Evaluation of ecological restoration success in mining‐degraded lands

This review article analyzes the importance of assessing the success of ecological restoration by using four indicators: assemblage of the plant and animal communities; enzyme activity; litter accumulation and decomposition; and the improvement of soil quality. These indicators can be used alone or in combinations. Even though the Society for Ecological Restoration International provided a primer containing nine attributes to use as standards for measuring ecological restoration, only three of these attributes could be easily applied due to their low costs and low time requirements. These three attributes include: diversity, vegetation structure, and ecological processes. This review article emphasizes that the criteria for the selection of the indicator species should be based upon: habitat types, abundance of species, ease of measuring, quantifying and interpreting the results, gradual enhancement with time and cost‐effectiveness, sensitivity, variability of response, size, residential status, and requirements of the area. Principal component analysis was applied to calculate the reclaimed mine soil quality index (RMSQI) and the forest soil quality index (FSQI) and the RMSQI value was compared with FSQI (optimum index value of reference ecosystem) to evaluate the restoration success. Available phosphorus, exchangeable magnesium, organic carbon, clay content, field moisture, available nitrogen, electrical conductivity, and pH are identified as the most influential parameters that regulate the health of reclaimed mine soil. Exchangeable calcium, magnesium, cation exchange capacity, sand, silt, clay content, field moisture, available phosphorus, and pH are the controlling properties for forest soil. The observed values of the above‐stated soil indicator properties were converted into a unitless score (0–1.00) and integrated into index calculations (RMSQI and FSQI). The contribution of each soil indicator properties on the calculated index was analyzed, which provides insight into the reason for the measured index. A higher RMSQI indicates better ecological restoration success. The calculated RMSQI was found to be 0.473 in the reclaimed dump, which is 6% lower than the reference ecosystem.     

Performance of a diesel engine with water emulsified diesel prepared with optimized process parameters

An attempt has been made to produce stable water–diesel emulsion with optimal formulation and process parameters and to evaluate the performance and emission characteristics of diesel engine using this stable water–diesel emulsion. A total of 54 samples were prepared with varying water/diesel ratio, surfactant amount and stirring speed and water separation was recorded after 24 and 48 hr of emulsification. The recorded data were used in artificial neural network (ANN)-particle swarm optimization (PSO) technique to find the optimal parameters to produce water–diesel emulsion for engine testing. The predicted optimal parameters were found as 20% water to diesel ratio, 0.9% surfactant and 2200 rpm of stirrer for a water separation of 14.33% in one day with a variation of 6.54% against the actual value of water separation. Water–diesel emulsion fuel exhibited similar fuel properties as base fuel. The peak cylinder gas pressure, peak pressure rise rate and peak heat release rate for water–diesel were found higher as compared to diesel at medium to full engine loads. The improved air-fuel mixing in water–diesel emulsion enhanced brake thermal efficiency (BTE) of engine. The absorption of heat by water droplets present in water–diesel emulsion led to reduced exhaust gas temperature (EGT). With water–diesel emulsion fuel, the mean carbon monoxide (CO), unburned hydrocarbon and oxides of nitrogen (NO_x) emissions reduced by 8.80, 39.60, and 26.11%, respectively as compared to diesel.     

A review of textile industry: Wet processing,environmental impacts,and effluent treatment methods

The word “textile” means to weave and was taken from the Latin word “texere.” Nowadays, textiles not only fulfill humankind's basic necessity for clothing, they also allow individuals to make fashion statements. As one of the oldest industries, the textile industry occupies a unique place in India. It is responsible for 14% of the total industrial manufacture in India. However, the textile industry is also considered to be one of the biggest threats to the environment. Pretreatment, dyeing, printing, and finishing operations are among the various stages of the industrial textile manufacturing process. These fabrication operations not only utilize huge quantities of power and water, they also generate considerable amounts of waste. The textile industry utilizes a number of dyes, chemicals, and other materials to impart the required qualities to the fabrics. These operations produce a significant amount of effluents. The quality of effluents is such that they cannot be put to other uses, and they can create environmental problems if they are disposed of without appropriate treatment. This review discusses different textile processing stages, pollution problems associated with these stages, and their eco‐friendly alternatives. Textile wet processing is described in detail, as it is the key process in the industry and it also generates the greatest amount of pollutants in textile processing. The environmental impact of textile effluents is discussed, as textile effluents not only impose negative effects on the quality of water and soil, they also imperil plant and animal health. In this paper, various methods for treating textile effluents are described. Discussion of physical, chemical, biological, and advanced treatment technologies of effluent treatment are included in this paper.     

