Frequency of sublethal injury in a deepwater ophiuroid, <Emphasis Type="Italic">Ophiacantha bidentata</Emphasis>, an important component of western Atlantic <Emphasis Type="Italic">Lophelia</Emphasis> reef communities

The occurrence and relative abundance of tissue (arm) regeneration in the ophiuroid, Ophiacantha bidentata (Retzius), was examined in individuals collected primarily among colonies of the deep-water coral Lophelia pertusa off the southeastern United States. Seven deep-water coral sites (384–756 m), located between Cape Lookout, NC, and Cape Canaveral, FL, were sampled in June 2004 using a manned submersible. The presence of regenerative tissue was evaluated by visual inspection of each individual ophiuroid, and the proportion of regenerating arms per individual was examined relative to size of individual, geographic location, and depth of collection. Ophiacantha bidentata, the dominant brittle star collected, commonly displayed signs of sublethal injury with over 60% of individuals displaying some evidence of regeneration. These levels of regeneration rival those reported for shallow-water ophiuroids. Larger individuals (>6.5 mm disc size) had a higher incidence of regeneration than smaller individuals. Size of individual and percent of regeneration were negatively correlated with depth. Although O. bidentata was significantly less abundant in southern versus northern sites, ophiuroid abundance did not appear to be influenced by amount or density of coral substratum. Presence of dense aggregations of O. bidentata indicates that they are an important component of the invertebrate assemblage associated with deep-water coral habitat especially in the northern part of the study area. Assuming that observed frequencies of injury and subsequent regeneration represent predation events then dense ophiuroid aggregations in deep-water coral habitats represent an important renewable trophic resource within these communities.     

Environmental performance benchmarking for electric utilities

Electric utility companies in the United States and Canada are participating in a unique environmental benchmarking program (EBP) designed to comparatively assess environmental performance. Each company annually provides data on emissionslwastes, compliance, and other environmental aspects to an independent consultant, Research Triangle Institute (RTI), whose staff compiles the data and computes approximately 80 discrete environmental performance metrics for each company. RTI provides a confidential report for each participant presenting the results of the assessment. In addition, RTI conducts a follow-up assessment to determine “best-practices” of each of the top performers for each metric. The EBP provides each participant with useful information on its strengths and weaknesses relative to the other companies in the program as well as ideas on how to improve its environmental performance. Annual participation in the program allows a company to measure improvement in performance on an annual basis. This article summarizes the evolution of the EBP and describes the study methods and reporting approach. Our goal in sharing this information is to demonstrate the usefulness of the program and encourage further participation by all major North American electric utilities.     

Investigation of real-life operating patterns of wood-burning appliances using stack temperature data

ABSTRACT

A study was undertaken to identify patterns of consumer use of outdoor wood boilers or outdoor wood furnaces (technically referred to as outdoor wood-fired hydronic heaters (OWHHs)) and indoor wood stoves (IWSs) to inform the development of performance testing protocols that reflect real-life operating conditions. These devices are manually fed, and their usage protocols are a function of a number of variables, including user habits, household characteristics, and environmental factors. In this study, researchers logged the stack wall temperatures of 4 OWHH and 20 IWS units in the states of New York and Washington over two heating seasons. Stack wall temperature is an indicator of changes in combustion modes. Two algorithms were developed to identify usage modes and cold and warm start refueling events from the stack wall temperature time series. A linear correlation analysis was conducted to evaluate the effect of heat demand on usage patterns. The results and methods presented here will inform the cataloging of typical operational patterns of OWHHs and IWSs as a step in the development of performance testing procedures that represent actual in-home usage patterns.

Implications: Current US regulatory programs for residential wood heating use a certification program to assess emissions and efficiency performance. Testing under this program uses a test that burns 100% of a single, standardized wood fuel charge to assess performance at different steady-state load conditions. This study assessed in-field operational patterns to determine if the current certification approach accurately characterized typical homeowner use patterns. The data from this study can be used to inform revisions to testing methods to increase certification test comparability between lab and field performance.     

