Intake fraction distributions for benzene from vehicles in the Helsinki metropolitan area

The intake fraction (iF) gives a measure of the portion of a source's emissions that is inhaled by an exposed population over a defined period of time. This study examines spatial and population-based iF distributions of a known human carcinogen, benzene, from a ubiquitous urban source, local vehicular traffic, in the Helsinki Metropolitan Area using three computational methods. The first method uses the EXPAND model (EXPosure to Air pollution, especially to Nitrogen Dioxide and particulate matter), which incorporates spatial and temporal information on population activity patterns as well as urban-scale and street canyon dispersion models to predict spatial population exposure distributions. The second method uses data from the personal monitoring study EXPOLIS (Air Pollution Exposure Distributions of Adult Urban Populations in Europe) to estimate the intake fractions for individuals in the study. The third method, a one-compartment box model provides estimates within an order-of-magnitude or better for non-reactive agents in an urban area. Population intake fractions are higher using the personal monitoring data method (median iF 30 per million, mean iF 39 per million) compared with the spatial model (annual mean iF 10 per million) and the box model (median iF 4 per million, mean iF 7 per million). In particular, this study presents detailed intake fraction distributions on several different levels (spatial, individual, and generic) for the same urban area.     

Ditch network maintenance in peat-dominated boreal forests: Review and analysis of water quality management options

The objective of this study was to evaluate the potential of different water management options to mitigate sediment and nutrient exports from ditch network maintenance (DNM) areas in boreal peatland forests. Available literature was reviewed, past data reanalyzed, effects of drainage intensity modeled, and major research gaps identified. The results indicate that excess downstream loads may be difficult to prevent. Water protection structures constructed to capture eroded matter are either inefficient (sedimentation ponds) or difficult to apply (wetland buffers). It may be more efficient to decrease erosion, either by limiting peak water velocity (dam structures) or by adjusting ditch depth and spacing to enable satisfactory drainage without exposing the mineral soil below peat. Future research should be directed towards the effects of ditch breaks and adjusted ditch depth and spacing in managing water quality in DNM areas.     

Strategic planning harnessing urban policy mobilities: the gradual development of local sustainability fix

The aim of our article is to follow how global policy models affect local policy making. Each city has unique local challenges in promoting development, e.g. economic growth, but also needs to find a balance between these targets and demands for sustainable city solutions. In our empirical study, we follow how ideas of waterfront development – to attract new inhabitants and promote economic growth – and global demands of carbon control were used interactively in a strategic spatial planning process in the city of Tampere, Finland. During the six-year planning process, these two policy targets became interdependent, created a new policy-making domain, and led to a combinatorial development of sustainability elements arising from this domain. These findings demonstrate the serial use of global policy models in the creation of a local urban ‘sustainability fix’. To conclude, the intertwinement of diverse global policy models in a city planning process creates easily a recursive cycle that redefines urban sustainability within cities and intercity networks. This perspective makes local policy narratives and strategic planning highly important in urban sustainability research as promoting urban sustainability becomes an inherently ambivalent practice.     

Co-utilisation of CO2 and steelmaking slags for production of pure CaCO3 – legislative issues

The steel industry is characterised by large amounts of CO₂ emissions, but there is no easy means to reduce these emissions. One interesting option for the reduction of CO₂ emissions could be the utilisation of steelmaking slags for carbon dioxide mineralisation. In this option CO₂ is bound with the calcium of the slag material, producing stable carbonate as an end product. The utilisation of steelmaking slags as the raw material for carbon dioxide mineralisation will change the quality of the slags. If, however, this change degrades the slags it could prevent the use of slags in carbon dioxide mineralisation or make it very expensive.The purpose of the research presented here is to evaluate this issue with the help of a case study where the quality of the residual slag from the recently suggested carbonation method was experimentally investigated. The CO₂ mineralisation method, based on steelmaking slags and ammonium salt solutions, was found to change the quality of the slags: the calcium content was reduced, the CaO and Ca(OH)₂ phases were completely dissolved, and the solubility of the V and Cr increased notably. This residual slag would presumably have to be handled as waste. Currently, the steelmaking slag used in the case study is defined as a by-product, but if it is used for CO₂ mineralisation instead of liming its legal status will be re-evaluated. Subsequently, the CO₂ mineralisation process could possibly be defined as an end-of-waste procedure.     

Increased seawater temperature and light during early springs accelerate receptacle growth of Fucus vesiculosus in the northern Baltic proper

In many temperate estuarine areas, ongoing climatic changes are expected to lead to higher seawater temperatures, to increased inflow of freshwater and nutrients (due to increased rainfall) and to altered light conditions. During the last two decades, several winters have been unusually mild in southern Finland, and the subsequent springs have been early. This may have consequences for the seasonality of many species, including the bladder-wrack, Fucus vesiculosus, whose reproductive cycle may be especially sensitive. In the present study, F. vesiculosus receptacles from the field were weighed regularly during three warm (early) springs and compared with receptacles from three cold (late) springs. On average, the first sign of receptacle growth in the field occurred 5–6?weeks earlier and receptacles probably matured 2–3?weeks earlier during the warm springs than during the cold springs. This may be due to differences in seawater temperatures among years, but significantly heavier receptacles at 0.8?m compared to at 3.1?m further suggests the importance of light for receptacle growth as a measure of maturation, since there were no depth-related differences in seawater temperatures. Also, when plotting receptacle wet weights against seawater temperatures, the importance of light can be seen as different regression relationships (slopes and intercepts). In an outdoor aquarium experiment, the effects of temperature and light on receptacle growth were also tested, and there were significant differences between shallow and deep specimens, but temperature and light had no effects, except on initial receptacle growth. Since oogonian development, and thereby the time for zygote release, followed the receptacle growth curve, this could mean a mismatch between the timing of F. vesiculosus zygote settlement and the cover of competing filamentous algae, but such species interactions require further investigations in order to better understand their possible consequences.     

The effect of emissions of fertilizer production on the environment contamination by cadmium and arsenic in southern Brazil

The distribution of cadmium and arsenic in rainwater, surface soil and groundwater in a zone of influence of emissions of a phosphate fertilizer factory has been investigated. The analysis of rainwater along a wind line shows that cadmium in the soluble form precipitates close to emission source, whereas arsenic migrates further and also in the soluble form precipitates at a greater distance. The pH controls the distribution of cadmium and arsenic in rain and groundwater. Concentration of soluble cadmium along the impact line increases with reduction of pH and arsenic, contrary to the increase of pH. Concentrations of cadmium and arsenic in surface soil correlate well among themselves near to emission point. In a zone of confluence of emissions with sea air at a distance from the factory there is sedimentation of arsenic on a geochemical barrier and formation of a separate anomaly in soil.     

Pilot-scale constructed wetlands for petroleum-contaminated groundwater.

A pilot study was conducted to determine the feasibility of using constructed treatment wetlands to remediate recovered groundwater from the subsurface of a former refinery site. The pilot system consisted of four subsurface flow treatment cells operated in an upward vertical flow mode and equipped with subsurface aeration lines. The treatment system showed minimal capability for methyl-tert-butyl ether removal, but did effectively remove total petroleum hydrocarbons-deisel range organics and total benzene, toluene, ethylbenzene, and o-, m-, and p-xylenes (total BTEX). Effluent benzene concentrations were less than 0.05 mg/L in 70% of the samples from a treatment cell using subsurface aeration and a wetland sod amendment. Based on 1 year of operating data, cumulative mass removal approached 80% for benzene and 88% for total BTEX.