广州市城区站点冬季PM2.5时间变化及碳氮同位素组成特征

于2018年冬季在广州城区磨碟沙站点开展细颗粒物(PM_2.5)样品采集,并获得PM_2.5中水溶性离子、含碳组分、稳定碳氮同位素的组成及时间变化特征,重点讨论了PM_2.5浓度升高时段的化学组成特征变化,进而利用稳定碳氮同位素变化特征探究了主要污染来源。结果表明：采样期间,研究站点PM_2.5平均质量浓度为22.1μg/m³,共出现两个PM_2.5浓度水平升高时段,所对应的平均质量浓度分别达46.0μg/m³和63.0μg/m³。风速降低、温度升高等不利气象条件是导致上述时段PM_2.5浓度上升的重要原因。在上述时段,伴随着PM_2.5浓度的升高,NO^-₃和NH⁺₄浓度均出现显著升高,NO^-₃与SO^2-₄的摩...     

Analysis of Meteorological Drought Pattern During Different Climatic and Cropping Seasons in Bangladesh

Drought is one of the most frequent natural disasters in Bangladesh which severely affect agro‐based economy and people's livelihood in almost every year. Characterization of droughts in a systematic way is therefore critical in order to take necessary actions toward drought mitigation and sustainable development. In this study, standardized precipitation index is used to understand the spatial distribution of meteorological droughts during various climatic seasons such as premonsoon, monsoon, and winter seasons as well as cropping seasons such as Pre‐Kharif (March‐May), Kharif (May‐October), and Rabi (December‐February). Rainfall data collected from 29 rainfall gauge stations located in different parts of the country were used for a period of 50 years (1961‐2010). The study reveals that the spatial characteristics of droughts vary widely according to season. Premonsoon droughts are more frequent in the northwest, monsoon droughts mainly occur in the west and northwest, winter droughts in the west, and the Rabi and Kharif droughts are more frequent in the north and northwest of Bangladesh. It is expected that the findings of the study will support drought monitoring and mitigation activities in Bangladesh.     

Removal of doxycycline hydrochloride from aqueous solution by rice husk ash using response surface methodology and disposability study

Environmental Science and Pollution Research - The huge demand and consumption of DOX, its incomplete metabolism, and complex behavior in atmosphere are causing a great ecological issue, which...     

Construction of multifunctional NH2-UiO-66 metal organic framework: sensing and photocatalytic degradation of ketorolac tromethamine and tetracycline in aqueous medium

Environmental Science and Pollution Research - Existence of pharmaceutical residues in water has endangered environmental pollution worldwide, which makes it ineludible to develop prospective...     

Heat storage material: a hope in solar thermal

Environmental Science and Pollution Research - Solar energy is a vast renewable energy source, but uncertainty in the demand and supply of energy due to various geographical regions raises a...     

Five-wheel framework for system-based monitoring of heavy metal pollution in rivers

Sectorial approach for monitoring heavy metal pollution in rivers has failed to report realistic pollution status and associated ecological and human health risks. The increasing spread of heavy metals from different sources and emerging risks to human and environmental health call for reexamining heavy metal pollution monitoring frameworks. Also, the sources, spread, and load of heavy metals in the environment have changed significantly over time, requiring consequent modification in the monitoring frameworks. Therefore, studies on heavy metal monitoring in rivers conducted in the last decade were evaluated for experimental designs, research frameworks, and data presentations. Most studies (∼99%) (i) lacked inclusiveness of all environmental compartments; (ii) focused on “one pollutant – one/two compartment” or sometimes “one pollutant – one compartment – one effect” approach; and (iii) remained “data-rich but information poor.” An ecological approach with integrative system thinking is proposed to develop a holistic approach for monitoring river pollution. It is visualized that heavy metal monitoring, risk analyses, and water management must incorporate tracking pollutants in different environmental compartments of a river (water, sediment, and floodplain/bank soil) and consider correlating it with riverbank land use. The systems-based pollution monitoring and assessment studies will reveal the critical factors that drive heavy metals pollutant movement in ecosystems and associated potential risks to the environment, wildlife, and humans. Also, water quality and pollution indexing tools would help better communicate complex pollution data and associated risks among all stakeholders. Therefore, integrating systems approaches in scientific- and policy-based tools would help sustainably manage the health of rivers, wildlife, and humans.