Identifying the powers,players, and emotions associated with REDD+ implementation: The case of Guyana’s LCDS

REDD+ remains a critical tool for dealing with increasing levels of atmospheric carbon dioxide. Like other global-level initiatives, REDD+ has strong supporters and critics. Despite the division over its merits, little has been done to understand how a national-level audience responds to the program’s arrival in a partner country and which players drive a program’s implementation. Here we coded the archives of two Guyanese newspapers to identify the policy actors, institutions, and concepts (players) that drove the implementation of the country’s Low Carbon Development Strategy (LCDS). Two groups of players—super-key and key—dictated the direction of the LCDS implementation. Super-key players used the state-owned media to advocate their positions, while players who felt they would be punished by the LCDS implementation published their positions in the privately-owned media. Therefore, like responses to other global-level environmental challenges, views around the LCDS were divided.     

Treatment of 2,4-D, mecoprop, and dicamba using membrane bioreactor technology

Phenoxyacetic and benzoic acid herbicides are widely used agricultural, commercial, and domestic pesticides. As a result of high water solubility, mobility, and persistence, 2,4-dichlorophenoxyacetic acid (2,4-D), methylchlorophenoxypropionic acid (mecoprop), and 3,6-dichloro-2-methoxybenzoic acid (dicamba) have been detected in surface and waste waters across Canada. As current municipal wastewater treatment plants do not specifically address chronic, trace levels of contaminants like pesticides, an urgent need exists for an efficient, environmentally friendly means of breaking down these toxic herbicides. A commercially available herbicide mix, WeedEx, containing 2,4-D, mecoprop, and dicamba, was subjected to treatment using membrane bioreactor (MBR) technology. The three herbicides, in simulated wastewater with a chemical oxygen demand of 745 mg/L, were introduced to the MBR at concentrations ranging from 300 μg/L to 3.5 mg/L. Herbicides and biodegradation products were extracted from MBR effluent using solid-phase extraction followed by detection using high-performance liquid chromatography coupled with mass spectrometry. 2,4-D was reduced by more than 99.0 % within 12 days. Mecoprop and dicamba were more persistent and reduced by 69.0 and 75.4 %, respectively, after 112 days of treatment. Half-lives of 2,4-D, mecoprop and dicamba during the treatment were determined to be 1.9, 10.5, and 28.3 days, respectively. Important water quality parameters of the effluent such as dissolved oxygen, pH, ammonia, chemical oxygen demand, etc. were measured daily. MBR was demonstrated to be an environmentally friendly, compact, and efficient method for the treatment of toxic phenoxyacetic and benzoic acid herbicides.     

Particle Size Distribution of Settled Dust

In 1958, San Bernardino County Air Pollution Control District adopted rules and regulations for the control of dust, fumes and particulate matter. These were taken from ordinances which had been effectively used in other areas. After three years, experience showed that in some instances these rules and regulations should be modified to take into consideration the specific industrial operations in the county. A technical committee was appointed to examine this problem and concluded that a reasonable rule would be one that protects the public from the undesirable effects of dusts, fumes and particulate matter but would not impose an unnecessary burden on industry. Dustfall samples were collected at various locations throughout San Bernardino County and examined for particle-size distribution. In order to obtain reliable data, fairly large samples had to be collected in a short time. A 12 foot square plastic sheet was found suitable for sample collection. Particle size determinations were made with both the coulter counter and the Bahco microparticle classifier. The two methods yielded comparable results. It was found that settled dust particles for all practical considerations were all greater than 30 microns in equivalent diameter. Regulations based on these findings are being developed.     

An Evaluation of Emissions and Control Technologies for the Metal Decorating Process

Data are reported on a number of controlled and uncontrolled sources from various metal decorating operations. Emission levels are related to process variables such as ink coverage, coater speed, sheet size, and applied coating film weight. Results are presented depicting variation of organic emission levels from a coating process line with elapsed process time. For controlled sources employing either catalytic or thermal incineration, conversion efficiencies are reported as a function of temperature. Operational curves are presented for each control system studied indicating the dependence of carbon dioxide, NO_x, and organic output on incineration temperatures.     

Observations and Model Simulations of Carbon Monoxide Emission Factors from a California Highway

ABSTRACT

A series of twelve intensively monitored 1-hr CO dispersion studies were conducted near Davis, CA, in winter 1996. The experimental equipment included twelve CO sampling ports at elevations up to 50 m, three sonic anemometers, a tethersonde station, aircraft measurements of wind and temperature profile aloft, and a variety of conventional meteorological equipment. The study was designed to explore the role of vehicular exhaust buoyancy during worst-case meteorological conditions, such as low winds oriented in near-parallel alignment with the road during a surface-based nocturnal inversion. From the study, field estimates of the CO emission factor (EF) from a California vehicle fleet were computed using two different methods. The analysis suggests that the CT-EMFAC/ EMFAC (EMission FACtor) models currently used to conduct federal conformity modeling significantly overpredict CO emissions for high-speed, free-flowing traffic on California highways.     

