Levels of polybrominated diphenyl ethers (PBDEs) in dust from personal automobiles in conjunction with studies on the photochemical degradation of decabromodiphenyl ether (BDE-209)

The levels of 21 PBDE congeners were detemined in the dust sampled from 66 personal automobiles. The dominant congener in automobile dust was BDE-209 with a median level of 8.12 μg g?1. Personal vehicle dust samples contained the characteristic profile of the PBDE congeners that comprise the PentaBDE and DecaBDE commercial formulations. Levels of PBDEs in personal automobiles are generally reduced in comparison to our previously reported levels in resale vehicles on dealership lots presumably due to a dilution effect introduced by dust or debris that does not originate from the vehicle. Laboratory photochemical studies were conducted on both automobile dust collected from personal vehicles as well as BDE-209 adsorbed to sodium sulfate. No significant degradation occurred in the personal vehicle dust after 56 days of constant UVA irradiation while significant degradation did occur with BDE-209 adsorbed to sodium sulfate. PBDEs from the degradation of BDE-209 were identified and potential degradation pathways elucidated. Human exposure potential to PBDEs from automobile dust ingestion remains a serious concern in the U.S. population.     

Particle Size Distribution of Settled Dust

In 1958, San Bernardino County Air Pollution Control District adopted rules and regulations for the control of dust, fumes and particulate matter. These were taken from ordinances which had been effectively used in other areas. After three years, experience showed that in some instances these rules and regulations should be modified to take into consideration the specific industrial operations in the county. A technical committee was appointed to examine this problem and concluded that a reasonable rule would be one that protects the public from the undesirable effects of dusts, fumes and particulate matter but would not impose an unnecessary burden on industry. Dustfall samples were collected at various locations throughout San Bernardino County and examined for particle-size distribution. In order to obtain reliable data, fairly large samples had to be collected in a short time. A 12 foot square plastic sheet was found suitable for sample collection. Particle size determinations were made with both the coulter counter and the Bahco microparticle classifier. The two methods yielded comparable results. It was found that settled dust particles for all practical considerations were all greater than 30 microns in equivalent diameter. Regulations based on these findings are being developed.     

An Evaluation of Emissions and Control Technologies for the Metal Decorating Process

Data are reported on a number of controlled and uncontrolled sources from various metal decorating operations. Emission levels are related to process variables such as ink coverage, coater speed, sheet size, and applied coating film weight. Results are presented depicting variation of organic emission levels from a coating process line with elapsed process time. For controlled sources employing either catalytic or thermal incineration, conversion efficiencies are reported as a function of temperature. Operational curves are presented for each control system studied indicating the dependence of carbon dioxide, NO_x, and organic output on incineration temperatures.     

Treatment of 2,4-D, mecoprop, and dicamba using membrane bioreactor technology

Phenoxyacetic and benzoic acid herbicides are widely used agricultural, commercial, and domestic pesticides. As a result of high water solubility, mobility, and persistence, 2,4-dichlorophenoxyacetic acid (2,4-D), methylchlorophenoxypropionic acid (mecoprop), and 3,6-dichloro-2-methoxybenzoic acid (dicamba) have been detected in surface and waste waters across Canada. As current municipal wastewater treatment plants do not specifically address chronic, trace levels of contaminants like pesticides, an urgent need exists for an efficient, environmentally friendly means of breaking down these toxic herbicides. A commercially available herbicide mix, WeedEx, containing 2,4-D, mecoprop, and dicamba, was subjected to treatment using membrane bioreactor (MBR) technology. The three herbicides, in simulated wastewater with a chemical oxygen demand of 745 mg/L, were introduced to the MBR at concentrations ranging from 300 μg/L to 3.5 mg/L. Herbicides and biodegradation products were extracted from MBR effluent using solid-phase extraction followed by detection using high-performance liquid chromatography coupled with mass spectrometry. 2,4-D was reduced by more than 99.0 % within 12 days. Mecoprop and dicamba were more persistent and reduced by 69.0 and 75.4 %, respectively, after 112 days of treatment. Half-lives of 2,4-D, mecoprop and dicamba during the treatment were determined to be 1.9, 10.5, and 28.3 days, respectively. Important water quality parameters of the effluent such as dissolved oxygen, pH, ammonia, chemical oxygen demand, etc. were measured daily. MBR was demonstrated to be an environmentally friendly, compact, and efficient method for the treatment of toxic phenoxyacetic and benzoic acid herbicides.     

