Deflection, acceleration, and force corridors for small females in side impacts

OBJECTIVE: This study was undertaken to develop biomechanical corridors applicable to the small-sized female in side impacts. METHODS: Sled tests were conducted using post mortem human subjects at a velocity of 6.7 m/s. Three chestbands were used to compute deflection-time histories at the axilla, xyphoid process, and tenth rib levels. Triaxial accelerometers were fixed to the upper and lower spine and sacrum to record acceleration-time histories. Specimens contacted the load wall with varying initial conditions (rigid and padded; flat wall and offset) from which impact forces to the thoracic, abdominal, and pelvic regions were obtained using load cell data. Adopting signal processing and mass-based scaling methods, corridors were derived for forces, accelerations, and chest deflections at three levels for all initial conditions. RESULTS: All time history corridors were expressed as mean plus/minus one standard deviation and provided in the article. CONCLUSIONS: Acceleration-, deflection-, and force-time corridors obtained for the chest and pelvic regions of the human body will assist in the assessment of anthropomorphic test devices used in crashworthiness evaluations.     

Butachlor degradation in tropical soils: effect of application rate, biotic-abiotic interactions and soil conditions

The degradative characteristics of butachlor (N-Butoxymethyl-2-chloro-2',6'-diethyla- cetanilide) were studied under controlled laboratory conditions in clay loam alluvial (AL) soil (Typic udifluvent) and coastal saline (CS) soil (Typic endoaquept) from rice cultivated fields. The application rates included field rate (FR), 2-times FR (2FR) and 10-times FR (10FR). The incubation study was carried out at 30 degrees C with and without decomposed cow manure (DCM) at 60% of maximum water holding capacity (WHC) and waterlogged soil condition. The half-life values depended on the soil types and initial concentrations of butachlor. Butachlor degraded faster in AL soil and in soil amended with DCM under waterlogged condition. Microbial degradation is the major avenue of butachlor degradation from soils.     

Effect of pencycuron on microbial parameters of waterlogged soil

A laboratory study was conducted to monitor the effect of pencycuron [1-(4-chlorobenzyl)-1-cyclopentyl-3-phenylurea] on microbial parameters of alluvial (AL) soil (Typic udifluvent) and coastal saline (CS) soil (Typic endoaquept) under waterlogged condition. Pencycuron at field rate (FR), 2FR and 10FR affected the microbial biomass C (MBC), soil ergosterol content and fluorescein diacetate hydrolyzing activity (FDHA) differentially. The DCM amendment did not seem to have any counteractive effect on the toxicity of pencycuron on the microbial variables. The change in microbial metabolic quotient (qCO2) and microbial respiration quotient (QR), indicated pencycuron induced disturbance at 10FR. Present study revealed that the metabolically activated microbial population was more suppressed compared to the dormant population.     

THOR dummy chest deflection response in oblique and lateral far-side sled tests

Abstract

Objective: The focus of this study is side impact. Though occupant injury assessment and protection in nearside impacts has received considerable attention and safety standards have been promulgated, field studies show that a majority of far-side occupant injuries are focused on the head and thorax. The 50th percentile male Test Device for Human Occupant Restraint (THOR) has been used in oblique and lateral far-side impact sled tests, and regional body accelerations and forces and moments recorded by load cells have been previously reported. The aim of this study is to evaluate the chestband-based deflection responses from these tests.

Methods: The 3-point belt–restrained 50th percentile male THOR dummy was seated upright in a buck consisting of a rigid flat seat, simulated center console, dashboard, far-side side door structure, and armrest. It was designed to conduct pure lateral and oblique impacts. The center console, dashboard, simulated door structure, and armrest were covered with energy-absorbing materials. A center-mounted airbag was mounted to the right side of the seat. Two 59-gage chestbands were routed on the circumference of the thorax, with the upper and lower chestbands at the level of the third and sixth ribs, respectively, following the rib geometry. Oblique and pure lateral far-side impact tests with and without airbags were conducted at 8.3 m/s. Maximum chest deflections were computed by processing temporal contours using custom software and 3 methods: Procedures paralleling human cadaver studies, using the actual anchor point location and actual alignment of the InfraRed Telescoping Rods for the Assessment of Chest Compression (IR-TRACC) in the dummy on each aspect—that is, right or left,—and using the same anchor location of the internal sensor but determining the location of the peak chest deflection on the contour confined to the aspect of the sensor; these were termed the SD, ID, and TD metrics, respectively.

Results: All deformation contours at the upper and lower thorax levels and associated peak deflections are given for all tests. Briefly, the ID metrics were the lowest in magnitude for both pure lateral and oblique modes, regardless of the presence or absence of an airbag. This was followed by the TD metric, and the SD metric produced the greatest deflections.

Conclusion: The chestbands provide a unique opportunity to compute peak deflections that parallel current IR-TRACC-type deflections and allow computation of peak deflections independent of the initial point of attachment to the rib. The differing locations of the peak deflection vectors along the rib contours for different test conditions suggest that a priori attachment is less effective. Further, varying magnitudes of the differences between ID and TD metrics underscore the difficulty in extrapolating ID outputs under different conditions: Pure lateral versus oblique, airbag presence, and thoracic levels. Deflection measurements should, therefore, not be limited to an instrument that can only track from a fixed point. For improved predictions, these results suggest the need to investigate alternative techniques, such as optical methods to improve chest deflection measurements for far-side occupant injury assessment and mitigation.     

