Simulating the influences of various fire regimes on caribou winter habitat.

Caribou are an integral component of high-latitude ecosystems and represent a major subsistence food source for many northern people. The availability and quality of winter habitat is critical to sustain these caribou populations. Caribou commonly use older spruce woodlands with adequate terrestrial lichen, a preferred winter forage, in the understory. Changes in climate and fire regime pose a significant threat to the long-term sustainability of this important winter habitat. Computer simulations performed with a spatially explicit vegetation succession model (ALFRESCO) indicate that changes in the frequency and extent of fire in interior Alaska may substantially impact the abundance and quality of winter habitat for caribou. We modeled four different fire scenarios and tracked the frequency, extent, and spatial distribution of the simulated fires and associated changes to vegetation composition and distribution. Our results suggest that shorter fire frequencies (i.e., less time between recurring fires) on the winter range of the Nelchina caribou herd in eastern interior Alaska will result in large decreases of available winter habitat, relative to that currently available, in both the short and long term. A 30% shortening of the fire frequency resulted in a 3.5-fold increase in the area burned annually and an associated 41% decrease in the amount of spruce-lichen forest found on the landscape. More importantly, simulations with more frequent fires produced a relatively immature forest age structure, compared to that which currently exists, with few stands older than 100 years. This age structure is at the lower limits of stand age classes preferred by caribou from the Nelchina herd. Projected changes in fire regime due to climate warming and/or additional prescribed burning could substantially alter the winter habitat of caribou in interior Alaska and lead to changes in winter range use and/or population dynamics.     

Introduction to the special issue on Advances in Life-Cycle Approachesto Business and Resource Management in the Asia-Pacific Region

This special issue of the Journal of Cleaner Production was initiated as a result of the 5th and 6th meetings of the Asia Pacific Roundtable for Sustainable Consumption and Production (APRSCP), which were held in Melbourne, Australia and Hanoi, Vietnam, respectively. A need identified at those meetings was to create another means of communicating the best ideas and papers being presented, to a wider audience. The Asia Pacific region has special development needs given its rapid emergence as a global production hub, but coupled to that are also the rapid social adjustments and shifts in patterns of consumption and production which aren't positive for the environment. This special issue contains eight papers covering the implementation of cleaner production and life cycle principles at the systems and regional planning level. These articles cover urban development, corporate CP programs, supply chain management, eco-industrial networks, and industrial parks, recycling, and understanding the role of human factors in bringing about environmental change.     

Statistical Issues for Monitoring Ecological and Natural Resources in the United States

The United States funds a number of national monitoring programs to measure the status and trends of ecological and natural resources. Each of these programs has a unique focus; the scientific objectives are different as are the sample designs. However, individuals and committees, all well aware of the cost of ecological monitoring, have called for more effective monitoring programs. The objective of this paper is to summarize existing programs' statistical designs and discuss potential alternatives for improvement in national monitoring. Can we improve the current situation by providing an overall framework for the design or analysis of data from these disparate surveys? First, the paper summarizes the objectives of these surveys, compares and contrasts their survey designs as currently implemented, and determines what variables they collect. Through this process we identify commonalities and issues that impact our ability to combine information across one or more of the surveys. Three potential alternatives are presented, leading to comprehensive monitoring in the United States.     

Polybrominated diphenyl ether (PBDE) levels in dust from previously owned automobiles at United States dealerships

The levels of BDE-28, BDE-47, BDE-99, BDE-100, BDE-153, BDE-154, BDE-183, and BDE-209 were determined in the dust sampled from 60 automobiles that were available for resale at U.S. dealerships. The dominant congener in automobile dust was BDE-209 comprising 95% of the total PBDE levels with a median level of 48.1 µg g^? 1. Statistical analysis of the vehicle attributes indicates that the BDE-209 levels are different (p < 0.05) with respect to groupings by vehicle model year, vehicle manufacturer, and the country of manufacture. Vehicle dust samples contained the characteristic profile of the PBDE congeners that comprise the PentaBDE formulation. While DecaBDE use is banned in Maine and Washington and is targeted for restriction in the near future by six U.S. states, vehicles and airplanes are exempt from the ban. It is anticipated that the human exposure potential to PBDEs from automobile dust ingestion will continue for an indefinite future period in the U.S. population.     