An empirical relationship between PM(2.5) and aerosol optical depth in Delhi Metropolitan

Atmospheric remote sensing offers a unique opportunity to compute indirect estimates of air quality, which are critically important for the management and surveillance of air quality in megacities of developing countries, particularly in India and China, which have experienced elevated concentration of air pollution but lack adequate spatial-temporal coverage of air pollution monitoring. This article examines the relationship between aerosol optical depth (AOD) estimated from satellite data at 5 km spatial resolution and the mass of fine particles ≤2.5 μm in aerodynamic diameter (PM(2.5)) monitored on the ground in Delhi Metropolitan where a series of environmental laws have been instituted in recent years.PM(2.5) monitored at 113 sites were collocated by time and space with the AOD computed using the data from Moderate Resolution Imaging Spectroradiometer (MODIS onboard the Terra satellite). MODIS data were acquired from NASA's Goddard Space Flight Center Earth Sciences Distributed Active Archive Center (DAAC). Our analysis shows a significant positive association between AOD and PM(2.5). After controlling for weather conditions, a 1% change in AOD explains 0.52±0.202% and 0.39±0.15% change in PM(2.5) monitored within ±45 and 150 min intervals of AOD data. This relationship will be used to estimate air quality surface for previous years, which will allow us to examine the time-space dynamics of air pollution in Delhi following recent air quality regulations, and to assess exposure to air pollution before and after the regulations and its impact on health.     

Inactivation of fungi associated with barley grain by gaseous ozone

The use of gaseous ozone as a fungicide to preserve stored barley was studied. The effects of the following operating parameters on the fungicidal efficacy of ozone were examined: 1) the applied ozone dose, 2) ozonation time, 3) water activity of barley, and 4) temperature of barley. The effect of ozonation on germination of barley was also investigated. The experimental results showed that ozone was very effective in inactivation of fungi associated with the barley regardless of whether the fungi were in the forms of spores or mycelia. However, the mycelia were less resistant to ozone. With 5 minutes of ozonation, 96% of inactivation were achieved for spores as well as for mixtures of spores and small amount of mycelia by applying 0.16 and 0.10 mg of ozone/(g barley) x min, respectively. In addition, for sealed storage silos, inactivation of fungi continued when the ozone-containing gas was held inside the silos following a continuous ozone supply. The experimental results also revealed that increases in water activity and temperature of barley enhanced the fungicidal efficacy of ozone. Results of this study also indicated that the inactivation processes could be controlled by simply monitoring the exit ozone from the reactor instead of performing the time-consuming microbial examination. This finding would make the application of ozone in the preservation of cereal grains easier, simpler, and more practically applicable. The experimental results demonstrated that although ozonation above certain strength may reduce barley germination, inactivation of fungi was achieved with ozonation strengths far below the critical point.     

Photochimie et environnement - V. Photohydrolyse du monochlorobenzene en solution aqueuse diluee

A primary photohydrolysis of monochlorobenzene into phenol in dilute aqueous solution is occuring quantitatively whatever the experimental conditions were: pH (1<pH<12), excitation wavelength (253.7 nm or 300 nm), presence or absence of oxygen, initial concentration (in the range 10^?4M – 4.10^?3 M). The initial quantum yield of appearance of phenol has been found to be 0.10 ± 0.02 at 253.7 nm, and 0.19 ± 0.06 at 300 nm. The excited state leading to phenol cannot be quenched by acetonitrile at concentration up to 1.9 M. An heterolytic scission of the C-Cl bond parallels the concerted scission of water; a photosubstitution mechanism cannot account for the observed phenomena, especially in acidic media.Monofluoro- and bromobenzene irradiated in degased solution undergo a similar photohydrolysis; the initial quantum yields of appearance of phenol are 0.003 ± 0.001 and 0.06 ± 0.01, respectively for fluoro- and bromobenzene.     

Degradation of RPA 202248 [U-14C-phenyl]alpha(-(cyclopropylcarbonyl)-2-(methylsulfonyl)-beta-oxo-4-(trifluromethyl)benzenepropanenitrile), the primary degradation product of isoxaflutole, in an outdoor aquatic microcosm system

