Triclosan in individual human milk samples from Australia

Triclosan is a chlorinated phenol ether that has been in widespread use as a broad-spectrum antibacterial agent for four decades. When compared to the limited international data available on human body burden of triclosan, results from a pooled blood study suggested that triclosan concentrations in Australia were a factor two higher than observed in Sweden. This study determined triclosan levels in individual human milk samples (n = 151) collected between 2002 and 2005 from primiparous Australian mothers. It provided the first report of population triclosan levels and individual variation in Australia and gave a measure of infant exposure via breast feeding. The distribution of triclosan concentration was positively skewed, with 7.2% of the samples below the LOQ, 66% with a concentration of less than or equal to 1.0 ng g⁻¹ fresh weight and the remaining samples above 1 ng g⁻¹ reaching a maximum concentration of 19 ng g⁻¹ fresh weight. The mean and median triclosan concentrations were 1.3 ± 2.7 ng g⁻¹ f.w. and 0.26 ng g⁻¹ f.w., respectively. The results of this study showed high variability in triclosan concentrations between individuals and no correlations with maternal age (p = 0.094), maternal weight (p = 0.971) or infant age at the time of sample collection (p = 0.621). A large number of samples contained low or non-quantifiable concentrations of triclosan and so, in Australia, ubiquitous background exposure due to environmental sources is low. This means that body burden can be influenced by an individual’s use of triclosan containing product. Given that triclosan containing product use is continuing, it is important that monitoring in both humans and the environment is continued and that triclosan containing products are adequately labeled so that an individual can choose to avoid exposure.     

Placental transfer of polychlorinated biphenyls, their hydroxylated metabolites and pentachlorophenol in pregnant women from eastern Slovakia

The aim of the present study was to understand the placental transfer of polychlorinated biphenyls (PCBs), specific hydroxylated PCB metabolites (OH-PCBs), and pentachlorophenol (PCP) in blood serum, in a birth cohort from eastern Slovakia. During the period 2002-2004, cord blood specimens were collected in parallel with maternal specimens from women delivering in the two eastern Slovak districts of Michalovce and Svidnik/Stropkov. A total of 92 pairs of mother-cord specimens at delivery were selected for this study. 4-OH-CB107, 3-OH-CB153, 4-OH-CB146, 3'-OH-CB138, 4-OH-CB187, and 4'-OH-CB172 were quantified. The median concentrations of Sigma(17)PCBs, Sigma(6)OH-PCBs, and PCP in cord serum were 0.92, 0.33, and 0.69 ng/g wet wt., respectively and highly correlated with the corresponding maternal serum levels (correlations were R(2)=0.61, 0.78, and 0.82, respectively). The median cord to mother ratios of the Sigma(17)PCBs, Sigma(6)OH-PCBs, and PCP were 0.18, 0.75, and 1.10, respectively. The median ratio of the Sigma(6)OH-PCBs to the Sigma(17) PCBs in the cord serum was 0.38 from wet weight based concentrations, which was about four times higher than the ratio of these compounds in maternal serum (0.09). PCP was more abundant than any PCB or OH-PCB congener measured in cord serum. The higher cord to maternal ratios of OH-PCB metabolites as compared with the parent compounds suggests either a higher placental transfer rate or greater metabolism in the fetus as compared with the maternal compartment. These findings are consistent with their preferential binding to TTR that can cross the placenta. The cord to maternal ratio varies by congener (e.g., 4-OH-CB107=0.58, 4-OH-CB146=0.74, 3'-OH-CB138=1.01).     

Equilibrium sampling: partitioning of organochlorine compounds from lipids into polydimethylsiloxane

Polydimethylsiloxane (PDMS) can be used for equilibrium sampling of environmental pollutants in a large variety of matrices including biota. For comparison with lipid-normalized concentrations e.g. from biota monitoring programmes, reliable lipid to PDMS partition ratios (K(Lipid,PDMS)) are required. Additionally, K(Lipid,PDMS) facilitate comparison of equilibrium sampling data obtained in various environmental media and can be helpful to convert equilibrium sampling data into a more informative form. This work investigated the equilibrium partitioning of polychlorinated biphenyls (PCBs) and selected organochlorine pesticides (OCPs) between lipids from biota of different trophic levels and PDMS. One vegetable oil, a fish oil and seal oil were investigated. The lipid to PDMS partition ratios were compound-specific and ranged from 14.5 to 62.9 g/g with correction for lipid uptake into the PDMS and from 13.0 to 54.8 g/g without correction. Additionally, PDMS served as a reference partitioning phase for the accurate determination of lipid to lipid partition ratios, which for all analytes were close to unity. Evaluating the results in a bioaccumulation context, they indicate that the equilibrium partitioning of neutral lipophilic environmental contaminants into the lipids of the three investigated species will be very similar, although they represent three distinct trophic levels.     

