Dynamics of water soluble phosphorus from surface applied broiler litter

Deionized water is routinely used as an extractant to determine soluble phosphorus (P) in broiler litter, but under N.E. Georgia conditions this technique may underestimate the hazard of P loss in runoff because the alkalinity of the broiler litter-water suspension limits the solubility of P compounds that may be solubilized after being spread on acidic field conditions. In this study under controlled conditions we measured soluble P in thatch and top soil after applying untreated broiler litter, residue of broiler litter after water extraction (WER), or residue of broiler litter after extraction with a 2-(N-morpholino) ethanesulfonic acid (MES) buffer at pH 6 (BER). During the 60 d incubation, the WER released 18 % more Total Dissolved P (TDP) than was determined through a conventional water extraction procedure, whereas the BER released 28 % less TDP than the WER, which reflects the greater amount of TDP removed from the broiler litter by the buffer at pH 6.0. However, the total amount of TDP extracted by the MES buffer, which includes that removed at the initial extraction plus that released during the incubation, was 30 % greater than the total amount of TDP extracted with water from the untreated litter plus the TDP extracted with water from the WER during the incubation. This result suggests the need to fine-tune the solid: liquid ratio and shaking time when the MES buffer is used.     

Extractability and mobility of mercury from agricultural soils surrounding industrial and mining contaminated areas

This study focussed on a comparison of the extractability of mercury in soils with two different contamination sources (a chlor-alkali plant and mining activities) and on the evaluation of the influence of specific soil properties on the behaviour of the contaminant. The method applied here did not target the identification of individual species, but instead provided information concerning the mobility of mercury species in soil. Mercury fractions were classified as mobile, semi-mobile and non-mobile. The fractionation study revealed that in all samples mercury was mainly present in the semi-mobile phase (between 63% and 97%). The highest mercury mobility (2.7 mg kg(-1)) was found in soils from the industrial area. Mining soils exhibited higher percentage of non-mobile mercury, up to 35%, due to their elevated sulfur content. Results of factor analysis indicate that the presence of mercury in the mobile phase could be related to manganese and aluminium soil contents. A positive relation between mercury in the semi-mobile fraction and the aluminium content was also observed. By contrary, organic matter and sulfur contents contributed to mercury retention in the soil matrix reducing the mobility of the metal. Despite known limitations of sequential extraction procedures, the methodology applied in this study for the fractionation of mercury in contaminated soil samples provided relevant information on mercury's relative mobility.     

Evaluation of Saccharomyces cerevisiae strains as probiotic agent with aflatoxin B(1) adsorption ability for use in poultry feedstuffs

In this study the aflatoxin B(1) (AFB(1)) removal capacity, the tolerance to salivary and gastrointestinal conditions, autoaggregation and coaggregation with pathogenic bacteria of Saccharomyces cerevisiae strains isolated from broiler feces, were evaluated. Only four of twelve isolated strains were identified as Saccharomyces cerevisiae using molecular techniques. The results obtained in AFB(1) binding studies indicated that the amount of AFB(1) removed was both strain and mycotoxin-concentration dependent. Therefore, a theoretical model was applied in order to select the most efficient strain to remove AFB(1) in a wide range of mycotoxin concentration. The results indicated that S. cerevisiae 08 and S. cerevisiae 01 strains were the most efficient microorganisms in the mycotoxin removal. Viability on simulated salivary and gastrointestinal conditions was investigated and S. cerevisiae 08 strain showed the best results, achieving 98% of total survival whereas S. cerevisiae 01 reached only 75%. Autoaggregation and coaggregation assays showed S. cerevisiae 08 as the most appropriate strain, mainly because it was the unique strain able to coaggregate with the four bacterial pathogens assayed. Consequently, S. cerevisiae 08 is the best candidate for future in vivo studies useful to prevent aflatoxicosis. Further quantitative in vitro and in vivo studies are required to evaluate the real impact of yeast-binding activity on the bioavailability of AFB(1) in poultry. However, this study could be useful in selecting efficient strains in terms of AFB(1) binding and provide an important contribution to research into microorganisms with potential probiotic effects on the host.     

