Phosphorus removal in a wetland constructed on former arable land

Phosphorus in surface runoff water may cause eutrophication of recipient water. This study clarifies the mechanisms of P removal in the wetland of Hovi, Finland, constructed on arable land in 1998. Before the construction, the surface soil (removed in the construction) and subsoil (the current wetland bottom) were analyzed for Al and Fe oxides (Al(ox) and Fe(ox)) reactive in P sorption, and for the distribution of P between various pools as well as for P exchange properties. Retention of P from runoff water within the wetland was studied from 1999 to 2001 in situ and factors affecting the P removal (O2 availability and P concentration in water) were investigated in a laboratory microcosm. The processes taking place in the wetland diminished by 68% the total P load and by 49% the dissolved reactive P load. Desorption-sorption tests indicated that without removal of the surface soil, there would have been a risk of the wetland being a source of P, since the equilibrium P concentration of the soil removed was high compared with the mean P concentration of the inflowing water. The subsoil contained less P and high amounts of reactive oxides, which could bind P. Evidently, the P sorption by Al(ox) played an important role in a first phase removal of P, since the wetland retained P efficiently even under anoxic conditions, where Fe tends to be reduced. Fine-textured, mineral soil on the bottom of the wetland (subsoil of the former arable land) seemed to be very efficient in retaining P from agricultural runoff.     

Quantitative analysis of environmental factors in differential weighing of blank Teflon filters

Mass differences less than 100 microg must be correctly measured in gravimetric analysis of particles collected on filters. Even small variations in mass measurement may contribute significant errors to calculated concentrations. In addition to the collected particles, a number of other factors affect the observed mass difference between the measurements before and after sampling. The most often controlled of these factors are static charge, temperature, and humidity. Using 951 laboratory blank filter weights, we have statistically analyzed these and other factors that affect the observed filter weight. Some of these are controllable or correctable; others are not and enter into the final results as errors. The standard deviation of differential blank filter weighing after applying all corrections was 2.7 microg. The most important correctable factors are air buoyancy variation and filter storage time. When weighing blank Teflon filters at relative humidity < 50%, these are an order of magnitude more important than weighing-room humidity. Using field blank filters in each weighing batch could control these three factors but also doubles the errors caused by balance random variation and filter handling contamination, because four weighing measurements and the handling of two filters are needed to obtain one corrected differential mass result.     

Biochemical composition of sedimentary organic matter in the coral reefs of Lakshadweep Archipelago,Indian Ocean

Surface sediments were collected from the shore and lagoons of Kavaratti, Kadamat Agatti and Pitti islands of Lakshadweep Archipelago during May 2015 and analysed for biochemical composition and quality of organic matter. The biochemical composition of sedimentary organic matter from the entire study area was characterised by the dominance of carbohydrates (CHO) followed by proteins (PRT) and finally lipids (LPD). PRT:CHO ratios were less than 1 and indicated the presence of aged organic matter in the islands. The poor nutritional quality of sediments to support benthic fauna was evident from the values of LPD:CHO ratios. The refractory nature of sediments and less availability of food to benthic source was supported by BPC:TOC ratios. Based on estimated ratios and biopolymeric carbon values, the trophic status of the study area was categorised as oligotrophic.     

Allometric variability of heavy metals in corals of Lakshadweep islands

Heavy metal contents of the corals collected from the Lakshadweep archipelago are discussed in the light of allometric variations. Plots of log flesh weight versus log flesh metal concentration exhibited negative correlations for all the nine metals studied. Metals with rapid exchange rate are likely to show such negative correlation and in such situations the elimination rate far exceeds the metal accumulation rate. Similar plots in the skeletal component showed positive correlations. The only linear relationships were observed in log flesh density versus log partition coefficient plots. Comparative flesh enrichment of metals were found to decrease against increasing flesh weights (for both essential and non-essential metals), indicating a regulation of flesh metal burden beyond certain limits. In the skeletal component, anthropogenic input as well as competitive interactions between metal ions having radii similar to that of Ca²⁺ paves way for metal adsorption in calcite/aragonite skeletal lattice of corals.     

Novel process concept for the production of H2 and H2SO4 by SO2-depolarized electrolysis

Outotec open cycle (OOC) is a new low-energy process linking together production of hydrogen and sulfuric acid. While sulfuric acid is the world’s most widely produced chemical by mass at approximately 200 Mt/a, the OOC gives the potential for making 4 Mt/a of hydrogen gas as a by-product. H₂SO₄ manufacture requires a source of sulfur dioxide. 30% of world production of H₂SO₄ is from the SO₂ by-product of pyrometallurgical processing of sulfur containing concentrates of metals such as copper, nickel and zinc. SO₂ can also be made by direct combustion of sulfur. In OOC, a divided electrochemical cell is used for SO₂-depolarized electrolysis of water. SO₂ is fed to the anolyte and converted to H₂SO₄, while hydrogen gas is produced at the cathode. On the industrial scale, the equipment will be in the form of a membrane electrolyzer assembly or stack. A case is described where the OOC would be connected to a pyrometallurgical plant smelting 1 Mt/a of nickel and copper concentrate, producing 1 Mt/a of H₂SO₄ and 20 kt/a of hydrogen.     