Cyclic volatile methylsiloxanes in fish from the Baltic Sea

Laboratory studies suggest that the cyclic volatile methylsiloxanes (cVMS) octamethylcyclotetrasiloxane (D4), decamethylcyclopentasiloxane (D5) and dodecamethylcyclohexasiloxane (D6) will persist in the aquatic environment and bioaccumulate in fish. Here these cVMS were measured in herring collected in the Swedish waters of the Baltic Sea and the North Sea and in grey seals from the Baltic Proper. D4, D5, and D6 were present in herring muscle at concentrations around 10, 200, and 40 ng g⁻¹ lipid weight, respectively. The ratio of these concentrations was similar to the relative magnitude of estimated emissions to water, suggesting that the efficiency of overall transfer through the environment and food web was similar (within a factor 2–3) for the three chemicals. The concentrations of D5 and D6 were similar in herring caught in the highly populated Baltic Proper and in the less populated Bothnian Sea and Bothnian Bay. The D4 concentrations were lower at the most remote northern station, suggesting that D4 is less persistent than D5 and D6. Herring from the North Sea had lower levels of all three chemicals. The concentrations of D4, D5 and D6 in grey seal blubber were lower than the lipid normalized concentrations in herring, indicating that they do not biomagnify in grey seals.     

Decabromodiphenyl ethane and decabromodiphenyl ether in Swedish background air

Decabromodiphenyl ethane (DPDPE) is a flame retardant that has been on the market for more than 20 years and is used as a replacement for decabromodiphenyl ether (BDE-209). Environmental data on DPDPE are scarce but for BDE-209, studies have shown that long-range transport in the atmosphere leads to contamination of remote regions. Given their similar physical-chemical properties, we hypothesized that this is also true for DPDPE. In this study we explored the European continent as a source for DBDPE by collecting air samples at a back-ground location in southern Sweden. Twelve samples with stable air mass back trajectories over the 24 h sampling period were analysed. BDE-209 and 5 polycyclic aromatic hydrocarbons (PAHs) were also included in the study. The concentration ranges of DBDPE and BDE-209 were similar, 0.077-7.9 and 0.093-1.8 pg m⁻³ air, respectively. The highest concentrations were detected when the air originated from the European continent and the lowest during periods with rather stagnant air over southern Scandinavia. The concentrations of DBDPE and BDE-209 did not co-vary, indicating that there are different major sources of the two compounds. In air, the compounds measured in this study are predominantly associated with particles. PAHs in the atmosphere are known to originate primarily from combustion processes and their concentrations were highly correlated with several measures of atmospheric particle concentration, i.e. PM 10, PM 2.5, soot, and N 450 (number of particles in the size range approximately 420-450 nm). No clear correlations were found between the concentrations of DBDPE or BDE-209 and any of the measures of particle concentrations, indicating that the emissions of these are not related to the major sources of emissions of soot or small particles.     

Patterns of development and succession of vegetated hummocks in slacks of the Alexandria coastal dune field, South Africa

Dune hummocks (small aeolian dunes formed by sand deposition in and around pioneer plants) are the smallest vegetated dune unit; they occur along the entire South African coastline but are poorly studied. Structural properties and distribution of the two main hummock-forming plants:Arctotheca populifolia (a pioneer species with fast growth rate and rapid turnover) andGazania rigens (a later colonizer with slower growth) were investigated. A marked vegetation succession exists across the floor of the slack as a result of the migration of transverse dune ridges across the slack.Arctotheca hummocks were initiated on the newly exposed eastern margin of the slack, and were replaced about midway across the width of the slack byGazania hummocks. Hummocks increased in size with distance from the eastern side of the slack.Gazania hummocks attain a greater vegetation height, support a greater vegetation complexity and mass, and attain a larger maximum size thanArctotheca hummocks. Succession, defined as both the replacement of plant species as well as site modification within the plants over time, was evident. Since the growth form and dynamics determine (1) the ability of plants to trap wind-borne soil and detritus, (2) the shape of the hummocks, and (3) the habitat complexity available to spiders and insects, the ecology of the hummocks is probably determined largely by the vegetation characteristics of the hummock-forming plants.     