Pyrolysis of municipal plastic wastes II: Influence of raw material composition under catalytic conditions

In this work, the results obtained in catalytic pyrolysis of three plastic waste streams which are the rejects of an industrial packing wastes sorting plant are presented. The samples have been pyrolysed in a 3.5 dm(3) reactor under semi-batch conditions at 440 °C for 30 min in nitrogen atmosphere. Commercial ZSM-5 zeolite has been used as catalyst in liquid phase contact. In every case, high HHV gases and liquids which can be useful as fuels or source of chemicals are obtained. A solid fraction composed of the inorganic material contained in the raw materials and some char formed in the pyrolysis process is also obtained. The zeolite has shown to be very effective to produce liquids with great aromatics content and C3-C4 fraction rich gases, even though the raw material was mainly composed of polyolefins. The characteristics of the pyrolysis products as well as the effect of the catalyst vary depending on the composition of the raw material. When paper rich samples are pyrolysed, ZSM-5 zeolite increases water production and reduces CO and CO(2) generation. If stepwise pyrolysis is applied to such sample, the aqueous liquid phase can be separated from the organic liquid fraction in a first low temperature step.     

Contribution to the understanding of biologic concentrations of arsenic in children living in an urban area from Rio de Janeiro,Brazil

Environmental Science and Pollution Research - There are few studies about children’s environmental exposure to arsenic (As) in Brazil, most of them being in mining regions. The objective of...     

Evaluating aeration techniques for decreasing phosphorus export from grasslands receiving manure

Because surface-applied manures can contribute to phosphorus (P) in runoff, we examined mechanical aeration of grasslands for reducing P transport by increasing infiltration of rainfall and binding of P with soil minerals. The effects of three aeration treatments and a control (aeration with cores, continuous-furrow "no-till" disk aeration perpendicular to the slope, slit aeration with tines, and no aeration treatment) on the export of total suspended solids, total Kjeldahl P (TKP), total dissolved P (TDP), dissolved reactive P (DRP), and bioavailable P (BAP) in runoff from grasslands with three manure treatments (broiler litter, dairy slurry, and no manure) were examined before and after simulated compaction by cattle. Plots (0.75 x 2 m) were established on a Cecil soil series with mixed tall fescue (Festuca arundinacea Schreb.)-bermudagrass [Cynodon dactylon (L.) Pers.] vegetation on 8 to 12% slopes. Manures were applied at a target rate of 30 kg P ha(-1), and simulated rainfall was applied at a rate of 85 mm h(-1). Although the impact of aeration type on P export varied before and after simulated compaction, overall results indicated that core aeration has the greatest potential for reducing P losses. Export of TKP was reduced by 55%, TDP by 62%, DRP by 61%, total BAP by 54%, and dissolved BAP by 57% on core-aerated plots with applied broiler litter as compared with the control (p < 0.05). Core and no-till disk aeration also showed potential for reducing P export from applied dairy slurry (p < 0.10). Given that Cecil soil is common in pastures receiving broiler litter in the Southern Piedmont, our results indicate that pairing core aeration of these pastures with litter application could have a widespread impact on surface water quality.     

Reduction of pathogen indicator organisms in dairy wastewater using an ecological treatment system

