Degradation of tannic acid by cold-adapted <Emphasis Type="BoldItalic">Klebsiella</Emphasis> sp NACASA1 and phytotoxicity assessment of tannic acid and its degradation products

Background, aim, and scope  

The focus of the present study is to know the potential of bacterial isolate for tannic acid degradation at low temperature. Also, we tried to evaluate the suitability of phytotoxicity testing protocol for the determination of tannic acid toxicity.     

Assessment and spatial distribution of groundwater quality in industrial areas of Ghaziabad, India

An attempt has been made in this study to evaluate the groundwater quality in two industrial blocks of Ghaziabad district. Groundwater samples were collected from shallow wells, deep wells and hand pumps of two heavily industrialized blocks, namely Bulandshahar road industrial area and Meerut road industrial area in Ghaziabad district for assessing their suitability for various uses. Samples were collected from 30 sites in each block before and after monsoon. They were analyzed for a total of 23 elements, namely, Ag, Al, As, B, Ba, Be, Ca, Cd, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Ni, P, Pb, Se, U, V, and Zn. In addition to these elements, some other parameters were also studied viz: color, odor, turbidity, biological oxygen demand, chemical oxygen demand (COD), dissolved oxygen, total dissolved solids and total suspended solid. The water quality index was also calculated based on some of the parameters estimated. Out of the 23 elements, the mean values of 12 elements, namely, Al, As, Ca, Cd, Cr, Mg, Mn, Na, Ni, Pb, Se, and U, were higher than the prescribed standard limits. The concentrations (in milligram per liter) of highly toxic metals viz., Al, As, Cd, Cr, Ni, Pb, Se, and U, ranged from 1.33–6.30, 0.04–0.54, 0.005–0.013, 4.51–7.09, 0.14–0.27, 0.13–0.32, 0.16–2.11, and 0.10–1.21, respectively, in all groundwater samples, while the permissible limits of these elements as per WHO/BIS standards for drinking are 0.2, 0.01, 0.003, 0.05, 0.07, 0.01, 0.04, and 0.03 mg L^?1, respectively. The EC, pH, and COD in all samples varied from 0.74–4.21, 6.05–7.72, and 4.5–20.0 while their permissible limits are 0.7 dS m^?1, 6.5–8.5, and 10 mg L^?1, respectively. On the basis of the above-mentioned parameters, the water quality index of all groundwater samples ranged from 101 to 491, and 871 to 2904 with mean value of 265 and 1,174 based on two criteria, i.e., physico-chemical and metal contaminations, respectively while the prescribed safe limit for drinking is below 50. The results revealed that the groundwater in the two blocks is unfit for drinking as per WHO/BIS guidelines. The presence of elements like As, Se, and U in toxic amounts is a matter of serious concern.     

Effect of biosludge and biofertilizer amendment on growth of Jatropha curcas in heavy metal contaminated soils

The pot experiments were conducted to evaluate the effect of different concentrations of arsenic, chromium and zinc contaminated soils, amended with biosludge and biofertilizer on the growth of Jatropha curcas which is a biodiesel crop. The results further showed that biosludge alone and in combination with biofertilizer significantly improved the survival rates and enhanced the growth of the plant. With the amendments, the plant was able to grow and survive upto 500, 250 and 4,000 mg kg(-1) of As, Cr and Zn contaminated soils, respectively. The results also showed that zinc enhanced the growth of J. curcas more as compared to other metals contaminated soils. The heavy metal accumulation in plant increased with increasing concentrations of heavy metals in soil, where as a significant reduction in the metal uptake in plant was observed, when amended with biosludge and biofertilizer and biosludge alone. It seems that the organic matter present in the biosludge acted as metal chelator thereby reducing the toxicity of metals to the plant. Findings suggest that plantation of J. curcas may be promoted in metal contaminated soils, degraded soils or wasteland suitably after amending with organic waste.     

