The cost-effectiveness of residential radon remediation programmes: assumptions about benefits stream profiles over time

A recent cost-effectiveness analysis of a residential radon remediation programme considered and highlighted many areas of uncertainty in the parameters chosen for the analysis. One assumption not challenged in the study was the benefits stream profile adopted. There are several different ways of loading the benefits in terms of life years into the cost-effectiveness model and several of these are explored and the results are reported in this study. The benefits profile depends upon the lead-time to cancer manifestation post environmental carcinogen (radon) exposure. The literature reviewed suggests that there are many options for loading benefits to radon-induced lung cancer prevention programmes. In this study, the alternative benefits stream profiles are explored and their implications for the cost-effectiveness ratio are examined. Adopting different benefits stream profiles to the model results in a range of cost-effectiveness ratios from 14912.90 pounds per life year gained to 52416.27 pounds per life year gained. The preferred model is reported where the life years gained are assumed to be equally distributed over the last 15 years of the 40-year time horizon of the analysis (Y25-40) and the corresponding cost-effectiveness ratio is 37,943 pounds per life year gained.     

Reducing the healthcare costs of urban air pollution: the South African experience

Air pollutants often have adverse effects on human health. This paper investigates and ranks a set of policy and technological interventions intended to reduce such health costs in the high population density areas of South Africa. It initially uses a simple benefit-cost rule, later extended to capture sectoral employment impacts. Although the focus of state air quality legislation is on industrial pollutants, the most efficient interventions were found to be at household level. These included such low-cost interventions as training householders to place kindling above rather than below the coal in a fireplace and insulating roofs. The first non-household policies to emerge involved vehicle fuels and technologies. Most proposed industrial interventions failed a simple cost-benefit test. The paper's policy messages are that interventions should begin with households and that further industry controls are not yet justifiable in their present forms as these relate to the health care costs of such interventions.     

The effects of geology and the impact of seasonal correction factors on indoor radon levels: a case study approach

Geology has been highlighted by a number of authors as a key factor in high indoor radon levels. In the light of this, this study examines the application of seasonal correction factors to indoor radon concentrations in the UK. This practice is based on an extensive database gathered by the National Radiological Protection Board over the years (small-scale surveys began in 1976 and continued with a larger scale survey in 1988) and reflects well known seasonal variations observed in indoor radon levels. However, due to the complexity of underlying geology (the UK arguably has the world's most complex solid and surficial geology over the shortest distances) and considerable variations in permeability of underlying materials it is clear that there are a significant number of occurrences where the application of a seasonal correction factor may give rise to over-estimated or under-estimated radon levels. Therefore, the practice of applying a seasonal correction should be one that is undertaken with caution, or not at all. This work is based on case studies taken from the Northamptonshire region and comparisons made to other permeable geologies in the UK.     

Independent effects of fragmentation on forest songbirds: an organism-based approach.

The degree to which spatial patterns influence the dynamics and distribution of populations is a central question in ecology. This question is even more pressing in the context of rapid habitat loss and fragmentation, which threaten global biodiversity. However, the relative influence of habitat loss and landscape fragmentation, the spatial patterning of remaining habitat, remains unclear. If landscape pattern affects population size, managers may be able to design landscapes that mitigate habitat loss. We present the results of a mensurative experiment designed to test four habitat loss vs. fragmentation hypotheses. Unlike previous studies, we measured landscape structure using quantitative, spatially explicit habitat distribution models previously developed for two species: Blackburnian Warbler (Dendroica fusca) and Ovenbird (Seiurus aurocapilla). We used a stratified sampling design that reduced the confounding of habitat amount and fragmentation variables. Occurrence and reoccurrence of both species were strongly influenced by characteristics at scales greater than the individual territory, indicating little support for the random-sample hypothesis. However, the type and spatial extent of landscape influence differed. Both occurrence and reoccurrence of Blackburnian Warblers were influenced by the amount of poor-quality matrix at 300- and 2000-m spatial extents. The occurrence and reoccurrence of Ovenbirds depended on a landscape pattern variable, patch size, but only in cases when patches were isolated. These results support the hypothesis that landscape pattern is important for some species only when the amount of suitable habitat is low. Although theoretical models have predicted such an interaction between landscape fragmentation and composition, to our knowledge this is the first study to report empirical evidence of such nonlinear fragmentation effects. Defining landscapes quantitatively from an organism-based perspective may increase power to detect fragmentation effects, particularly in forest mosaics where boundaries between patches and matrix are ambiguous. Our results indicate that manipulating landscape pattern may reduce negative impacts of habitat loss for Ovenbird, but not Blackburnian Warbler. We emphasize that most variance in the occurrence of both species was explained by local scale or landscape composition variables rather than variables reflecting landscape pattern.     

Colloid migration in symmetrical non-uniform fractures: particle tracking in three dimensions

A three-dimensional model for the migration of colloids in a saturated fracture is presented, which considers the motion of colloids as a result of advection and diffusion, as well as colloid-surface interactions at the fracture walls. This model is successfully incorporated into a three-dimensional particle tracking algorithm that tracks particles within a continuum and allows consideration of the migration of colloids in symmetrical, three-dimensional, non-uniform fractures. The framework is general enough to incorporate non-local interactions that provide colloid motion relative to the fluid. The algorithm is verified against classical Taylor dispersion, and its generalization to a sorbing phase, in a uniform fracture and shows excellent agreement with theory. A simple, non-uniform fracture that has an analytically tractable velocity field is also considered, and both quantitative and qualitative comparisons are made with the uniform fracture case. The modelling of more complex fracture geometries is also discussed and a particular case is implemented within the particle tracking framework.     