Ecological treatment systems can provide a sustainable, plant-based alternative to traditional wastewater treatment. One factor essential to the success of these systems is ensuring their ability to reduce coliform concentrations in wastewater. Wastewater is the primary source of fecal contamination in aquatic ecosystems, containing total and fecal coliforms on the order of 10(8)-10(10) and 10(7)-10(9) CFU L(-1), respectively. This study assessed the ability of an ecological treatment system to reduce concentrations of total coliforms and Escherichia coli from dairy wastewater. Low strength wastewater was pumped into the system during July of 2005 and high strength in September 2005. Wastewater passes through a series of anaerobic, aerobic, and clarifier reactors and wetland cells before exiting the system. Regardless of wastewater strength, average total coliform and E. coli concentrations were consistently reduced by at least 99% from influent to effluent, with the majority of the reduction (76%) occurring in the first two reactors. Relationships between internal concentrations of solids and coliforms indicated that increased reduction of solids may further reduce coliform concentrations. Although U.S. Environmental Protection Agency discharge requirements for E. coli were not always met, the substantial reductions achieved indicate that ecological treatment systems have the potential to successfully reduce coliforms in wastewater to meet discharge limits. The results from this study will be used to guide design and management of future ecological treatment systems, so that larger and more consistent coliform reductions can be achieved.     

TG, FT-IR and NMR characterization of n-C16H34 contaminated alumina and silica after mechanochemical treatment

This paper deals with the application of mechanochemistry to model systems composed of alumina or silica artificially contaminated with n-C16H34. The mechanochemical treatment was carried out by means of a ring mill for times ranging from 10 to 40h. Thermogravimetry and infrared and nuclear magnetic resonance spectroscopies were used for the characterization of the mechanochemical products. The results have indicated that, in the case of alumina, almost all the contaminant n-C16H34 undergoes a complex oxidative reaction path whose end products are strongly held on the surface. These end products are most likely made of crosslinked, partially oxidized hydrocarbon chains bond to the solid surface via COO(-) groups. In the case of silica, the hydrocarbon undergoes a different, equally complex reaction path, but to a lower extent. In this case the end products are most probably carbonylic compounds and graphitic carbon. Then, for both solid matrices, the mechanochemical treatment promotes significant modification of the chemical nature of the polluting hydrocarbon with end products much more difficult to remove from the surface. As the systems studied are models of sites contaminated by aliphatic hydrocarbon, the results are worthy of consideration in relation to the mobility of the contaminants in the environment.     

Spectroscopic changes on fulvic acids from a kraft pulp mill effluent caused by sun irradiation

Large volumes of wastewater with a high organic load are generated by the pulp and paper industry that negatively affect the quality of receiving waters. The main waste products in the pulp mill effluents are lignin derived macromolecular compounds, which are similar to natural humic substances and very resistant to wastewater treatments. Fulvic acids (FA) represent the higher percentage of these humic substances and it was observed that solar irradiation modify their properties. Several analytic tools, namely, UV–Visible, molecular fluorescence and FTIR spectroscopies, were used to assess the effect of solar exposition on fulvic acids from a kraft pulp mill effluent. It may be concluded that sun irradiation may alter to a high extent the physicochemical properties of macromolecular organic matter, namely fulvic acids, released by kraft pulp mill effluents. After solar exposition, the aromaticity decreases, the aliphatic structures become more oxygenated, and the fulvic acids from the pulp mill effluent remaining in solution are more similar to aquatic fulvic acids from non polluted sites.     

Wood Modification Effects on Weathering of HDPE-Based Wood Plastic Composites

The effects of weathering on the constituents of wood and polymer matrix behavior in wood plastic composites (WPCs) were investigated. WPCs were produced from pine, extractives-free pine, and pine holocellulose fibers (60%) together with HDPE (40%). These composites were subjected to xenon-arc accelerated and outside weathering for a total of 1200 h and 120 days, respectively. The color and chemical changes that occurred on the surface of the WPCs were analyzed using a set of analytical techniques. For pine and extractive-free pine filled composites, the results showed that the total color change, lightness, and oxidation increased, while the lignin content decreased. In addition, the weight average molecular weight (Mw) and number average molecular weight (Mn) of extracted HDPE decreased with an increase in exposure time of the composites. However, HDPE crystallinity increased with longer exposure time. Lightness of holocellulose-based WPC changed the least while the change in its HDPE crystallinity was not significant compared to the other composite types. Therefore, holocellulose-based WPC may be preferred for applications where color stability is of high priority.