Uncertainty characterization approaches for risk assessment of DBPs in drinking water: A review

The management of risk from disinfection by-products (DBPs) in drinking water has become a critical issue over the last three decades. The areas of concern for risk management studies include (i) human health risk from DBPs, (ii) disinfection performance, (iii) technical feasibility (maintenance, management and operation) of treatment and disinfection approaches, and (iv) cost. Human health risk assessment is typically considered to be the most important phase of the risk-based decision-making or risk management studies. The factors associated with health risk assessment and other attributes are generally prone to considerable uncertainty. Probabilistic and non-probabilistic approaches have both been employed to characterize uncertainties associated with risk assessment. The probabilistic approaches include sampling-based methods (typically Monte Carlo simulation and stratified sampling) and asymptotic (approximate) reliability analysis (first- and second-order reliability methods). Non-probabilistic approaches include interval analysis, fuzzy set theory and possibility theory. However, it is generally accepted that no single method is suitable for the entire spectrum of problems encountered in uncertainty analyses for risk assessment. Each method has its own set of advantages and limitations. In this paper, the feasibility and limitations of different uncertainty analysis approaches are outlined for risk management studies of drinking water supply systems. The findings assist in the selection of suitable approaches for uncertainty analysis in risk management studies associated with DBPs and human health risk.     

Arsenic and chromium removal by mixed magnetite–maghemite nanoparticles and the effect of phosphate on removal

Adsorption of arsenic and chromium by mixed magnetite and maghemite nanoparticles from aqueous solution is a promising technology. In the present batch experimental study, a commercially grade nano-size ‘magnetite’, later identified in laboratory characterization to be mixed magnetite–maghemite nanoparticles, was used in the uptake of arsenic and chromium from different water samples. The intent was to identify or develop a practical method for future groundwater remediation. The results of the study showed 96–99% arsenic and chromium uptake under controlled pH conditions. The maximum arsenic adsorption occurred at pH 2 with values of 3.69 mg/g for arsenic(III) and 3.71 mg/g for arsenic(V) when the initial concentration was kept at 1.5 mg/L for both arsenic species, while chromium(VI) concentration was 2.4 mg/g at pH 2 with an initial chromium(VI) concentration of 1 mg/L. Thus magnetite–maghemite nanoparticles can readily adsorb arsenic and chromium in an acidic pH range. Redox potential and pH data helped to infer possible dominating species and oxidation states of arsenic and chromium in solution. The results also showed the limitation of arsenic and chromium uptake by the nano-size magnetite–maghemite mixture in the presence of a competing anion such as phosphate. At a fixed adsorbent concentration of 0.4 g/L, arsenic and chromium uptake decreased with increasing phosphate concentration. Nano-size magnetite–maghemite mixed particles adsorbed less than 50% arsenic from synthetic water containing more than 3 mg/L phosphate and 1.2 mg/L of initial arsenic concentration, and less than 50% chromium from synthetic water containing more than 5 mg/L phosphate and 1.0 mg/L of chromium(VI). In natural groundwater containing more than 5 mg/L phosphate and 1.13 mg/L of arsenic, less than 60% arsenic uptake was achieved. In this case, it is anticipated that an optimum design with magnetite–maghemite nanoparticles may achieve high arsenic uptake in field applications.     

Searching quality data for municipal solid waste planning

Effective waste reduction and recycling is predicated upon credible data on refuse generation and disposal. Despite improvements in the quality of data for municipal solid wastes (MSW) disposal, dependable generation and recycling statistics to support planning, regulation and administration are lacking. The available aggregates on national waste production from two sources do not conform to each other and fail to serve the requirements of local solid waste planning. As recycling estimates will be difficult to discern, the collection of generation data based on weighing waste samples at generator sites has been portrayed as the key for developing sustainable local databases. The coefficients developed from the databases for the various categories of residential, commercial, industrial and institutional wastes can be used as variables for waste generation models.     

Changes in lipid profiles of liver microsomes of rats following intratracheal administration of DDT or endosulfan

The effect of intratracheal administration of DDT (5 mg/100 g body weight) or endosulfan (1 mg/100 g body weight) to rats for three consecutive days, has been studied on liver lipid metabolism. The administration of DDT but not endosulfan significantly increased the liver weight and the microsomal protein contents. Both DDT and endosulfan treatments significantly increased the contents of microsomal phosphatidylcholine (PC), total-free- and esterified cholesterol. The distribution of unsaturated fatty acids of microsomal PC and PE was increased by DDT treatment. The intratracheal administration of DDT caused fatty infiltration of liver which was probably due to increased synthesis of triglycerides (TG). This is supported by the increased incorporation of radioactive palmitate-1-14C into microsomal TG. However, the increased incorporation of palmitate-1-14C into microsomal PC and phosphatidylethanolamine (PE) after the DDT treatment, was due to the increased transacylation reaction supported by the decreased activity of microsomal phospholipase A. The intratracheal administration of endosulfan did not have pronounced effect on liver fatty infiltration, or transacylation reaction in microsomal PC and PE. However, the results have shown that the treatments of DDT or endosulfan increased the PC contents and the incorporation of radioactive [methyl-3H]choline into PC of microsomes, resulting the increased synthesis of PC via CDPcholine pathway. Thus, the intratracheally administered DDT or endosulfan to rats showed that both the insecticides cause manifestations in the biochemistry of microsomal membrane lipids, although the effects of DDT being more pronounced. Therefore, the translocation effects of these insecticides or metabolites from lung to liver is established.     

