Personal exposure measurement of students to various microenvironments inside and outside the college campus

This study characterizes the exposure of a typical Indian Institute of Technology Kanpur student to particulate matter and gaseous co-pollutants like carbon monoxide, volatile organic compounds, and nitrogen dioxide in various microenvironments, within and outside the college campus. Chemical analysis of filter, used for the particulate matter measurement, was also carried out to determine the concentration of various elements such as Ca, Cd, Cr, Cu, Fe, Mg, Pb, Zn, and anions like F^?, Cl^?, NO₃ ^?, and SO₄ ^2?. Furthermore, time activity diary along with temperature data was maintained for the precise evaluation and analysis of results for various microenvironments. The results showed PM₁₀ and PM_2.5 concentrations to be higher at some outdoor microenvironments, particularly near the Ganga riverbank. From the chemical analysis, concentrations of chloride and fluoride were found higher in indoor microenvironments as compared to outdoors. Also, nitrate concentrations were quite higher within the laboratory premises. Concentrations of Ca, Fe, and Mg were significant outdoors, whereas Na, Ca, Fe, and K were prominent indoors. The study highlights the real-time personal exposure of a student cohort to various toxic pollutants typically found within their breathing levels and their potential sources both indoors and outdoors.     

Development of an Ozone Forecasting Model for Non-Attainment Areas in the State of Ohio

Ground level ozone is responsible for the formation ofsmog, and for a variety of adverse effects on bothhuman and plant life. High concentrations of groundlevel ozone occur during the summer months. This paperdescribes the development of a model to forecast themaximum daily concentration of ozone as a function ofthe maximum surface temperature, for ozonenon-attainment regions in Ohio. The model wasdeveloped by statistical analysis of existing data.Site-specific models were developed initially. Theverification and evaluation of the performancecriteria of the model at each site were explored bycomparing the model with an independent datasetcollected from that site. A generalized statewidemodel was developed from the site-specific models. Theperformance criteria of this model were verified andevaluated by employing the same independent datasetsemployed for the site-specific models. An exceedencemodel to predict the occurrence of ozone exceedencesover 100 ppb has also been presented.     

Ecological Restoration of Coal Mine‐Degraded Lands in Dry Tropical Climate: What Has Been Done and What Needs to Be Done?

In developed countries, ecological restoration is a widely accepted practice to restore the productivity of degraded coal mine spoils and prevent mine‐degraded sites from acting as sources of pollution. During the past decade, ecologists realized the global need for ecological restoration, and the benefit of restoration is now assessed on the basis of ecosystem services that the restored lands can provide. In this article, the knowledge gap between crude reclamation and ecological restoration is examined, the steps crucial to ecological restoration in tropical conditions are identified, and simple guidelines are given for easy understanding. Restoration issues, such as modification of the forestry restoration approach, reestablishment of biodiversity, removal and reuse of topsoil during progressive and final stages of ecological restoration, drainage, promotion of a plant‐succession‐based approach, use of a grass–legume mixture as an initial colonizer, stabilization of steep slopes, and soil blanketing, are discussed. Those attributes of a degraded ecosystem that are responsible for the success of any restoration project are critically examined, and the opportunities provided by ecological restoration are explored.     

Cell cycle stage specific application of municipal landfill leachates to assess the genotoxicity in root meristem cells of barley (Hordeum vulgare)

Municipal solid wastes (MSW) are unavoidable sources of environmental pollution. Improper disposal of municipal waste results in the leaching of toxic metals and organic chemicals, which can contaminate the surface and ground water leading to serious health hazard. In this study, the toxic effects of the leachate prepared from municipal solid waste samples were examined in root meristem cells of barley (Hordeum vulgare L.) at various stages of cell cycle, i.e., G₁, S, and G₂. Seeds of barley were exposed to 2.5, 5, and 10 % of leachates in soil and aqueous media in 48 h at different cell cycle stages. The physicochemical data of the present study revealed that municipal solid waste leachate contains high amount of heavy metals, which significantly affected growth and physiological activities of barley. Significant inhibition in hypocotyl length, germination, and mitotic index were observed at all concentration of leachate treatment. Induction of chromosomal aberrations (CA’s) and micronuclei (MN) formation were also observed with different concentrations of leachate treatment at 7, 17, and 27 h of presoaking durations, which falls in G₁, S, and G₂ phase of the cell cycle, respectively. Also, exposure of leachate at S phase of the cell cycle had significant effects in barley through chromosomal aberration and micronuclei formation.     