Assessment of biological and biochemical indicators in soil under transgenic Bt and non-Bt cotton crop in a sub-tropical environment

There is concern that transgenic Bt-crops carry genes that could have undesirable effects on natural and agro-ecosystem functions. We investigated the effect of Bt-cotton (expressing the Cry 1Ac protein) on several microbial and biochemical indicators in a sandy loam soil. Bt-cotton (MRC-6301Bt) and its non-transgenic near-isoline (MRC-6301) were grown in a net-house on a sandy clay loam soil. Soil and root samples were collected 60, 90, and 120 days after sowing. Soil from a control (no-crop) treatment was also included. Samples were analysed for microbial biomass C, N and P (MBC, MBN, MBP), total organic carbon (TOC), and several soil enzyme activities. The microbial quotient (MQ) was calculated as the ratio of MBC-to-TOC. The average of the three sampling events revealed a significant increase in MBC, MBN, MBP and MQ in the soil under Bt-cotton over the non-Bt isoline. The TOC was similar in Bt and non-Bt systems. Potential N mineralization, nitrification, nitrate reductase, and acid and alkaline phosphatase activities were all higher in the soil under Bt-cotton. Root dry weights were not different (P > 0.05), but root volume of Bt-cotton was higher on 90 and 120 days than that of non-Bt cotton. The time of sampling strongly affected the above parameters, with most being highest on 90 days after sowing. We concluded from the data that there were some positive or no negative effects of Bt-cotton on the studied indicators, and therefore cultivation of Bt-cotton appears to be no risk to soil ecosystem functions.     

Matrix method for evaluation of existing solid waste management system in Himachal Pradesh,India

Journal of Material Cycles and Waste Management - Effective management of Municipal Solid Waste (MSW) is an essential function of the city municipal corporation. The present study reports on the...     

Interdisciplinary models of water systems

To evaluate the complex interactions of various types of water systems, a water resource management agency is invariably involved in the preliminary step of reviewing the available quantitative methods for formulating interdisciplinary aspects of the water systems. With a view to supplement their efforts, an attempt is made in this paper to review briefly the major useful concepts and models which are intended to broaden the technical horizon of the professionals associated with the regional water resource management programs. Initially, various pathways of model building procedure are outlined. Then associated ecological, economic, social, political, technological and environmental models are discussed in light of some reported quantitative examples. With the understanding of the basic mechanics of these interdisciplinary models, the adequacy of these models and their applications can be examined by the concerned professionals to aid the decision making process for the specific water system in question.     

Sensitivity analysis of water quality for Delhi stretch of the River Yamuna,India

Simulation models are used to aid the decision makers about water pollution control and management in river systems. However, uncertainty of model parameters affects the model predictions and hence the pollution control decision. Therefore, it often is necessary to identify the model parameters that significantly affect the model output uncertainty prior to or as a supplement to model application to water pollution control and planning problems. In this study, sensitivity analysis, as a tool for uncertainty analysis was carried out to assess the sensitivity of water quality to (a) model parameters (b) pollution abatement measures such as wastewater treatment, waste discharge and flow augmentation from upstream reservoir. In addition, sensitivity analysis for the “best practical solution” was carried out to help the decision makers in choosing an appropriate option. The Delhi stretch of the river Yamuna was considered as a case study. The QUAL2E model is used for water quality simulation. The results obtained indicate that parameters K ₁ (deoxygenation constant) and K ₃ (settling oxygen demand), which is the rate of biochemical decomposition of organic matter and rate of BOD removal by settling, respectively, are the most sensitive parameters for the considered river stretch. Different combinations of variations in K ₁ and K ₂ also revealed similar results for better understanding of inter-dependability of K ₁ and K ₂. Also, among the pollution abatement methods, the change (perturbation) in wastewater treatment level at primary, secondary, tertiary, and advanced has the greatest effect on the uncertainty of the simulated dissolved oxygen and biochemical oxygen demand concentrations.     

Genotoxicity study of high aspect ratio silver nanowires

The genotoxicity potential of silver nanowires synthesized via the solution-based polyol method has been investigated. They were found to be non-mutagenic in three Salmonella strains and were not genotoxic in a clastogenicity assay in mice. Residual surfactant was found to have an effect on the toxicological properties of the nanowires by increasing the rate of Ag⁺ release. Residual surfactant can be easily degraded via a UV treatment.