Endocrine disrupting chemicals in New Orleans surface waters and Mississippi Sound sediments

Endocrine disrupting compounds (EDCs), represented by steroid hormones, organochlorine pesticides (OCPs), polychlorinated biphenyls (PCBs), and bisphenol A have been determined in four sediment cores from the Gulf of Mexico, from New Orleans surface water (Lake Pontchartrain and Mississippi River), and from the influent and effluent of a New Orleans municipal sewage treatment plant. During the five-month monitoring of selected EDCs in the Mississippi River (MR) and Lake Pontchartrain (LP) in 2008, 21 of 29 OCPs in MR and 17 of 29 OCPs in LP were detected; bisphenol A was detected in all of the samples. Steroid hormones (estrone, 17β-estradiol and 17α-ethinylestradiol) were detected occasionally. Total EDC (OCPs + PCBs + steroid hormones + bisphenol A) concentrations in the two surface water samples were found to vary from 148 to 1112 ng L(-1). Strong correlation of the distribution of total OCPs, total PCBs and total EDCs between solid and water phases was found in LP, while moderate or no correlation existed in MR. OCPs, PCBs, steroid hormones, and bisphenol A were all detected in the ocean sediments, and total EDCs were measured in the range of 77 to 1796 ng g(-1) dry sediment weight. The EDCs were also found in untreated and treated municipal sewage samples with a removal efficiency of 83% for OCPs but no removal efficiency for 17α-ethinylestradiol.     

Assessment of Allowable Thermal Load for a River Reservoir Subject to Multi-Source Thermal Discharge from Operating and Designed Beloyarsk NPP Units (South Ural,Russian Federation)

This study develops a quantitative approach to the establishment of a maximum allowable thermal discharge into a freshwater body (the Beloyarsk Reservoir) incorporated in the once-through cooling technology at the Beloyarsk nuclear power plant (NPP) (South Urals, Russian Federation). The study is based on a 3-D hydrodynamic model, embracing water circulation, heat transfer, and ice-cover formation in the Beloyarsk Reservoir. The model is driven by atmospheric forcing, river runoff, and the discharge/intake of NPP cooling water. It was used to simulate the horizontal and vertical distribution of water temperature under the effect of the operation of existing (number 3) and anticipated (numbers 4 and 5) nuclear power units. The model is validated by the comparison of the computation results with observed water temperature distribution and ice-cover configuration obtained with remote sensing techniques. The model was also used to predict the future evolution of water temperature after the launching of two new power units, which, having a common cooling system, may affect each other. It was shown that the first of the new units, no. 4, will not dramatically affect the existing thermal conditions in the reservoir, while launching one more unit, no. 5, will apparently result in overheating of the reservoir water in response to the greater volume of cooling-water discharge from the two power units. Because of a specific configuration of the recirculation flow, the reservoir may fail to cope with the dissipation of the generated heat, leading to a steady (uncontrolled) rise of water temperature in the inlet channel to one of the power units. This will reduce the potential of NPP, using the once-through cooling technology, and will most likely have an adverse effect on the survival of aquatic organisms in the Beloyarsk Reservoir. Therefore, some other environment-saving technologies must be developed for removing surplus heat from the unit no. 5 of the Beloyarsk NPP.     

Pricing landfill externalities: emissions and disamenity costs in Cape Town, South Africa

The external (environmental and social) costs of landfilling (e.g. emissions to air, soil and water; and 'disamenities' such as odours and pests) are difficult to quantify in monetary terms, and are therefore not generally reflected in waste disposal charges or taken into account in decision making regarding waste management options. This results in a bias against alternatives such as recycling, which may be more expensive than landfilling from a purely financial perspective, but preferable from an environmental and social perspective. There is therefore a need to quantify external costs in monetary terms, so that different disposal options can be compared on the basis of their overall costs to society (financial plus external costs). This study attempts to estimate the external costs of landfilling in the City of Cape Town for different scenarios, using the benefits transfer method (for emissions) and the hedonic pricing method (for disamenities). Both methods (in particular the process of transferring and adjusting estimates from one study site to another) are described in detail, allowing the procedures to be replicated elsewhere. The results show that external costs are currently R111 (in South African Rands, or approximately US$16) per tonne of waste, although these could decline under a scenario in which energy is recovered, or in which the existing urban landfills are replaced with a new regional landfill.