Observations and Model Simulations of Carbon Monoxide Emission Factors from a California Highway

ABSTRACT

A series of twelve intensively monitored 1-hr CO dispersion studies were conducted near Davis, CA, in winter 1996. The experimental equipment included twelve CO sampling ports at elevations up to 50 m, three sonic anemometers, a tethersonde station, aircraft measurements of wind and temperature profile aloft, and a variety of conventional meteorological equipment. The study was designed to explore the role of vehicular exhaust buoyancy during worst-case meteorological conditions, such as low winds oriented in near-parallel alignment with the road during a surface-based nocturnal inversion. From the study, field estimates of the CO emission factor (EF) from a California vehicle fleet were computed using two different methods. The analysis suggests that the CT-EMFAC/ EMFAC (EMission FACtor) models currently used to conduct federal conformity modeling significantly overpredict CO emissions for high-speed, free-flowing traffic on California highways.     

The possibility of sustainable pest management by introducing bio-diversity: simulations of pest mite outbreak and regulation

Since the late 1980s, spider mite pests have caused serious damage to many moso bamboo (Phyllostachys pubescens) forests in China’s Fujian province. The culms of this plant are an essential component of the building and handicraft industries, and the shoots are a prized food item in many Asian countries. Furthermore, bamboo forests play an important soil conservation role in mountainous areas. We examined pest mite outbreaks in several moso bamboo plantations in Fujian, and could show that a change in cultivation style from polyculture (a kind of mixed forest) to monoculture (all plants other than bamboo were removed) was primarily responsible for the local extinction of an important predaceous mite species. This phenomenon is due to the periodic shedding of leaves by the bamboo, which forces the predator mites occurring on bamboo to switch to prey mite species that occur on other plants. We then tried to elucidate the factors that resulted from such a cultivation change. Adopting a computer simulation approach, we could successfully show that at least two plants, moso bamboo and Chinese silvergrass, are necessary to maintain stable predator–prey interactions in moso forests. That is, systems consisting of one common predator and two host-specific pest mites on different host plant species frequently became stable when the pest mites were at low density. This finding indicates clearly that bio-diversity, even when it consists of only two plants and three mite species as in this study, is necessary for the sustainable regulation of large-scale forests, such as moso bamboo plantations.     

采用自然及加速方法的环境驱动失效机制评估新聚合物产品的可靠性

本文讲述了对新产品进行可靠性评估的方法,这些产品因为受到环境的影响而失效。本方法适用于有参考产品现场数据、参考产品加速老化数据,并了解由环境引起失效机理的情况。该方法利用可靠性原理和失效机械一模型来建立高精度的模型,然后用它来预测新产品的使用寿命。本方法已成功应用于两个实例：一个是采用化学与物理方法证明聚烯烃的现场数据与加速氙灯老化仪所测得的数据具有相关性;另一个是评估乙烯基产品及现场驱动失效的故障模式。所得出的数据结果表明了环境区域风险、整体新产品风险。及与现有参考产品的相对风险。     

Extinction Rates of North American Freshwater Fauna

Abstract: Since 1900, 123 freshwater animal species have been recorded as extinct in North America. Hundreds of additional species of fishes, mollusks, crayfishes, and amphibians are considered imperiled. Using an exponential decay model, we derived recent and future extinction rates for North American freshwater fauna that are five times higher than those for terrestrial fauna. Assuming that imperiled freshwater species will not survive throughout the next century, our model projects a future extinction rate of 4% per decade, which suggests that North America's temperate freshwater ecosystems are being depleted of species as rapidly as tropical forests.     

GC/MS/MS分析复杂基体中痕量组分的优越性

在现代实验室中,GC/MS用于痕量分析极为普遍,要求更低的检测限而被分析样品的基体越来越复杂的情况由来已久.……     

Revisiting two dogmas of conservation science

Conservation science is a morally motivated field, with implicit and explicit values built into its practice. As such, conservationists must engage with conservation ethics to interrogate underlying values. We examine cutting-edge ecological science and contemporary ethics to revisit two conservation norms that have become dogmatic in the field: ecological collectives, but not individual animals, are valuable and anthropomorphism should be staunchly avoided. Emerging studies demonstrate that individuals and their intraspecific variation can be instrumentally valuable for conservation science, and there is an emerging consensus within environmental philosophy around the moral worth of individuals. Thus, we suggest conservation science should explicitly recognize the value of individuals. We also argue that avoiding anthropomorphism is detrimental to conservation because critical anthropomorphism enables a more nuanced scientific approach—allowing conservationists to ask enlightened questions with creativity and compassion. We provide evidence that both dogmatic norms are scientifically and morally outdated and propose new normative values to push conservation towards more robust science and ethical practice.