A Comparison of Data Sets Varying in Spatial Accuracy Used to Predict the Occurrence of Wildlife-Vehicle Collisions

Wildlife-vehicle collisions (WVCs) pose a significant safety and conservation concern in areas where high-traffic roads are situated adjacent to wildlife habitat. Improving transportation safety, accurately planning highway mitigation, and identifying key habitat linkage areas may all depend on the quality of WVC data collection. Two common approaches to describe the location of WVCs are spatially accurate data derived from global positioning systems (GPS) or vehicle odometer measurements and less accurate road-marker data derived from reference points (e.g., mile-markers or landmarks) along the roadside. In addition, there are two common variable types used to predict WVC locations: (1) field-derived, site-specific measurements and (2) geographic information system (GIS)-derived information. It is unclear whether these different approaches produce similar results when attempting to identify and explain the location of WVCs. Our first objective was to determine and compare the spatial error found in road-marker data (in our case the closest mile-marker) and landmark-referenced data. Our second objective was to evaluate the performance of models explaining high- and low-probability WVC locations, using congruent, spatially accurate (<3-m) and road-marker (<800-m) response variables in combination with field- and GIS-derived explanatory variables. Our WVC data sets were comprised of ungulate collisions and were located along five major roads in the central Canadian Rocky Mountains. We found that spatial error (mean ± SD) was higher for WVC data referenced to nearby landmarks (516 ± 808 m) than for data referenced to the closest mile-marker data (401 ± 219 m). The top-performing model using the spatially accurate WVC locations contained all explanatory variable types, whereas GIS-derived variables were only influential in the best road-marker model and the spatially accurate reduced model. Our study showed that spatial error and sample size, using road-marker data for ungulate species, are important to consider for model output interpretation, which will impact the appropriate scale on which to apply modeling results. Using road-marker references <1.6 km or GPS-derived data locations may represent an optimal compromise between data acquisition costs and analytical performance. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Measurement of real time black carbon for investigating spot loading effects of Aethalometer data

Measurements of real-time continuous PM_2.5 black carbon (BC) concentrations were made using a single-wavelength Aethalometer (@880 nm) in three different environments, i.e., an indoor office, a residential indoor living room and an urban site, to evaluate the difference in temporal behaviors of BC particles and investigate the optical shadowing effect in the Aethalometer BC data. An empirical method was used for correcting the optical saturation effect on the original BC data obtained from the measurements at the three sites. Also, the elemental carbon (EC) concentrations from 24-h filter-based measurements of PM_2.5 particles were determined using a thermal optical transmittance (TOT) method at the same urban site for comparison with the Aethalometer BC results. Transient events of BC were often observed for period of a few hours at all sites, reaching a maximum level of 27.3 μg m^?3 at the urban site. The diurnal cycles of the BC concentrations observed at the two indoor environments were found to be considerably affected by the air exchange rate, occupants' behavior patterns and nearby traffic emissions. The time-series plots of the Aethalometer data showed obvious discontinuities at the filter spot change, and a rise in the apparent BC concentrations after filter tape advances. Also, the relationship between the attenuation and BC concentration was found to be non-linear at all sites. The empirical approach presented here demonstrated a definite improvement in the continuity of the BC data across the time gaps of each tape advance. The compensated BC concentration was 1.10–1.23 times greater than the raw BC data, depending on the observation sites, with the highest difference observed between the raw and compensated BC data at an indoor office near a small traffic road. The 24-h integrated EC concentration was approximately 12% higher than the original 24-h average BC concentration and 6% lower than the loading compensated BC concentration, showing that the loading compensation process accounted for the saturation effect of the filter tape.     

Tackling Contentious Invasive Plant Species: A Case Study of Buffel Grass in Australia

Introduced plants that have both production values and negative impacts can be contentious. Generally they are either treated as weeds and their use prohibited; or unfettered exploitation is permitted and land managers must individually contend with any negative effects. Buffel grass (Cenchrus ciliaris) is contentious in Australia and there has been no attempt to broadly and systematically address the issues surrounding it. However, recent research indicates that there is some mutual acceptance by proponents and opponents of each others’ perspectives and we contend that this provides the basis for a national approach. It would require thorough and on-going consultation with stakeholders and development of realistic goals that are applicable across a range of scales and responsive to regional differences in costs, benefits and socio-economic and biophysical circumstances. It would be necessary to clearly allocate responsibilities and ascertain the most appropriate balance between legislative and non-legislative mechanisms. A national approach could involve avoiding the introduction of additional genetic material, countering proliferation in regions where the species is sparse, preventing incursion into conservation reserves where it is absent, containing strategically located populations and managing communities to prevent or reduce dominance by buffel grass. This approach could be applied to other contentious plant species.