Divergent neighbors: corporatism and climate policy networks in Finland and Sweden

ABSTRACT

Previous research has suggested that corporatist polities tend to enact more ambitious environmental policies than others. Here it is argued that the macro concept of corporatism can be dissected into three components: inclusiveness, consensualism and strength of tripartite organisations. These components of corporatism can be measured at the meso-level of policy networks. It is proposed that inclusiveness and consensualism are related to ambitious climate policy but exclusive tripartite coalitions can be detrimental for the ambitiousness of climate policy. This argument is backed by evidence from policy network surveys in two similar corporatist countries where climate change policies diverge: Sweden, where policies are ambitious, and Finland, where they are less so. It is found that in Sweden the climate change policy network is more consensual and slightly more inclusive, while in Finland tripartite organisations play a strong role.     

Methane oxidation at a surface-sealed boreal landfill

Methane oxidation was studied at a closed boreal landfill (area 3.9 ha, amount of deposited waste 200,000 tonnes) equipped with a passive gas collection and distribution system and a methane oxidative top soil cover integrated in a European Union landfill directive-compliant, multilayer final cover. Gas wells and distribution pipes with valves were installed to direct landfill gas through the water impermeable layer into the top soil cover. Mean methane emissions at the 25 measuring points at four measurement times (October 2005–June 2006) were 0.86–6.2 m³ ha^?1 h^?1. Conservative estimates indicated that at least 25% of the methane flux entering the soil cover at the measuring points was oxidized in October and February, and at least 46% in June. At each measurement time, 1–3 points showed significantly higher methane fluxes into the soil cover (20–135 m³ ha^?1 h^?1) and methane emissions (6–135 m³ ha^?1 h^?1) compared to the other points (<20 m³ ha^?1 h^?1 and <10 m³ ha^?1 h^?1, respectively). These points of methane overload had a high impact on the mean methane oxidation at the measuring points, resulting in zero mean oxidation at one measurement time (November). However, it was found that by adjusting the valves in the gas distribution pipes the occurrence of methane overload can be to some extent moderated which may increase methane oxidation. Overall, the investigated landfill gas treatment concept may be a feasible option for reducing methane emissions at landfills where a water impermeable cover system is used.     

Assessing the net atmospheric impacts of wood production and utilization

The main objective of the study was to calculate net atmospheric impacts for wood production and utilization in Finnish boreal forest conditions. Net atmospheric impacts were calculated by comparing net CO₂ exchanges of the wood production and utilization to the reference management regime. Net CO₂ exchanges were simulated with a life cycle assessment (LCA) tool for a Scots pine (Pinus sylvestris L.) stand (MT, Myrtillys-type) in central Finland (Joensuu region, 62°39 N, 29°37 E) over two consecutive rotation periods (100?+?100 years/200 years). Net atmospheric impacts were calculated both for sawn timber and pulpwood, and expressed in kgCO₂m^?3. According to the results, the production of pulp and sawn timber produced emissions of 0.20 and 0.59 kgCO₂m^?3 over the 200-year period, respectively, when the unmanagement regime was used as the reference management regime. When 50 % of the processing waste of timber was accounted as an instant emission to the atmosphere, the atmospheric impact increased to 0.55 kgCO₂m^?3 in pulpwood and to 1.27 kgCO₂m^?3 in sawn timber over the 200 year period. When turnover rates of sawn timber in the technosystem were decreased by 30 % and the share of energy use was decreased to 30 %, the atmospheric impact decreased by 17 % and 4 % for pulpwood and sawn timber, respectively, compared to the default wood degradation and energy use of 50 %. The utilized LCA approach provided an effective tool for approaching net atmospheric impacts originating from the ecosystem carbon (C) flows and variable wood utilization. Taking the ecosystem production and utilization of wood (i.e. degradation of technosystem C stock) into account, in terms of net CO₂ exchange, the mitigation possibilities of wood compared to other products can be accounted for more precisely in the future and C sequestration credited more specifically for a certain wood product.     

Is fixed-term employment a new risk for adverse physical working conditions?

Relationships between employment type and the physical work environment were studied among blue-collar workers (n = 1,127). Based on survey data, we set out to compare the evaluations of environmental load and physical strain at work given by fixed-term (17% of all) and permanent workers. The type of employment was not related to environmental load. However, working on a fixed-term basis increased the risk of physical strain at work. Analyses revealed that this connection was evident only among fixed-term construction workers. The results did not support the much-cited view that the disintegration of standard employment has given rise to a new series of work environment problems. Such problems are concentrated in an area with a long tradition of work environment problems, that is, in the construction industry.     