Comparison of PM2.5 carbon measurement methods in Hong Kong, China

Samples from Hong Kong, China, were analyzed for organic carbon (OC), elemental carbon (EC), and total carbon (TC) by three thermal protocols (low-temperature IMPROVE and high-temperature STN and NIOSH) and two optical monitoring methods: reflectance and transmittance. Good agreement (+/-10%) for TC among the three protocols was observed for sample loadings of 1-55 microg m(-3). The two protocols using a reflectance pyrolysis correction showed best agreement for EC, with <20% differences found for approximately 80% of the samples. Hong Kong has a large diesel fleet, and for some heavily loaded samples the light transmittance was too low for quantitative detection, resulting in large uncertainties in the OC/EC split based on transmittance. Hong Kong experienced OC levels similar to those at US sites, but has much higher EC concentrations. OC/EC ratios range from 2 to 5 at two US sites and from 0.2 to 1.2 at three Hong Kong sites.     

Application of environmentally conscious manufacturing strategies for an automotive component

Application of appropriate environmentally conscious manufacturing strategies enables the sustainable development of products and processes. Automotive component manufacturers recognise the potential of applying appropriate strategies for attaining Triple Bottom Line benefits. In this context, three strategies such as eco-efficiency, waste minimisation and material efficiency are being applied to minimise environmental impacts associated with the manufacture of automotive products and its associated processes. A case study of an automotive component manufacturing firm has been exemplified. After conducting the study, the potential environmental impact was reduced by 20% and eco-efficiency was improved by 13%. Further, improvements have been observed in terms of overall resource consumption and material efficiency. The overall power consumption was reduced by 18% and weight of the component was reduced by 11%. The study aimed at improving the sustainable performance of product by incorporating green and environmentally friendlier manufacturing practices.

Abbreviations: USEPA: United Nations Environmental Protection Agency; OECD: Organisation for Economic Co-operation and Development; WBCSD: World Business Council for Sustainable Development; Eco-QFD: Environmental Quality Function Deployment; WCED: World Commission on Environment and Development; LCA: Life Cycle Assessment     

Enhanced desorption of fluoxetine from polyethylene terephthalate microplastics in gastric fluid and sea water

There are concerns that microplastics act as a vector of pharmaceuticals in the aquatic environment. Most studies have focussed on pharmaceutical adsorption and have not investigated desorption in the various matrices that microplastics enter. Therefore we studied the desorption of the antidepressant drug fluoxetine from polyethylene terephthalate (PET) microplastics in river water, sea water, and simulated gastric and intestinal fluids. We found that most desorption occurred rapidly, within a few hours of exposure. Fluoxetine desorption fitted well to the Freundlich isotherm with r² values ranging from 0.97 to 0.99. Desorption decreased in the following order: gastric fluid at 20 °C and 37 °C; sea water at 20 °C; intestinal fluid at 20 °C and 37 °C; then river water at 20 °C. The little difference in desorption in gastrointestinal fluids at 20 °C and 37 °C suggests a similar exposure risk to cold- and warm-blooded organisms following PET microplastic ingestion. Total desorption following sequential incubation 2 h in gastric fluid then 4 h in intestinal fluid to mimic gastrointestinal digestion was 37% at 20 °C and 41% at 37 °C. Interestingly, higher desorption of 18–23% occurred in sea water compared to river water, of 4–11%. Under a worst-case scenario, more than 44 mg kg⁻¹ body weight d⁻¹ or more than 52 mg kg⁻¹ body weight d⁻¹ of PET microplastics from river water or sea water, respectively, need to be consumed to exceed the mammalian acceptable daily intake for fluoxetine. Further studies are needed on microplastic ingestion and the bioavailability of adsorbed pharmaceuticals to a range of exposed aquatic organisms.

     

Population dynamics of naturalised Manila clams <Emphasis Type="Italic">Ruditapes philippinarum</Emphasis> in British coastal waters

The Manila clam Ruditapes philippinarum was introduced to Poole Harbour (lat 50°N) on the south coast of England in 1988 as a novel species for aquaculture. Contrary to expectations, this species naturalised. We report on individual growth patterns, recruitment, mortality and production within this population. On the intertidal mudflats the abundance of clams (>5 mm in length) varied seasonally between 18 and 56 individuals m⁻². There appear to be two recruitment events per year and there were 6 year classes in the population. A mid-summer decline in abundance was partly due to increased mortality but probably also a result of down-shore migration in response to high water temperatures and the development of anoxic conditions. A winter fishery removes c 75% of clams of fishable size (maximum shell length ≥40 mm) and c 20% of the annual production. The fishery depresses the maximum age and size attained by the clams but appears to be sustainable. Clam mortality due to factors other than fishing is highest in late-winter to early spring. The growth of the clams is intermediate in comparison with many published studies but remarkably good given their intertidal position. As on the coasts of the Adriatic Sea, where the clam is also non-native, the Manila clam has thrived in a shallow, eutrophic, lagoon-like system on the English coast. While the Poole Harbour population is currently Europe’s most northerly reported self-sustaining, naturalised population, given forecasts of increasing air and sea temperatures it might be expected that this species will eventually spread to more sites around the coasts of Northern Europe with associated economic and ecological consequences.