Isoxaflutole, the active ingredient in BALANCE WDG and BALANCE PRO corn herbicides and a co-formulant with the herbicide flufenacet in the product EPIC, is readily degraded in soil and water to RPA 202248 alpha(-(cyclopropylcarbonyl)-2-(methyvlsulfonyl)-beta-oxo-4-(trifluromethyl)benzenepropanenitrile). Because RPA 202248 is responsible at the molecular level for isoxaflutole's herbicidal activity it is important to understand the environmental behavior of the degradation product. Laboratory studies suggest that RPA 202248 is stable to hydrolysis and photolysis in aqueous systems and hence poses a possible environmental concern. As part of a program of work towards understanding the actual field situation, an outdoor microcosm study was carried out. Over the course of the 29-day study, residues remained predominantly in the aqueous phase. A slow but steady degradation of RPA 202248 was observed leading to the formation of RPA 203328 (2-methylsulfonyl-4-trifluoromethylbenzoic acid), which has no herbicidal activity. The half-life of RPA 202248 was calculated to be 103 days. These findings indicate that aqueous degradation should be considered as a potential route of dissipation when assessing the fate of RPA 202248 in large scale impounded water bodies, such as ponds, lakes, or reservoirs in the Mid-West Corn Belt.     

Decolorizing of lignin wastewater using the photochemical UV/TiO2 process

Studies on applying the photochemical UV/TiO2 oxidation process to treat the lignin-containing wastewater for dissolved organic carbon (DOC), color and reducing A254 (the absorption at the wavelength of 254 nm) have been carried out. The data obtained in this study demonstrate that the UV/TiO2 process is effective in oxidizing the lignin thus reducing the color and DOC of the wastewater treated. The combined UV/TiO2 treatment can achieve better removal of DOC and color than the UV treatment alone. Color removal, based on American Dye Manufacture Index (ADMI) measurement, is greater than 99% if the pH is maintained at 3.0 with the addition of 1 g l(-1) TiO2. When 10 g l(-1) TiO2 is applied, the oxidation reduction potential (ORP) value is reached to result in an 88% removal of both DOC and color. A model was developed based on the variation of ORP during the photochemical reaction to simulate the decoloring process. The proposed model can be used to predict the color removal efficiency of the UV/TiO2 process.     

Persistence, distribution, and emission of Telone C35 injected into a Florida sandy soil as affected by moisture, organic matter, and plastic film cover

With the phase-out of methyl bromide scheduled for 2005, alternative fumigants are being sought. This study of Telone C35, a mixture of (Z)- and (E)-1,3-dichloropropene (1,3-D) with chloropicirin (CP), focuses on its emissions, distribution, and persistence in Florida sandy soil in microplots with different soil-water and organic matter carbon (C) content with and without two different plastic film mulches. The addition of CP did not affect the physical behavior of the isomers of 1,3-D. Slower subsurface dispersion and longer residence time of the mixed fumigant occurred at higher water content. An increase in the percent organic carbon in the soil led to a more rapid decrease for chloropicirin than for 1,3-dichloropene isomers. The use of a virtually impermeable film (VIF) for soil cover provided a more even distribution and longer persistence under all the conditions studied in comparison to polyethylene (PE) film cover or no cover. The conditions of near field capacity water content, low organic matter, and a virtually impermeable film cover yielded optimum conditions for the distribution, emission control, and persistence of Telone C35 in a Florida sandy soil.     

Assessment of the impact of rising carbon dioxide and other potential climate changes on vegetation

The projected doubling of current levels of atmospheric carbon dioxide concentration ([CO(2)]) during the next century along with increases in other radiatively active gases have led to predictions of increases in global air temperature and shifts in precipitation patterns. Additionally, stratospheric ozone depletion may result in increased ultraviolet-B (UV-B) radiation incident at the Earth's surface in some areas. Since these changes in the Earth's atmosphere may have profound effects on vegetation, the objectives of this paper are to summarize some of the recent research on plant responses to [CO(2)], temperature and UV-B radiation. Elevated [CO(2)] increases photosynthesis and usually results in increased biomass, and seed yield. The magnitude of these increases and the specific photosynthetic response depends on the plant species, and are strongly influenced by other environmental factors including temperature, light level, and the availability of water and nutrients. While elevated [CO(2)] reduces transpiration and increases photosynthetic water-use efficiency, increasing air temperature can result in greater water use, accelerated plant developmental rate, and shortened growth duration. Experiments on UV-B radiation exposure have demonstrated a wide range of photobiological responses among plants with decreases in photosynthesis and plant growth among more sensitive species. Although a few studies have addressed the interactive effects of [CO(2)] and temperature on plants, information on the effects of UV-B radiation at elevated [CO(2)] is scarce. Since [CO(2)], temperature and UV-B radiation may increase concurrently, more research is needed to determine plant responses to the interactive effects of these environmental variables.