposures ≥0.10 ppm in the late evening and early morning hours. These sites experience their maximum ozone concentrations either in the spring or summer months. Sites influenced by local rural sources experience their maximum ozone concentrations during the summer months. It is suggested that further research be performed to identify whether the sensitivity of a target organism at the time of exposure, as well as the pollutant concentration and chemical form that enters into the target organism, is as important in defining effects as air pollutant exposure alone.     

The Characterization of Ozone Data for Sites Located in Forested Areas of the Eastern United States

Six years (1978-1983) of ozone monitoring data from sites located within six forested areas were examined. Areas that experienced the lowest to the highest ozone exposures were located in (1) northern New England/New York and upper Great Lakes, (2) New York/Pennsylvania/Maryland, (3) southeastern/southern, and (4) New Jersey pinelands. In general, higher ozone concentrations were observed in 1978, 1980 and 1983 as compared to the other three years examined. Ozone concentrations varied considerably within the areas. Recommendations for additional ozone monitoring sites are made. A concentrated effort should be made to examine ozone monitoring data from subsequent years (1984, 1985, and 1986) to explore whether the 6-year period 1978 through 1983 is representative of the annual variability of ozone concentrations over eastern forested areas. To better understand the relationship between ozone exposure and possible forest effects, we recommend that the temporal distributions of elevated ozone concentrations over a growing season be examined. The occurrence of elevated ozone levels during specific growth periods during a season may be an important aspect that biologists may wish to explore.