Conversion of dissolved phosphorus in runoff by ferric sulfate to a form less available to algae: Field performance and cost assessment

Conversion of dissolved P by ferric sulfate into a particulate form sparingly available to algae was studied in 15 ditches in Finland using stand-alone dispensers for ferric sulfate administration. Ferric sulfate typically converted 60–70 % of dissolved P into iron-associated form, a process which required 250–650 kg per kg dissolved P. Mean cost was 160 EUR per kg P converted (range 20–400 EUR kg^?1). The costs were lowest at sites characterized by high dissolved P concentrations and small catchment area. At best, the treatment was efficient and cost-effective, but to limit the costs and the risks, ferric sulfate dispensers should only be installed in small critical source areas.     

Protein adducts as biomarkers of exposure to aromatic diisocyanates in workers manufacturing polyurethane (PUR) foam

This work was undertaken to investigate the usefulness of diisocyanate-related protein adducts in blood samples as biomarkers of occupational exposure to toluene diisocyanate (TDI; 2,4- and 2,6-isomers) and 4,4'-methylenediphenyl diisocyanate (MDI). Quantification of adducts as toluene diamines (TDAs) and methylenedianiline (MDA) was performed on perfluoroacylated derivatives by gas chromatography-mass spectrometry (GC-MS/MS) in negative chemical ionisation mode. TDI-derived adducts were found in 77% of plasma and in 59% of globin samples from exposed workers manufacturing flexible polyurethane foam. The plasma levels ranged from 0.003 to 0.58 nmol mL(-1) and those in globin from 0.012 to 0.33 nmol g(-1). The 2,6-isomer amounted to about two-thirds of the sum concentration of TDA isomers. MDI-derived adducts were detected in 3.5% of plasma and in 7% of globin samples from exposed workers manufacturing rigid polyurethane foam. A good correlation was found between the sum of TDA isomers in urine and that in plasma. The relationship between globin adducts and urinary metabolites was ambiguous. Monitoring TDI-derived TDA in plasma thus appears to be an appropriate method for assessing occupational exposure. Contrary to TDI exposure, adducts in plasma or globin were not useful in assessing workers' exposure to MDI. An important outcome of the study was that no amine-related adducts were detected in globin samples from TDI- or MDI-exposed workers, alleviating concerns that TDI or MDI might pose a carcinogenic hazard. Further studies are nevertheless required to judge whether diisocyanates per se could be such a hazard.     

Environmental assessment of gas management options at the Old Ämmässuo landfill (Finland) by means of LCA-modeling (EASEWASTE)

The current landfill gas (LFG) management (based on flaring and utilization for heat generation of the collected gas) and three potential future gas management options (LFG flaring, heat generation and combined heat and power generation) for the Old Ämmässuo landfill (Espoo, Finland) were evaluated by life-cycle assessment modeling. The evaluation accounts for all resource utilization and emissions to the environment related to the gas generation and management for a life-cycle time horizon of 100 yr. The assessment criteria comprise standard impact categories (global warming, photo-chemical ozone formation, stratospheric ozone depletion, acidification and nutrient enrichment) and toxicity-related impact categories (human toxicity via soil, via water and via air, eco-toxicity in soil and in water chronic).The results of the life-cycle impact assessment show that disperse emissions of LFG from the landfill surface determine the highest potential impacts in terms of global warming, stratospheric ozone depletion, and human toxicity via soil. Conversely, the impact potentials estimated for other categories are numerically-negative when the collected LFG is utilized for energy generation, demonstrating that net environmental savings can be obtained. Such savings are proportional to the amount of gas utilized for energy generation and the gas energy recovery efficiency achieved, which thus have to be regarded as key parameters. As a result, the overall best performance is found for the heat generation option – as it has the highest LFG utilization/energy recovery rates – whereas the worst performance is estimated for the LFG flaring option, as no LFG is here utilized for energy generation.Therefore, to reduce the environmental burdens caused by the current gas management strategy, more LFG should be used for energy generation. This inherently requires a superior LFG capture rate that, in addition, would reduce fugitive emissions of LFG from the landfill surface, bringing further environmental benefits.     

Polychlorinated dibenzothlophenes in bleached pulp mill effluents

Polychlorinated dibenzothiophenes, PCDBTs, have been analysed with HRGC/HRMS from different bleached pulp mill effluents. 2,3,7,8-TeCDBT was found to be the dominating TeCDBT isomer in some samples. The estimated concentrations of the TeCDBTs in the samples were < 1 to 60 pg/L. PeCDBTs and other higher chlorinated PCDBTs were not found (< 1 pg/L).