Spatial variability of atrazine and metolachlor dissipation on dryland no-tillage crop fields in Colorado

An area of interest in precision farming is variable-rate application of herbicides to optimize herbicide use efficiency and minimize negative off-site and non-target effects. Site-specific weed management based on field scale management zones derived from soil characteristics known to affect soil-applied herbicide efficacy could alleviate challenges posed by post-emergence precision weed management. Two commonly used soil-applied herbicides in dryland corn (Zea mays L.) production are atrazine and metolachlor. Accelerated dissipation of atrazine has been discovered recently in irrigated corn fields in eastern Colorado. The objectives of this study were (i) to compare the rates of dissipation of atrazine and metolachlor across different soil zones from three dryland no-tillage fields under laboratory incubation conditions and (ii) to determine if rapid dissipation of atrazine and/or metolachlor occurred in dryland soils. Herbicide dissipation was evaluated at time points between 0 and 35 d after soil treatment using a toluene extraction procedure with GC/MS analysis. Differential rates of atrazine and metolachlor dissipation occurred between two soil zones on two of three fields evaluated. Accelerated atrazine dissipation occurred in soil from all fields of this study, with half-lives ranging from 1.8 to 3.2 d in the laboratory. The rapid atrazine dissipation rates were likely attributed to the history of atrazine use on all fields investigated in this study. Metolachlor dissipation was not considered accelerated and exhibited half-lives ranging from 9.0 to 10.7 d in the laboratory.     

Nanoscale materials as sorbents for nitrate and phosphate removal from water

Excessive nitrogen (N) and phosphorous (P) release into run-off waters from human activities is a major cause of eutrophication. Several techniques are available to remove N and P-containing pollutants, such as chemical precipitation, biological treatment, membrane processes, electrolytic treatment, ion-exchange and adsorption. In order to remove low concentration levels of nitrate and phosphate, adsorption is a cost-effective solution. In this review, we present a list of nanoscale adsorbents such as zero-valent metal, metal oxides/metal hydroxides, and carbon-based materials. We discuss their adsorption capacities, isotherms, kinetics and mechanisms.     

Effect of diethyl ether and ethanol as an oxygenated additive on Calophyllum inophyllum biodiesel in CI engine

Environmental Science and Pollution Research - The present experimental investigation is conducted to examine the working characteristics of compression ignition (CI) engine using oxygenated...     

Effect of physical properties of synthesized protic ionic liquid on carbon dioxide absorption rate

Environmental Science and Pollution Research - The concentration of carbon dioxide gas has accelerated over the last two decades which cause drastic changes in the climatic conditions. In...     

Explosibility of polyamide and polyester fibers

The current research is aimed at investigating the explosion behavior of hazardous materials in relation to aspects of particulate size. The materials of study are flocculent (fibrous) polyamide 6.6 (nylon) and polyester (polyethylene terephthalate). These materials may be termed nontraditional dusts due to their cylindrical shape which necessitates consideration of both particle diameter and length. The experimental work undertaken is divided into two main parts. The first deals with the determination of deflagration parameters for polyamide 6.6 (dtex 3.3) for different lengths: 0.3 mm, 0.5 mm, 0.75 mm, 0.9 mm and 1 mm; the second involves a study of the deflagration behavior of polyester and polyamide 6.6 samples, each having a length of 0.5 mm and two different values of dtex, namely 1.7 and 3.3. (Dtex or decitex is a unit of measure for the linear density of fibers. It is equivalent to the mass in grams per 10,000 m of a single filament, and can be converted to a particle diameter.) The explosibility parameters investigated for both flocculent materials include maximum explosion pressure (P_max), size-normalized maximum rate of pressure rise (K_St), minimum explosible concentration (MEC), minimum ignition energy (MIE) and minimum ignition temperature (MIT). ASTM protocols were followed using standard dust explosibility test equipment (Siwek 20-L explosion chamber, MIKE 3 apparatus and BAM oven). Both qualitative and quantitative analyses were undertaken as indicated by the following examples. Qualitative observation of the post-explosion residue for polyamide 6.6 indicated a complex interwoven structure, whereas the polyester residue showed a shiny, melt-type appearance. Quantitatively, the highest values of P_max and K_St were obtained at the shortest length and finest dtex for a given material. For a given length, polyester displayed a greater difference in P_max and K_St at different values of dtex than polyamide 6.6. Long ignition delay times were observed in the BAM oven (MIT measurements) for polyester, and video framing of explosions in the MIKE 3 apparatus (MIE measurements) enabled observation of secondary ignitions caused by flame propagation after the initial ignition occurring at the spark electrodes.     

Survey of nitrogen use pattern in rice in the irrigated rice-wheat cropping system of Haryana, India

Seeing the sustainability of rice-wheat cropping system (RWCS) of the Indo-Gangetic Plain, adequate crop nutrition in general and nitrogen (N) in particular holds the key to sound crop management. The excessive application or insufficient management of N means an economic loss to the farmer and may lead to yield penalties and environmental problems. Improving N management in consonance with other nutrients is much important to break yield plateaus as breeding for high yielding is not happening in recent years. Findings from farm survey are used to evaluate the on-farm N management practices in rice crop of the study area. The crop management practices (especially time of sowing/transplanting and irrigation requirement) and resource base of the farmers decided the N use pattern of the farmers. The N(Physical optimum) and N(economic optimum) exceeding the recommended levels revealed the apparent need for the revalidation of the existing recommendations. Paddy yield increased significantly within different rice types. This study generated comprehensive data on N use pattern in rice in the study area.