Aerial application of copper for dothistroma control in New Zealand’s planted forests—effect on stream environments

Environmental Science and Pollution Research - Limited information is available on the risk to aquatic environments from the aerial application of copper fungicides to treat dothistroma needle...     

Levels of polybrominated diphenyl ethers (PBDEs) in dust from personal automobiles in conjunction with studies on the photochemical degradation of decabromodiphenyl ether (BDE-209)

The levels of 21 PBDE congeners were detemined in the dust sampled from 66 personal automobiles. The dominant congener in automobile dust was BDE-209 with a median level of 8.12 μg g?1. Personal vehicle dust samples contained the characteristic profile of the PBDE congeners that comprise the PentaBDE and DecaBDE commercial formulations. Levels of PBDEs in personal automobiles are generally reduced in comparison to our previously reported levels in resale vehicles on dealership lots presumably due to a dilution effect introduced by dust or debris that does not originate from the vehicle. Laboratory photochemical studies were conducted on both automobile dust collected from personal vehicles as well as BDE-209 adsorbed to sodium sulfate. No significant degradation occurred in the personal vehicle dust after 56 days of constant UVA irradiation while significant degradation did occur with BDE-209 adsorbed to sodium sulfate. PBDEs from the degradation of BDE-209 were identified and potential degradation pathways elucidated. Human exposure potential to PBDEs from automobile dust ingestion remains a serious concern in the U.S. population.     

The possibility of sustainable pest management by introducing bio-diversity: simulations of pest mite outbreak and regulation

Since the late 1980s, spider mite pests have caused serious damage to many moso bamboo (Phyllostachys pubescens) forests in China’s Fujian province. The culms of this plant are an essential component of the building and handicraft industries, and the shoots are a prized food item in many Asian countries. Furthermore, bamboo forests play an important soil conservation role in mountainous areas. We examined pest mite outbreaks in several moso bamboo plantations in Fujian, and could show that a change in cultivation style from polyculture (a kind of mixed forest) to monoculture (all plants other than bamboo were removed) was primarily responsible for the local extinction of an important predaceous mite species. This phenomenon is due to the periodic shedding of leaves by the bamboo, which forces the predator mites occurring on bamboo to switch to prey mite species that occur on other plants. We then tried to elucidate the factors that resulted from such a cultivation change. Adopting a computer simulation approach, we could successfully show that at least two plants, moso bamboo and Chinese silvergrass, are necessary to maintain stable predator–prey interactions in moso forests. That is, systems consisting of one common predator and two host-specific pest mites on different host plant species frequently became stable when the pest mites were at low density. This finding indicates clearly that bio-diversity, even when it consists of only two plants and three mite species as in this study, is necessary for the sustainable regulation of large-scale forests, such as moso bamboo plantations.     

Oxygen depletion in relation to water residence times

The relationship between residence time and oxygen saturation was investigated in a mesotidal lagoon in southern Portugal. The system receives no significant freshwater input during the summer months and has a high evaporation rate. These features enable an estimate of residence time from the salinity differences between ocean water entering the system and lagoon water. More than 10,000 GPS referenced measurements of oxygen saturation, temperature and salinity were made during large spring tides in September, 2006. The lowest oxygen saturation ( approximately 44%) was measured in the waters with the highest calculated residence times (7 days). There was a significant linear decrease in the oxygen saturation with increasing residence time of approximately 16% per day. This was similar to the rate measured on a neap tide in August, 2005. The high salinity, low oxygen saturated water was spatially confined to one inner channel, except at high water when this water was pushed into other channels. Although the tides investigated were the largest for several years, the oxygen saturation did not exceed 70% in this inner region. It is proposed that the direct discharge of oxygen consuming effluent, including domestic sewage, into this inner channel is responsible for this persistent oxygen deficit.     

Guiding principles for rewilding

There has been much recent interest in the concept of rewilding as a tool for nature conservation, but also confusion over the idea, which has limited its utility. We developed a unifying definition and 10 guiding principles for rewilding through a survey of 59 rewilding experts, a summary of key organizations’ rewilding visions, and workshops involving over 100 participants from around the world. The guiding principles convey that rewilding exits on a continuum of scale, connectivity, and level of human influence and aims to restore ecosystem structure and functions to achieve a self-sustaining autonomous nature. These principles clarify the concept of rewilding and improve its effectiveness as a tool to achieve global conservation targets, including those of the UN Decade on Ecosystem Restoration and post-2020 Global Biodiversity Framework. Finally, we suggest differences in rewilding perspectives lie largely in the extent to which it is seen as achievable and in specific interventions. An understanding of the context of rewilding projects is the key to success, and careful site-specific interpretations will help achieve the aims of rewilding.