Bioconcentration of ibuprofen in fathead minnow (Pimephales promelas) and channel catfish (Ictalurus punctatus)

Pharmaceutical products and their metabolites are being widely detected in aquatic environments and there is a growing interest in assessing potential risks of these substances to fish and other non-target species. Ibuprofen is one of the most commonly used analgesic drugs and no peer-reviewed laboratory studies have evaluated the tissue specific bioconcentration of ibuprofen in fish. In the current study, fathead minnow (Pimephales promelas) were exposed to 250 μg L⁻¹ ibuprofen for 28 d followed by a 14 d depuration phase. In a minimized bioconcentration test design, channel catfish (Ictalurus punctatus) were exposed to 250 μg L⁻¹ for a week and allowed to depurate for 7 d. Tissues were collected during uptake and depuration phases of each test and the corresponding proportional and kinetic bioconcentration factors (BCFs) were estimated. The results indicated that the BCF levels were very low (0.08-1.4) implying the lack of bioconcentration potential for ibuprofen in the two species. The highest accumulation of ibuprofen was observed in the catfish plasma as opposed to individual tissues. The minimized test design yielded similar bioconcentration results as those of the standard test and has potential for its use in screening approaches for pharmaceuticals and other classes of chemicals.     

Spatial variation of phosphorus fractionation in the coral reef sediments of Lakshadweep Archipelago,Indian Ocean

Surface sediments were collected from the shore and lagoons of Kavaratti, Kadamat and Agatti islands of Lakshadweep Archipelago during May 2015 and analysed for the spatial distribution of the micronutrient element, phosphorus. Phosphorus was separated by sequential extraction procedure into five fractions – exchangeable (Ex-P), iron bound, (Fe-P), calcium bound (Ca-P), organic and residual fractions (OP) and total phosphorus (TP). The average relative contribution of each P species to TP was: OP?>?Ca –P?>?Ex – P?>?Fe – P. The high concentration of organic and residual phosphorus (87–96%) compared to inorganic phosphorus is particularly evident at stations characterised by higher total phosphorus concentrations. Among the three forms of IP in the sediments, Ca-P was dominant at all stations. The OC/OP ratio ranged from 3 to 163 in the sediments, suggesting that the organic matter in sediments had been subjected to degradation. Hence, the major contribution towards organic and residual phosphorus form is from the residual fraction comprising biologically resistant or non-available phosphorus form composed of refractory materials. The concentration of phosphorus reported in the present study is higher than that of the earlier studies in Lakshadweep, indicating a terrestrial and anthropogenic in?uence on the sediment.     

Intake fraction distributions for benzene from vehicles in the Helsinki metropolitan area

The intake fraction (iF) gives a measure of the portion of a source's emissions that is inhaled by an exposed population over a defined period of time. This study examines spatial and population-based iF distributions of a known human carcinogen, benzene, from a ubiquitous urban source, local vehicular traffic, in the Helsinki Metropolitan Area using three computational methods. The first method uses the EXPAND model (EXPosure to Air pollution, especially to Nitrogen Dioxide and particulate matter), which incorporates spatial and temporal information on population activity patterns as well as urban-scale and street canyon dispersion models to predict spatial population exposure distributions. The second method uses data from the personal monitoring study EXPOLIS (Air Pollution Exposure Distributions of Adult Urban Populations in Europe) to estimate the intake fractions for individuals in the study. The third method, a one-compartment box model provides estimates within an order-of-magnitude or better for non-reactive agents in an urban area. Population intake fractions are higher using the personal monitoring data method (median iF 30 per million, mean iF 39 per million) compared with the spatial model (annual mean iF 10 per million) and the box model (median iF 4 per million, mean iF 7 per million). In particular, this study presents detailed intake fraction distributions on several different levels (spatial, individual, and generic) for the same urban area.     

Surfactant-induced mobilisation of trace metals from estuarine sediment: implications for contaminant bioaccessibility and remediation

The mobilisation of metals (Al, Fe, Cd, Cu, Mn, Ni, Pb, Sn, Zn) from contaminated estuarine sediment has been examined using commercially available surfactants. Metal release by the anionic surfactant, sodium dodecyl sulphate (SDS), increased with increasing amphiphile concentration up to and above its critical micelle concentration (CMC). Metal mobilisation by the bile acid salt, sodium taurocholate, and the nonionic surfactant, Triton X-100, however, did not vary with amphiphile concentration. SDS was the most efficient surfactant in mobilising metals from the sample, and Cd, Cu and Ni were released to the greatest extents (12-18% of total metal at [SDS] > CMC). Metal mobilisation appeared to proceed via complexation with anionic amphiphiles and denudation of hydrophobic host phases. Surfactants may play an important role in the solubilisation of metals in the digestive environment of deposit-feeding animals and, potentially, in the remediation of metal-contaminated soil and sediment.     

Monitoring of heavy metal partitioning in reef corals of Lakshadweep Archipelago, Indian Ocean

This paper focuses on the partitioning of trace metals in five selected coral species from Lakshadweep Archipelago, which remains as one of the least studied areas in the Indian Ocean. Based on the morphological features, selected coral species are classified as massive (Porites andrewsi), ramose or branching (Lobophyllia corymbosa, Acropora formosa and Psammocora contigua) and foliaceous (Montipora digitata). Relating trace metal concentrations with morphological features in skeleton, highest concentrations of all the trace metals (except Zn) were reported for the ramose type corals. In tissue, all the metals (essential as well as non essential) showed highest concentrations within the branching type corals. Irrespective of their growth characteristics/pattern, all species except P. contigua displayed higher concentrations of Pb, Ni, Mn and Cd within their skeleton compared to tissue which may exemplify a regulatory mechanism to avoid the build up of the concentrations of these metals in their bio-part, strikingly toxic metals like Cd and Pb. The concentrations of trace metals in the skeleton and tissues of these coral species were subjected to 3 way ANOVA based on non standardized original data and the results showed significant differences between metals and between species leading to high skeleton/ tissue - species interaction as well as skeleton/tissue - metal interaction. The significant values of student's t calculated are depicted in the form of Trellis diagrams.