Butyltins in water, biofilm, animals and sediments of the west coast of India

Biofilm, fish, oyster, mussel, clam, surface seawater, suspended particulate matter (SPM), and sediment samples were collected from marine and/or estuarine waters of the west coast of India. These samples were analysed for butyltin derivatives such as dibutyltin (DBT) and tributyltin (TBT). The concentrations DBT plus TBT varied between 2.4 and 8.3, 163 and 363 ng/l, 5 and 2853 ng/g dry wt in the SPM, seawater and sediment samples, respectively, of the Marmugao harbour. The values of DBT plus TBT ranged between 0.60 and 29, 123 and 242 ng/l and 1.4 and 65 ng/g dry wt in SPM, water and sediment samples, respectively, collected from the Mandovi estuary. In the Dona Paula Bay the DBT plus TBT varied from 10 to 89 ng/l in surface seawater, and TBT from 10 to 513 ng/g in biofilm samples. For the coastal sediment samples the concentration of DBT plus TBT ranged between 36 and 133 ng/g dry wt of sediment. For the animal samples the DBT plus TBT ranged between 58 and 825 ng/g dry wt of the tissue. Mussel tissues contained the highest amount of DBT plus TBT (825 ng/g dry wt tissue), whereas highest TBT concentration was recorded in the oyster (732 ng/g dry wt). TBT was generally the most abundant butyltin compound in most of the samples suggesting fresh inputs and/or less degradation of TBT. A wide range of the observed butyltin concentrations suggests the presence of localized areas of contamination. Leaching of tributyltin-containing antifouling paints from the ocean going ships, fishing and recreational boats, barges, and the inputs of TBT from the Goa shipyard and dry dock facility situated in the harbour are the probable sources of the DBT and TBT in the samples of the west coast of India. Higher levels of TBT were observed in biofilm relative to that in the surrounding seawater. When fed on TBT contaminated biofilm of the diatom Navicula subinflata, butyltin concentrations in the clam Paphia malabarica increased over the period of feeding suggesting the importance of biofilm in the transfer of butyltins to higher group of organisms.     

Comparative investigation of coal- and oil-fired boilers based on emission factors, ozone and secondary organic aerosol formation potentials of VOCs

Volatile organic compounds(VOCs) are the important precursors of the tropospheric ozone(O_3) and secondary organic aerosols(SOA),both of which are known to harm human health and disrupt the earth's climate system.In this study,VOC emission factors,O_3 and SOA formation potentials were estimated for two types of industrial boilers:coal-fired boilers(n=3) and oil-fired boilers(n=3).Results showed that EVOCs concentrations were more than nine times higher for oil-fire d boilers compared to those for coal-fired boilers.Emission factors of ΣVOCs were found to be higher for oil-fired boilers(9.26-32.83 mg-VOC/kg) than for coal-fired boilers(1.57-4.13 mg-VOC/kg).Alkanes and aromatics were obtained as the most abundant groups in coal-fired boilers,while oxygenated organics and aromatics were the most contributing groups in oil-fired boilers.Benzene,n-hexane and o-ethyl toluene were the abundant VOC species in coal-fired boiler emissions,whereas toluene was the most abundant VOC species emitted from oil-fired boilers.O_3 and SOA formation potentials were found 12 and 18 times,respectively,higher for oil-fired than for coal-fired boilers.Total OFP ranged from 3.99 to 11.39 mg-O_3/kg for coal-fired boilers.For oil-fired boilers,total OFP ranged from 36.16 to 131.93 mg-O_3/kg.Moreover,total secondary organic aerosol potential(SOAP) ranged from 65.4 to 122.5 mg-SOA/kg and 779.9 to 2252.5 mg-SOA/kg for the coal-fired and oil-fired boilers,respectively.     

Effect of pesticides carbaryl and phorate on serum cholesterol level in fish,Clarias batrachus (Linn)

Freshwater edible catfish Clarias batrachus (Linn.) was treated with sublethal concentration of two different groups of pesticides- carbaryl, a carbamate and phorate, an organophosphate for 24 ,72 ,120 and 168 h. The disorders of lipid metabolism were observed in serum. Cholesterol levels in the serum decreased significantly throughout the exposure period with both the pesticides. These results indicate one significant manifestation of the toxic response from the fish under the stress of pesticide exposure.     

Geographic information systems: a tool for strategic ground water quality management

Geographically‐related information is needed for several elements of an integrated ground water quality management programme, including ground water monitoring planning, prioritization of pollution sources, usage of permits and inspections for source control, and planning and completion of remedial actions. Geographic Information Systems (GISs) can be used to support these elements along with delineating wellhead protection areas (WHPAs), prioritizing existing contaminant sources and evaluating proposed changes in land usage in such areas. Eight case studies of the use of GISs in wellhead protection programmes are summarized, including examples from Rhode Island, Mississippi, New Jersey, New York, Pennsylvania, Kansas, Massachusetts and Texas. Six additional examples are mentioned relative to the use of GISs for evaluating ground water pollution potential, facilitating data analysis for environmental restoration of a large area with numerous waste sites, evaluating trends in ground water nitrate contamination, establishing a national database for ground water vulnerability to agricultural chemicals, simulating water table altitudes from stream and drainage basin locations, and selecting radioactive waste dump sites. The applicability of GISs and their associated advantages in wellhead protection and other ground water management studies are demonstrated via the case studies. The GIS technology provides a unique opportunity for analysing and visualizing spatial data. Contaminant and source prioritization within WHPAs is needed for both extant conditions and in the evaluation of proposed land use changes. The coupling of a GIS with contaminant/source prioritization would provide a strategic tool which could be used to plan targeted ground water monitoring programmes, to identify appropriate management or mitigation measures, minimize introduction of contaminants from existing sources into the subsurface environment, and to evaluate the potential of proposed land use activities for causing ground water contamination. GISs can be useful in providing current information for policy makers, planners and managers engaged in ground water quality decision making.