Residual fate and persistence of endosulfan (50 WDG) in Bengal gram (Cicer arietinum)

A detailed study has been presented on heavy metal content of the Iture Estuary. Waters of the Sorowie and Kakum rivers that supply water into the Estuary were investigated to ascertain heavy metal pollution levels due to anthropogenic activities. Concentration s of Cd, Zn, Se and Pb were measured. The study shows pre-occupying pollution levels that constitute a threat to both terrestrial and aquatic ecosystems. The abundance of metals in the Estuary is in the order Zn > Pb > Cd > Se. The level of Cd in the Iture Estuary ranged between 0.011 mg/l and 0.041 mg/l while Se was in the range 0.018 mg/l to 0.029 mg/l, Pb 0.020 mg/l to 0.075 mg/l and Zn 0.040 to 2.45 mg/l. The impact of contaminated water from the Sorowie River on the Iture Estuary was outstanding and the study points out the importance of the Sorowie River as a primary pollution source to the Iture Estuary. The pollution of the Iture Estuary was found to be connected to human activities in its catchments.     

Acute and chronic toxicity of nickel to nitrifiers at different temperatures

This study investigated the acute nickel toxicity on nitrification of low ammonia synthetic wastewater at 10, 23, and 35°C. The nickel inhibition half-velocity constants(K_(I,Ni)) for ammonia oxidizing bacteria(AOB) and nitrite oxidizing bacteria(NOB) based on Ni/MLSS ratio at 10, 23, and 35°C were 5.4 and 5.6 mg Ni/g MLSS, 4.6 and 3.5 mg Ni/g MLSS, and 9.1 and 2.7 mg Ni/g MLSS, respectively. In addition, chronic toxicity of nickel to nitrification of low ammonia synthetic wastewater was investigated at 10°C in two sequencing batch reactors(SBRs). Long-term SBRs operation and short-term batch tests were comparable with respect to the extent of inhibition and corresponding Ni/MLSS ratio. The μ_(max), b, and K_o of AOB were 0.16 day~(-1), 0.098 day~(-1) and 2.08 mg O_2/L after long-term acclimatization to nickel of 1 mg/L at 10°C, high dissolved oxygen(DO)(7 mg/L) and long solids retention time(SRT) of 63–70 days. Acute nickel toxicity of nitrifying bacteria was completely reversible.     

Response surface optimization of a dynamic dye adsorption process: a case study of crystal violet adsorption onto NaOH-modified rice husk

The adsorption of crystal violet from aqueous solution by NaOH-modified rice husk was investigated in a laboratory-scale fixed-bed column. A two-level three factor (2³) full factorial central composite design with the help of Design Expert Version 7.1.6 (Stat Ease, USA) was used for optimisation of the dynamic dye adsorption process and evaluation of interaction effects of different operating parameters: initial dye concentration (100–200 mg L^?1), flow rate (10–30 mL min^?1) and bed height (5–25 cm). A correlation coefficient (R ²) value of 0.999, model F value of 1,936.59 and its low p value (<0.0001) along with lower value of coefficient of variation (1.38 %) indicated the fitness of the response surface quadratic model developed during the present study. Numerical optimisation applying desirability function was used to identify the optimum conditions for a targeted breakthrough time of 12 h. The optimum conditions were found to be initial solution pH?=?8.00, initial dye concentration?=?100 mg L^?1, flow rate?=?22.88 mL min^?1 and bed height?=?18.75 cm. A confirmatory experiment was performed to evaluate the accuracy of the optimised procedure. Under the optimised conditions, breakthrough appeared after 12.2 h and the column efficiency was determined as 99 %. The Thomas model showed excellent fit to the dynamic dye adsorption data obtained from the confirmatory experiment. Thereby, it was concluded that the current investigation gives valuable insights for designing and establishing a continuous wastewater treatment plant.     

Correction to: Multifaceted role of natural sources for COVID-19 pandemic as marine drugs

Environmental Science and Pollution Research -     

Traditional water bodies and ecosystem services: Empirical evidence from West Bengal,India

Traditional water harvesting systems are multi-functional in nature and provide a variety of ecosystem services that contribute to the overall wellbeing of local people. This study aims to identify and analyze the factors influencing the variations in the level of awareness across households residing around three selected traditional water bodies in the Indian state of West Bengal. Ordinary least square (OLS) regression models have been used to identify and analyze the determinants of household perception on ecosystem services from tank water bodies. Results show that while a majority of households have strong perceptions on the provisioning and cultural ecosystem services of the tanks, the household perceptions on regulating and supporting services of the tank is found to be relatively weak. Households belonging to lower caste and poor are likely to be more dependent on ecosystem services from tanks than upper caste and rich households, and hence they have better perceptions of provisioning ecosystem services. Households’ awareness about provisioning ecosystem services is negatively related to their level of education and wealth. It is observed that household awareness about regulating and supporting ecosystem services is positively associated with the level of education of the households, ownership of tube well and private tanks. While it is essential to consider household perception on all the ecosystem services for sustainable use and management of traditional water harvesting systems, incorporating the local norms, customs and preferences in policy design are critical for achieving effective conservation outcomes.     

Distribution of heavy metals and associated human health risk in mine,agricultural and roadside soils at the largest chromite mine of India

Environmental Geochemistry and Health - This study accessed the levels of Cd, Cr, Fe, Mn, Ni, Pb and Zn concentration in soils of different locations (mine, roadside, agricultural and control...